doc improvements

This reverts commit 45dce42475.

.extra_docs.s65

@@ -0,0 +1,72 @@
+;;********************************************************************************
+;; @mainpage 8-bit Breadboard Computer with W65C02S Processor
+;; This repo contains the assembly code for my [6502-project](https://quintern.xyz/de/posts/2021_6502).
+;; 
+;; The assembler used for this project is the excellent [ca65](https://github.com/cc65/cc65).
+;; After assembling it, the binary is loaded onto the  EEPROM using [my *eeprom.py* script](https://git.quintern.xyz/MatthiasQuintern/AT28C256-rpi-util) on a Raspberry Pi 4B.
+;; 
+;; @section main_os Operating System
+;;   ... is probably a far stretch, since it is just the programs I wrote pieced together. My "OS" consists of these functionalities:
+;;   - Supported Hardware:
+;;       - 4x4 Matrix Keypad
+;;       - 4x16 Characters LCD Display
+;;       - PS/2 Keyboard
+;;       - SPI Connection to an Arduino
+;;   - Software
+;;       - @ref ps2_keyboard_printer "Keyboard" and @ref keypad_printer "keypad printer": Prints the characters you press on to the lcd
+;;       <!-- - Temperature: Shows the temperature using a dht sensor. *Work in progress, this does not work yet* -->
+;;       - @ref print_slow "(Stylishly)" print @ref "str::strf" "formated strings" to the LCD
+;;       - @ref sleep "Sleep"
+;;       - Send @ref ps2_keyboard_util "various commands" to the keyboard
+;;       - @ref ringbuffer "Ringbuffer"
+;;   
+;;   > It's not much, but it's honest work.
+;;
+;; @section main_hardware Hardware details
+;;   @subsection main_hw_addr Address Space
+;;     |Name|From|To|r/w|
+;;     |---|---:|---:|:---:|
+;;     |ZEROPAGE   |$00    |$ff    |`rw`|
+;;     |STACK      |$100   |$1ff   |`rw`|
+;;     |RAM        |$200   |$4fff  |`rw`|
+;;     |SPI        |$5000  |$5fff  |`rw`|
+;;     |VIA1       |$6000  |$600f  |`rw`|
+;;     |VIA2       |$7000  |$700f  |`rw`|
+;;     |ROM        |$8000  |$ffff  |`r `|
+;;
+;; 
+;; @section main_software Software details
+;;   @subsection main_sw_naming Naming conventions
+;;     leading underscors `_` indicate a "private" label/variable, that is meant for internal use within the module only.
+;;
+;;     **Labels**:
+;;     - **scopes**: snake case 
+;;     - **subroutines** and **variables**: snake case (`scope::(_)fname_snake_case` or `scope::(_)varname_2`)
+;;     - **macros**: camel case (`(_)GoodMacroname` or `scope_GoodMacroname`)
+;;     - **constants** (eg. in ROM): upper case (`scope::(_)NICE_SYMBOLNAME`)
+;;     - **enums**: upper case (`scope::(_)ENUM_NAME::ENUM_MEMBER`)
+;;********************************************************************************
+
+;;********************************************************************************
+;; @defgroup applications
+;; @brief Applications that do ... *something*
+;;
+;;********************************************************************************
+
+;;********************************************************************************
+;; @defgroup drivers
+;; @brief Code that handles a physical device
+;;
+;;********************************************************************************
+
+;;********************************************************************************
+;; @defgroup libs Libraries
+;; @brief Code that does something useful and is intended to be used in other code
+;;
+;;********************************************************************************
+
+;;********************************************************************************
+;; @defgroup system
+;; @brief Core code
+;;
+;;********************************************************************************

Makefile

@@ -57,3 +57,7 @@ clean:
 	rm -r $(OBJ_DIR)
 	rm $(ROM)
 	rm $(SPI)
+
+docs:
+	doxygen .doxygen_config
+

details.md

@@ -1,19 +0,0 @@
-# Project details
-## Address Space
-|Name|From|To|r/w|
-|---|---:|---:|:---:|
-|ZEROPAGE   |$00    |$ff    |`rw`|
-|STACK      |$100   |$1ff   |`rw`|
-|RAM        |$200   |$4fff  |`rw`|
-|SPI        |$5000  |$5fff  |`rw`|
-|VIA1       |$6000  |$600f  |`rw`|
-|VIA2       |$7000  |$700f  |`rw`|
-|ROM        |$8000  |$ffff  |`r `|
-
-## Naming conventions
-leading underscors `_` indicate a "private" label/variable, that is meant for internal use within the module only.
-### Labels
-- **scopes**: snake case 
-- **subroutines** and **variables**: snake case (`scope::(_)fname_snake_case` or `scope::(_)varname_2`)
-- **macros**: camel case (`(_)GoodMacroname` or `scope_GoodMacroname`)
-- **constants** (eg. in ROM): upper case (`scope::(_)NICE_SYMBOLNAME`)

doxy-asm65.py

@@ -0,0 +1,219 @@
+import sys
+import re
+from typing import Callable
+
+## 
+# @defgroup documentation Documentation
+# @brief
+#
+
+##
+# @file
+# @brief Doxygen filter for ca65 assembler files
+# @details
+#  This filter converts ca65 to C++ statements that doxygen can parse.
+#
+#  Doxygen comments are double semicolons `;;`
+#  - turns procedures `.proc` into function statements with `proc` as return type
+#    Parameters documented with the @param command are put into the paranthesis (function arguments) with `Param` as type (@ref handle_procedure)
+#  - turns macros `.macro` into function statements with `macro` as return type with the parameter macros
+#    as function arguments with `Param` type (@ref handle_procedure)
+#  - enums become ... enums, documentation of enum members after their name is also handled when using ;;< (@ref handle_procedure)
+#  - labeled storage allocations with `.byte`, `.res`, `.ascii` etc. are turned into variable declarations with the label as variable name (@ref handle_procedure)
+#    - if allocations are strings, they are concatenated together to `char * LABEL_NAME = "<string(s)>";`
+#    - if there are multiple non-string allocations: `bytes LABEL_NAME[] = {alloc1, alloc2, ...};`
+#    - if there is one non-string allocation: `alloc_type * LABEL_NAME = alloc;`
+#    - if the allocation is not initilized: `alloc_type * LABEL_NAME;`
+#    - if the allocation type is `res SIZE`: `bytes LABEL_NAME[SIZE];`
+#    - the sizes of the arrays may be wrong!
+#  - include statements are kept
+#  - all other preprocessor macros are removed
+# 
+# @todo Handle structs
+# @todo for storage allocators, check in which segment they are in and apply `const` where necessary
+# @ingroup documentation
+
+filename = "unknown"
+
+def pdebug(*args, **k):
+    print(f"DEBUG ({filename}):", *args, file=sys.stderr, **k)
+
+
+def parse_custom_language(file_content: str):
+    # procedure_name: scope_name
+    exported_names = {}
+    def handle_export(m):
+        export_type = m.groups()[0]
+        scope = m.groups()[1]
+        functions = m.groups()[2].replace(" ", "").strip(",")
+        for f in functions.split(","):
+            # pdebug(f"Add Exported function: '{f}' in '{scope}'")
+            exported_names[f] = scope
+        return ""
+
+    def handle_procedure(m):
+        # print("handle procedure:", m.groups())
+        p_docs = m.groups()[0].strip("\n")
+        p_type = m.groups()[1]
+        p_name = m.groups()[2]
+        p_args = m.groups()[3].strip(" ")
+        p_code = m.groups()[4]
+        s = ""
+        in_namespace = False
+        if p_name in exported_names:
+            # print(f"{p_name} is exported")
+            in_namespace = True
+            # wrap function in namespace {}, which consumes the first line of the docstring, which must be ;;***...
+            namespace = exported_names[p_name]
+            # assert p_docs.startswith(";;*"), f"Documentation of an exported procedure must start with ';;***...' ({p_name})"
+            # assert p_docs[p_docs.rfind('\n'):].startswith("\n;;*"), f"Documentation of an exported procedure must end with ';;***...' ({p_name})"
+            s += f"namespace {namespace}" + " {" + p_docs
+            # s += p_docs[p_docs.find('\n'):p_docs.rfind('\n')]
+            s += "\n"
+            # s += f"@ingroup {namespace}\n"
+        else:
+            s += p_docs + "\n" #re.sub(r";;\*+", ";;", p_docs, 0, re.MULTILINE) + "\n"
+
+        if p_type == "proc":
+            s += f"proc {p_name}("
+            for match in re.finditer(r"[\@\\]param +(.+?) *:", p_docs):
+                s += f"Param {match.groups()[0]},"
+            if s[-1] == ",": s = s[:-1]
+            s += ");\n"
+        elif p_type == "macro":
+            # pdebug(f"Processing macro '{p_name}' with args '{'TXT'.join(p_args.replace(' ', '').split(','))}'")
+            s += f"macro {p_name}("
+            p_args = "".join("Param " + param + "," for param in p_args.replace(" ", "").split(',')).strip(",")
+            s += p_args
+            s += ");\n"
+        elif p_type == "enum":
+            p_code = re.sub(r"(.*=.*?)( *(?:;;.*)?\n)", r"\1,\2", p_code)
+            s += f"enum {p_name}" + "{\n" + p_code + "};"
+        else:
+            raise NotImplementedError(f"handle_procedure not implemented for procedure type {p_type}")
+        s += re.sub(".*", "", p_code)
+        if in_namespace:
+            s += "} // namespace"
+        else:
+            s += "\n"
+        return s
+
+    def handle_storage_label(m):
+        l_docs = m.groups()[0]
+        l_name = m.groups()[1]
+        l_allocs = m.groups()[2]
+        l_docs2 = m.groups()[3]  # if doc was in the same line as the label
+
+        storage_alloc = r"\.(byte|res|dbyte|word|addr|faraddr|dword|asciiz?)(([, ]+(?:0x[a-fA-F0-9]+|0b[01]+|\d+|\w+|\"[^\n]*?[^\\\n]\")[ \n]*)*)"
+        storage_alloc_arg = r"(0x[a-fA-F0-9]+|0b[01]+|\d+|\w+|\"[^\n]*[^\\\n]\")"
+
+        args = []
+        allocs = []
+        for alloc_match in re.finditer(storage_alloc, l_allocs):
+            allocs.append(alloc_match)
+            alloc_args = alloc_match.groups()[1]
+            if alloc_args:
+                args += re.findall(storage_alloc_arg, alloc_args)
+
+        # pdebug(f"Storage label {l_name} with allocs '{[ma.group() for ma in allocs]}' and args '{args}'\n\t{m.groups()}")
+        s = ""
+        in_namespace = False
+        # if the label is exported, put it in a namespace
+        if l_name in exported_names:
+            in_namespace = True
+            namespace = exported_names[l_name]
+            s += f"namespace {namespace}" + " {"
+        # docs after the namespace, otherwise they document the namespace
+        if l_docs:
+            s += l_docs
+        # put the single line comment into a /** */ comment in front of the declaration
+        if l_docs2:
+            s += "/** "
+            if not "brief" in l_docs2: s += "@brief "
+            s += f"{l_docs2.strip(';')} */ "
+        # completely ignoring the type of the storage allocation here
+        if len(args) > 1:
+            if all(arg.startswith("\"") for arg in args):
+                s += f'char* {l_name} = "' + "".join(map(lambda x: x.strip('"'), args)) + '"'
+            else:
+                s += f"bytes {l_name}[{len(args)}] = " + "{"
+                for arg in args:
+                    s += arg + ","
+                s = s.strip(",") + "}"
+        else:
+            l_type = allocs[0].groups()[0]
+            if len(args) == 0:
+                l_arg = None
+            else:
+                l_arg = args[0]
+            # if res: use bytes[length] as type
+            if l_type == "res":
+                l_type = f"bytes[{l_arg}]"
+                l_arg = None
+            # else use type* as type
+            else: l_type += "*"
+            s += f"{l_type} {l_name}"
+            if l_arg:
+                s += f" = {l_arg}"
+        s += ";"
+        if in_namespace: s += "} // namespace"
+        s += m.group().count('\n') * '\n'  # make sure the #lines is the same
+        # pdebug(args, "\n---\n", s)
+        return s
+
+    patterns: dict[str, str|Callable[[re.Match], str]] = {
+        r"\@(?:macro|function)": "@brief",
+        r"^\.scope ([a-zA-Z0-9_]+)": r"namespace \1 {",
+        # r"^\.macro ([a-zA-Z0-9_]+)(.*)?": r"macro \1(\2 \2); ",
+        # r"^\.end(?:macro)": "",
+        r"^\.end(?:scope)": "}",
+        r"^\.(include)": r"#\1",
+        r"^(Export(?:Zp)?) (\w+)((?: *, *\w+)+)": handle_export,
+        r"^(Import(?:Zp)?) (\w+)((?: *, *\w+)+)": "",
+        r"(?<!^;)\$([A-Fa-f0-9_]+)": r"0x\1",   # $HEX -> 0xHEX except in comments
+        r"(?<!^;)%([01_]+)": r"0b\1",           # %BIN -> 0bBIN except in comments
+        r"^((?:;;.*\n)*) *\.(proc|enum|macro) (\w+)(.*?)\n((?:.|\n)*?)\.end(proc|enum|macro).*": handle_procedure,
+        r"^((?:;;.*\n)*) *(\w+):((?:\s*\.(?:byte|res|dbyte|word|addr|faraddr|dword|asciiz?)(?:[, ]+(?:0x[a-fA-F0-9]+|0b[01]+|\d+|\w+|\"[^\n]*[^\\\n]\")[ \n]*)*)+)(;;.*)?": handle_storage_label,
+        r"^INCLUDE_[A-Z0-9_]+ *= *1$": r"",     # Include guard variables
+        r";;": "//!",          # C++ comments
+        # TODO this is currently case sensitive
+        r"(?<!^;)( *\w+ *= *[^;,\n]+?) *(//.*)?$": r"\1;\2",     # semicolons after assignments, except in comments and when they already end with a comma or semicolon. Also preserve comments after the assignment
+        r"^([^\n;]*)(?<!\w)\.(\w+)": r"\1// #\2",   # all .preprocessor commands
+
+    }
+
+    compiled_patterns = []
+    for k,v in patterns.items():
+        compiled_patterns.append((re.compile(k), v))
+
+    resub_patterns: dict[str, str|Callable[[re.Match], str]] = {
+        r"(?<!^;;)[ \t\r\f\v]+": " ",   # turn all spaces into single whitespace except if in doxygen comment
+        r"^((?:[^\"\n;]||[^\"\n;]*\"(?:[^\"\n]|\\\")+\")+);(?!;).*": r"\1",          # remove normal comments, detect strings
+        r"^;;\*+": ";;",                # remove ;;*** comments
+        r"[ \t\r\f\v]+$": "",           # remove trailing spaces print(file_content)
+
+    }
+    for pat, subst in resub_patterns.items():
+        file_content = re.sub(pat, subst, file_content, 0, re.MULTILINE)
+    for pat,subst in patterns.items():
+        (file_content, n_subst) = re.subn(pat, subst, file_content, 0, re.MULTILINE)
+    return file_content
+
+def main():
+    global filename
+    if len(sys.argv) != 2:
+        print("Usage: python doxy-asm65.py <input_file>")
+        sys.exit(1)
+
+    filename = sys.argv[1]
+
+    with open(filename, 'r') as file:
+        file_content = file.read()
+
+    transformed_content = parse_custom_language(file_content)
+
+    print(transformed_content)
+
+if __name__ == "__main__":
+    main()
+

linker.conf

@@ -3,10 +3,11 @@ MEMORY {
     # RAM:    start = $0100, size = $5eff, type = rw, file = "", fill = yes;
     STACK:  start = $0100, size = $0100, type = rw, file = "", fill = yes;
     RAM:    start = $0200, size = $4e00, type = rw, file = "", fill = yes;
-    SPI:    start = $5000, size = $1000, type = rw, file = "../spi.bin", fill = no;
+    SPI:    start = $5000, size = $1000, type = rw, file = "../spi.bin", fill = no, define = yes;
     VIA1:   start = $6000, size = $000f, type = rw, file = "", fill = yes;
     VIA2:   start = $7000, size = $000f, type = rw, file = "", fill = yes;
     ROM:    start = $8000, size = $8000, type = ro, file = %O, fill = yes;
+    TEST:   start = $9000, size = $1000, type = rw, file = "../test.bin";
 }
 SEGMENTS {
     VIA1:           load = VIA1, type = bss;
@@ -14,7 +15,8 @@ SEGMENTS {
     ZEROPAGE:       load = RAM_ZP,  type = bss, start = $0;
     BSS:            load = RAM, type = bss;
     CODE:           load = ROM, type = ro;
-    RODATA:         load = ROM, type = ro;
+    RODATA:         load = ROM, type = ro, align = $800;
     RESET_VECTOR:	load = ROM, type = ro, start = $FFFA;
     SPI:            load = SPI, type = rw;
+    TEST:           load = TEST,type = rw;
 }

main.s65

@@ -1,34 +1,13 @@
 .include "system/system.h65"
+.include "string.h65"
 .export home,homeloop
-.import printer:absolute
+.import keypad_printer:absolute
 .import spi_menu:absolute
+.import ps2_keyboard_printer:absolute
+.import ps2_keyboard_util:absolute
 
 .code
 
-.macro DEBUG_LED_OFF nr
-    pha
-    lda IO1 + IO::RA
-.if nr = 0
-    and #%11111110
-.else
-    and #%11111101
-.endif
-    sta IO1 + IO::RA
-    pla
-.endmacro
-
-.macro DEBUG_LED_ON nr
-    pha
-    lda IO1 + IO::RA
-.if nr = 0
-    ora #%00000001
-.else
-    ora #%00000010
-.endif
-    sta IO1 + IO::RA
-    pla
-.endmacro
-
 ;********************************************************************************    
 ; Modules
 ;********************************************************************************    
@@ -62,12 +41,17 @@ nmi:
     rti
 irq:
     ; read IRFs, while bit 7 ist set handle interrupts
+    ; DEBUG_LED_ON 2
 @irq_io1:
     lda IO1 + IO::IFR
+    and IO1 + IO::IER           ; sometimes CB1/2 IFR set even though not enabled in IER
     sta irq_via_ifr
-    bbr7 irq_via_ifr,@irq_io2  ; skip
+    bbr7 irq_via_ifr,@irq_io2   ; skip
-    bbs2 irq_via_ifr,@irq_kb1  ; shit reg -> first 8 bits
+    bbs2 irq_via_ifr,@irq_kb_sr
-    bbs5 irq_via_ifr,@irq_kb2  ; timer -> last 3 bits
+    bbs3 irq_via_ifr,@irq_kb_cb2
+    bbs4 irq_via_ifr,@irq_kb_cb1  
+    bbs5 irq_via_ifr,@irq_kb_t2  
+    bra @irq_unknown
 @irq_io2:
     lda IO2 + IO::IFR
     sta irq_via_ifr
@@ -75,29 +59,31 @@ irq:
     bbs2 irq_via_ifr,@irq_spi_p     ; check SR
     bbs1 irq_via_ifr,@irq_keypad    ; check CA1
 
+@irq_unknown:
     ; this SHOULD never be reached
-    jsr lcd::clear
     Print "Unknown IRQ"
     ; force reset interrupt flags
     lda #$ff
     sta IO1 + IO::IFR
     sta IO2 + IO::IFR
-    rti
+    bra @irq_return
-    ; bra @irq_return
 @irq_keypad:
     jsr kp::read_irq
     bra @irq_return
 @irq_spi_p:
-    jsr spi_p::read
+    jsr spi_p::irq_read_byte
-    bra @irq_return
-@irq_kb1:
-    ; PrintNC "<30>"
-    jsr $3000
-    bra @irq_return
-@irq_kb2:
-    ; PrintNC "<31>"
-    jsr $3100
     bra @irq_return
+    ; jmp (spi_p::irq_handler)
+    ; JsrIndirect (spi_p::irq_handler), @irq_return
+@irq_kb_sr:
+    ; Print "$3000"
+    JsrIndirect ($3000), @irq_return
+@irq_kb_cb2:
+    JsrIndirect ($3020), @irq_return
+@irq_kb_cb1:
+    JsrIndirect ($3040), @irq_return
+@irq_kb_t2:
+    JsrIndirect ($3060), @irq_return
 ; @irq_dht:
 ;     lda IO1 + IO::T1CL ;T1L2  ; clear interrupt flag
 ;     bra @irq_return
@@ -116,25 +102,20 @@ reset:
     sta IO1 + IO::DDRA
     DEBUG_LED_OFF 0
     DEBUG_LED_OFF 1
-
+    DEBUG_LED_OFF 1
 
     jsr kp::init
 
-    SetCustomChar chars::CAT,0
+    DEBUG_LED_ON 0
-    SetCustomChar chars::SMILEY,1
-    SetCustomChar chars::SMILEY_XD,2
 
+    jsr spi_p::init
+    DEBUG_LED_ON 1
 
-    ; ; INIT DHT
+    ; SetCustomChar chars::CAT,0
-    ; lda #%11000010  ; enable interrupt for Timer 1 and CA1 on IO2
+    ; SetCustomChar chars::SMILEY,1
-    ; sta IER2
+    ; SetCustomChar chars::SMILEY_XD,2
-    ; lda #%00111111  ; set Timer 1 to interrupt when loaded
+
-    ; and ACR2
+    ; DEBUG_LED_ON 2
-    ; sta ACR2
-    ; lda #%00000001  ; set PCR2 bit 0 CA1 pos edge interrupt
-    ; ora PCR2
-    ; sta PCR2 
-    ; stz DHT_STATUS
 
     ; enable interrupts
     cli
@@ -156,7 +137,7 @@ reset:
     lda 0
     ; beq home
     cmp #'A'
-    jeq printer
+    jeq keypad_printer
     cmp #'B'
     jeq spi_menu
     cmp #'C'
@@ -164,19 +145,30 @@ reset:
     cmp #'D'
     jeq print_2
     cmp #'1'
-    beq @debug0_on
+    ; beq @debug0_on
+    beq @ps2_util
     cmp #'2'
-    beq @debug0_off
+    beq @ps2_printer
+    ; beq @debug0_off
     cmp #'4'
     beq @debug1_on
     cmp #'5'
     beq @debug1_off
     cmp #'7'
+    beq @debug2_on
+    cmp #'8'
+    beq @debug2_off
+    cmp #'9'
     beq @print_rb
     cmp #'*'  ; print home menu again if not visible (message 1 and 2 jmp to home)
     beq home
+    wai
     jmp @loop
     
+@ps2_util:
+    jmp ps2_keyboard_util
+@ps2_printer:
+    jmp ps2_keyboard_printer
 @debug0_off:
     DEBUG_LED_OFF 0
     jmp @loop
@@ -189,6 +181,12 @@ reset:
 @debug1_on:
     DEBUG_LED_ON 1
     jmp @loop
+@debug2_off:
+    DEBUG_LED_OFF 2
+    jmp @loop
+@debug2_on:
+    DEBUG_LED_ON 2
+    jmp @loop
 @print_rb:
     jsr lcd::clear
     Print str_io2
@@ -217,20 +215,20 @@ message_1:
     .byte   "      ****      "
     .asciiz "www.quintern.xyz"
 message_2:
-    .byte   "   Hello        "
+    .byte   "0123456789=!?#+*"
-    .byte   "     there      "
+    .byte   "ABCDEFGHIJKLMNOP"
-    .byte   "       <3       "
+    .byte   "QRSTUVWXYZöäüß-_"
-    .asciiz "================"
+    .asciiz "{[(<>)]}$%&/,;.:"
 message_menu: 
-    .byte   "<A> Printer     "
+    .byte   "A/2: KP/KB Print"
-    ; .byte   "<B> Temperatur  "
+    ; .byte   "<B> Temperatur"
-    .byte   "<B> SPI-Menu    "
+    .byte   "1: KB Util      "
-    .byte   "<C> Text 1      "
+    .byte   "B: SPI-Menu     "
-    .asciiz "<D> Text 2      "
+    .asciiz "C/D: Text 1/2   "
-str_spi_begin:
+; str_spi_begin:
-    .asciiz "---BEGIN  SPI---"
+;     .asciiz "---BEGIN  SPI---"
-str_spi_start:
+; str_spi_start:
-    .asciiz "---START  SPI---"
+;     .asciiz "---START  SPI---"
 str_io2:
     .asciiz "IO2::RB='"
 

programs/dht.s65

@@ -1,8 +1,10 @@
 ;;********************************************************************************
-;; @module SPI
+;; @file
-;; @type driver
+;; @brief DHT22 driver (WIP)
+;; @ingroup driver
 ;; @details
 ;; @depends IO-W65C22N
+;; 
 ;;********************************************************************************
 
 ;;TODO EVERYTHING

programs/keypad_printer.h65

@@ -4,7 +4,7 @@
 .ifndef INCLUDE_PRINTER
 INCLUDE_PRINTER = 1
 
-.global printer
+.global keypad_printer
 .import home:absolute
 
 .endif  ; guard

programs/keypad_printer.s65

@@ -0,0 +1,20 @@
+.include "keypad_printer.h65"
+.include "lcd.h65"
+.include "keypad.h65"
+
+.code
+
+;;********************************************************************************
+;; @brief Print characters to the display when a button was pressed
+;; @ingroup applications
+;;********************************************************************************
+.proc keypad_printer
+    jsr lcd::clear
+@printer_loop:
+    jsr kp::read
+    beq @printer_loop
+    cmp #'*'
+    jeq home
+    jsr lcd::print_char
+    bra @printer_loop
+.endproc

programs/memcopy.s65

@@ -3,15 +3,16 @@ INCLUDE_MEMCOPY = 1
 
 .include "system.h65"
 
-.export memcopy
+.export memcopy,memcopy16
 
 .code
-;********************************************************************************
+;;********************************************************************************
-; @function Copy a block of memory to a different address
+;; @function Copy a block of memory to a different address
-; @param ARG0-1: Source address
+;; @param ARG0-1: Source address
-; @param ARG2-3: Target address
+;; @param ARG2-3: Target address
-; @param y: Number of bytes to copy
+;; @param Y: Number of bytes to copy
-;********************************************************************************
+;; @modifies A,Y
+;;********************************************************************************
 .proc memcopy
     cpy #0
     beq @rts
@@ -24,5 +25,41 @@ INCLUDE_MEMCOPY = 1
 @rts:
     rts
 .endproc
+
+;;********************************************************************************
+;; @function Copy a block of memory to a different address
+;; @param ARG0-1: Source address
+;; @param ARG2-3: Target address
+;; @param ARG5-6: Number of bytes to copy (LE)
+;; @modifies A,Y
+;;********************************************************************************
+.proc memcopy16
+    lda ARG6
+    beq @last_page  ; no full page
+    ldy #$ff
+    bra @copy_byte
+@next_page:   ; y is 0
+    lda ARG6
+    beq @rts  ; done
+    inc ARG1
+    inc ARG3
+    dec ARG6
+    beq @last_page
+    ldy #$ff
+@copy_byte:
+    lda (ARG0),y
+    sta (ARG2),y
+@dec_y:
+    dey
+    beq @next_page
+    bra @copy_byte
+@last_page:
+    ldy ARG5
+    dey
+    bra @copy_byte
+@rts:
+    rts
+.endproc
+
 .endif  ; guard
 

programs/print_slow.s65

@@ -5,11 +5,13 @@
 .export print_slow
 
 .code
-;********************************************************************************
+;;********************************************************************************
-; @function Print a null-terminated string
+;; @function Print a null-terminated string with a delay between each character
-; @param ARG0-1: Address of the string to print
+;; @param ARG0-1: Address of the string to print
-; @param x: time to sleep in centiseconds
+;; @param x: time to sleep in centiseconds
-;********************************************************************************
+;; @ingroup applications
+;; @clock_dependent
+;;********************************************************************************
 .proc print_slow
     ldy #$00
 @print_loop:

programs/printer.s65

@@ -1,15 +0,0 @@
-.include "printer.h65"
-.include "lcd.h65"
-.include "keypad.h65"
-
-.code
-.proc printer
-    jsr lcd::clear
-@printer_loop:
-    jsr kp::read
-    beq @printer_loop
-    cmp #'*'
-    jeq home
-    jsr lcd::print_char
-    bra @printer_loop
-.endproc

programs/ps2_keyboard_printer.s65

@@ -0,0 +1,61 @@
+.include "lcd.h65"
+.include "string.h65"
+.include "ps2_keyboard_text_handler.h65"
+
+.export ps2_keyboard_printer
+
+.import home:absolute
+
+.code
+
+;;********************************************************************************
+;; @brief Print characters to the display when a key was pressed
+;; @details
+;;  Print the character that corresponds to a key.
+;;  This uses the @ref kb "text keyboard handler" to correctly handle modifier keys
+;; 
+;;  Controls:
+;;  - `ESC`: Jump home
+;;  - `Print`: Clear the display
+;;  - `F12`: Restart the program
+;; @ingroup applications keyboard
+;;********************************************************************************
+.proc ps2_keyboard_printer
+    jsr lcd::clear
+    jsr kb::init
+    jeq loop
+    ps2kb_PrintCmdFailed
+    ; jmp homeloop
+    ps2kb_CmdEnable
+    jsr ps2kb::begin_receive
+
+loop:
+    wai
+    ; ; put shift, ralt and lalt in debug leds
+    ; lda kb::modifier
+    ; Reverse A
+    ; and #%00000111
+    ; ora IO1 + IO::RANH
+    ; sta IO1 + IO::RANH
+    lda kb::char
+    beq @no_char
+    stz kb::char
+    jsr lcd::print_char
+    bra loop
+@no_char:
+    lda kb::keycode
+    beq loop
+    stz kb::keycode
+    cmp #kb::K::ESCAPE
+    beq @esacpe
+    cmp #kb::K::PRINT
+    beq @clear_display
+    cmp #kb::K::F12
+    jeq ps2_keyboard_printer
+    bra loop
+@esacpe:
+    jmp home
+@clear_display:
+    jsr lcd::clear
+    bra loop
+.endproc

programs/ps2_keyboard_simple_handler.h65

@@ -0,0 +1,38 @@
+;;********************************************************************************
+;; @file
+;; @brief Simple PS/2 keyboard handler
+;; @ingroup libs
+;; @details:
+;;	This module processes keyboard scancodes from the ps2_keyboard driver.
+;;  It requires a PS/2 keyboard that supports scancode set 3.
+;;
+;;  @section what What it does
+;;   - swallow break (release) scancodes
+;;
+;;  This handler is designed for debug purposes.
+;;
+;;  @section usage How to use it
+;;	 Call `kb::init` and check if it was successful (`Z = 1`).
+;;   In your program loop, check if kb::scancode is 0. If it is not, a key has been pressed.
+;;   
+;;   @subsection change_behaviour Changing the keyboard behaviour
+;;    You can change the typematic rate and delay (see PS/2 keyboard command `0xF3`) 
+;;    and the typematic behavior (make, make/release, typematic) for all keys.
+;;    
+;;	  You may also send the echo (`0xEE`) and identify (`0xF2`) commands to the keyboard.
+;;********************************************************************************
+.ifndef INCLUDE_KEYBOARD_SIMPLE
+INCLUDE_KEYBOARD_SIMPLE = 1
+
+.include "ps2_keyboard.h65"
+
+
+;;********************************************************************************
+;; @brief Simple Keyboard Handler
+;;********************************************************************************
+.scope skb
+Import skb, init, scancode
+
+K_BREAK			= $F0
+.endscope
+.endif  ; guard

programs/ps2_keyboard_simple_handler.s65

@@ -0,0 +1,77 @@
+.include "ps2_keyboard_simple_handler.h65"
+Export skb, init, scancode
+
+.bss
+previous_scancode:      .res 1  ; all 1 if previous_scancode is break
+scancode:               .res 1
+
+.code
+;;********************************************************************************
+;; @function Initialize the keyboard handler
+;; @returns Z: Z = 1 => success, Z = 0 => failure
+;; @details
+;;  Initializes the PS/2 keyboard driver and the handler.
+;;  If any PS/2 command fails, init returns with Z = 0. The failed command (and parameter) can be loaded from `ps2kb::send_cmd` and `ps2kb::send_data`
+;;  After init, the keyboard will be able to send scancodes.
+;;********************************************************************************
+.proc init
+    stz scancode
+    stz previous_scancode
+
+    jsr ps2kb::init
+
+    ; init & reset
+    ps2kb_CmdSelfTest
+    ps2kb_WaitFinishCmd
+    lda ps2kb::cmd_response+1
+    cmp #$aa
+    bne fail
+    ; set set 3
+    ps2kb_CmdSetScancodeSet 3
+    ps2kb_WaitFinishCmd
+    lda ps2kb::cmd_response+1
+    cmp #ps2kb::ACK
+    bne fail
+
+    ps2kb_CmdEnable
+    ps2kb_WaitFinishCmd
+    lda ps2kb::cmd_response
+    cmp #ps2kb::ACK
+    bne fail
+
+    StoreDByte process_scancode, ps2kb::scancode_handler
+    jsr ps2kb::begin_receive
+    lda #0  ; set Z = success
+fail:
+    rts
+.endproc
+
+
+;;********************************************************************************
+;; @function Process a scancode
+;; @details
+;;  If it is a 'make' scancode, store it in skb::scancode
+;;  If the key is not a mod key, the keycode is stored in kb::keycode
+;;  If the key is an ascii character, the corresponding ascii character is stored in kb::char
+;; @param X: The scancode
+;; @modifies A, X, Y
+;;********************************************************************************
+.proc process_scancode
+    ; check how this scancode needs to be interpreted
+    bit previous_scancode
+    jmi break_key       ; bit 7 set = BREAK
+
+    lda ps2kb::scancode
+    cmp #skb::K_BREAK
+    beq @break_scancode
+
+    sta scancode
+    rts
+@break_scancode:
+    lda #$ff
+    sta previous_scancode
+    rts
+break_key:
+    stz previous_scancode
+    rts
+.endproc

programs/ps2_keyboard_text_handler.h65

@@ -0,0 +1,201 @@
+; normal
+;;********************************************************************************
+;; @file
+;; @brief PS/2 Keyboard handler for text input
+;; @ingroup libs
+;; @details
+;;	This module processes keyboard scancodes from the ps2_keyboard driver.
+;;  It requires a PS/2 keyboard that supports scancode set 3.
+;;
+;;  @section what What it does
+;;   - keeps track of modifier keys: shift, left/right alt, left right meta (super),
+;;	   control, capslock, numlock, scrollock
+;;	 - convert valid keycodes to chars, dependening on the state of shift and right alt
+;;   - update the keyboard LEDs (numlock, capslock,, scrolllock)
+;;
+;;  This handler is designed for efficient text input.
+;;	It does not track the status of the keys (except modifiers) and is therefore not suitable for games.
+;;  
+;;  @section working_principle How it works
+;;   In the init function, the module disables the *typematic* behaviour for the modifier keys by
+;;	 sending commands to the keyboard. The 3 lock keys will be set to *make only* mode and
+;;   the others to *make release*. 
+;;	 This makes tracking the modifier keys much easier and is the reason why scancode set 3
+;;	 is required, as these commands are only available with this set.
+;;	 
+;;   Using scancode set 3 also adds the benefit that all scancodes are only 1 byte large,
+;;	 making the recognition of scancodes trivial.
+;; 
+;;   Scancodes sent from the keyboard are processed immediately, as the handling functions is called
+;;   from the keyboard's interrupt handler.
+;;   
+;;	 @subsection mapping Mapping keycodes to chars
+;;	  The mapping of keycodes to chars is done using an array of chars for each state:
+;;	  default, shift and right alt. The tables contains the ascii characters, `0` where the keycode does not
+;;    generate a character and `1` where the keycode is a modifier key.
+;;    This approach consumes a relatively large amount of ROM (3 * 144 bytes), but is super fast,
+;;    as loading a character is merely one indexed load instruction.
+;;	  Checking for mod keys is now also fast, beceause we only have to do 1 comparison to see IF it is a modifier key.
+;; 
+;;  @section usage How to use it
+;;	 Call `kb::init` and check if it was successful (`Z = 1`).
+;;   In your program loop, check if `kb::keycode` is 0. If it is not, a key has been pressed.
+;;   
+;;	 If the keypress generated a character `kb::char` will be non-zero and contain the character.
+;;
+;;   Note that if you will probably want to write a 0 to `kb::keycode` and `kb::char` 
+;;   after processing the keycode. This will not be done by the handler.
+;;   
+;;   Conditional branches based on the status of a modifier (`SHIFT`, `RALT`, `LALT`, `CTRL`, `META`, `NUMLOCK`, `SCROLLLOCK`) can be done
+;;   using the `bbs` and `bbr` instructions, as each modifier is represented by a bit of the `kb::modifier` variable
+;;   in the zeropage.
+;;   
+;;   @subsection change_behaviour Changing the keyboard behaviour
+;;    You can change the typematic rate and delay (see PS/2 keyboard command `0xF3`) 
+;;    and the typematic behavior (make, make/release, typematic) for all keys except the modifier keys.
+;;    
+;;	  You may also send the echo (`0xEE`) and identify (`0xF2`) commands to the keyboard.
+;;********************************************************************************
+.ifndef INCLUDE_KEYBOARD_TEXT
+INCLUDE_KEYBOARD_TEXT = 1
+
+.include "ps2_keyboard.h65"
+
+;;********************************************************************************
+;; @brief Keyboard Handler
+;;********************************************************************************
+.scope kb
+Import kb, init, char, keycode
+Import kb, CHARS_NOMOD, CHARS_MODRALT, CHARS_MODSHIFT, CHARS_NUMLOCK_OFF, CHARS_NUMLOCK_ON
+ImportZp kb, modifier
+
+;;********************************************************************************
+;; @brief Bitmask for checking modifier keys
+;;********************************************************************************
+.enum MOD
+    SHIFT   		= %10000000 ; set if either capslock is on or shift is pressed
+    RALT			= %01000000 ; set while rightalt is pressed
+    LALT	 		= %00100000 ; set while leftalt is pressed
+    META	 		= %00010000 ; set while left or right meta is pressed
+    CTRL			= %00001000	; set while left or right ctrl is pressed
+    CAPSLOCK		= %00000100	; ps/2 LED
+    NUMLOCK 		= %00000010 ; ps/2 LED
+	SCROLLLOCK		= %00000001 ; ps/2 LED
+.endenum
+
+;; @brief Scancode that is sent by the keyboard when a key is released
+K_BREAK			= $F0
+
+;;********************************************************************************
+;; @brief S3 German Keycodes
+;;********************************************************************************
+.enum K
+	F1              = $07
+	ESCAPE          = $08
+	TAB             = $0D
+	GRAVE           = $0E
+	F2              = $0F
+	LEFTCTRL        = $11
+	LEFTSHIFT       = $12
+	CAPSLOCK        = $14
+	K_Q             = $15
+	K_1             = $16
+	F3              = $17
+	LEFTALT         = $19
+	K_Y             = $1A
+	K_S             = $1B
+	K_A             = $1C
+	K_W             = $1D
+	K_2             = $1E
+	F4              = $1F
+	K_C             = $21
+	K_X             = $22
+	K_D             = $23
+	K_E             = $24
+	K_4             = $25
+	K_3             = $26
+	F5              = $27
+	SPACE           = $29
+	K_V             = $2A
+	K_F             = $2B
+	K_T             = $2C
+	K_R             = $2D
+	K_5             = $2E
+	F6              = $2F
+	K_N             = $31
+	K_B             = $32
+	K_H             = $33
+	K_G             = $34
+	K_Z             = $35
+	K_6             = $36
+	F7              = $37
+	RIGHTALT        = $39
+	K_M             = $3A
+	K_J             = $3B
+	K_U             = $3C
+	K_7             = $3D
+	K_8             = $3E
+	F8              = $3F
+	COMMA           = $41
+	K_K             = $42
+	K_I             = $43
+	K_O             = $44
+	K_0             = $45
+	K_9             = $46
+	F9              = $47
+	DOT             = $49
+	DASH            = $4A
+	KPDIVIDE        = $4A
+	K_L             = $4B
+	OUML            = $4C
+	K_P             = $4D
+	SSHARP          = $4E
+	KPMINUS         = $4E
+	F10             = $4F
+	AUML            = $52
+	UUML            = $54
+	BACKTICK        = $55
+	F11             = $56
+	PRINT           = $57
+	RIGHTCTRL       = $58
+	RIGHTSHIFT      = $59
+	ENTER           = $5A
+	PLUS            = $5B
+	LESSTHAN        = $5C
+	HASH            = $5D
+	F12             = $5E
+	SCROLLLOCK      = $5F
+	RIGHT           = $60
+	LEFT            = $61
+	PAUSE           = $62
+	UP              = $63
+	DELETE          = $64
+	END             = $65
+	BACKSPACE       = $66
+	INSERT          = $67
+	KP1             = $69
+	DOWN            = $6A
+	KP4             = $6B
+	KP7             = $6C
+	PAGEDOWN        = $6D
+	POS1            = $6E
+	PAGEUP          = $6F
+	KP0             = $70
+	KPDOT           = $71
+	KP2             = $72
+	KP5             = $73
+	KP6             = $74
+	KP8             = $75
+	NUMLOCK         = $76
+	KPENTER         = $79
+	KP3             = $7A
+	KPPLUS          = $7C
+	KP9             = $7D
+	KPASTERISK      = $7E
+	LEFTMETA        = $8B
+	RIGHTMETA       = $8C
+	MENU            = $8D
+.endenum
+
+.endscope
+.endif  ; guard

programs/ps2_keyboard_text_handler.s65

@@ -0,0 +1,310 @@
+.include "ps2_keyboard_text_handler.h65"
+Export kb, init, char, keycode
+Export kb, CHARS_NOMOD, CHARS_MODRALT, CHARS_MODSHIFT, CHARS_NUMLOCK_OFF, CHARS_NUMLOCK_ON
+ExportZp kb, modifier
+
+.zeropage
+;; @ref kb::MOD "status of the modifier keys"
+modifier:               .res 1
+.bss
+;; previous scancode is used to determine if a key was released (BREAK sent previously)
+;; will be $ff if the previous scancode was K_BREAK
+previous_scancode:      .res 1
+;; 0 when no key or non-character key was pressed, otherwise character of the key (with modifiers applied)
+char:                   .res 1
+;; @ref kb::K "keycode" of the last key that was pressed or 0 if none was pressed
+keycode:                .res 1
+
+.code
+;;********************************************************************************
+;; @function Initialize the keyboard handler
+;; @returns Z: Z = 1 => success, Z = 0 => failure
+;; @details
+;;  Initializes the PS/2 keyboard driver and the handler.
+;;  If any PS/2 command fails, init returns with Z = 0. The failed command (and parameter) can be loaded from `ps2kb::send_cmd` and `ps2kb::send_data`
+;;  After init, the keyboard will be able to send scancodes.
+;; @modifies A, X, Y
+;;********************************************************************************
+.proc init
+    stz modifier
+    stz char
+    stz keycode
+    stz previous_scancode
+
+    jsr ps2kb::init
+
+    ; init & reset
+    ps2kb_CmdSelfTest
+    ps2kb_WaitFinishCmd
+    lda ps2kb::cmd_response+1
+    cmp #$aa
+    bne fail
+    ; set set 3
+    ps2kb_CmdSetScancodeSet 3
+    ps2kb_WaitFinishCmd
+    lda ps2kb::cmd_response+1
+    cmp #ps2kb::ACK
+    bne fail
+
+    ; toggle-behaving keys
+    ldx #kb::K::CAPSLOCK
+    jsr set_make
+    ldx #kb::K::NUMLOCK
+    jsr set_make
+    ldx #kb::K::SCROLLLOCK
+    jsr set_make
+
+    ; modifiers
+    ldx #kb::K::LEFTSHIFT
+    jsr set_make_release
+    ldx #kb::K::RIGHTSHIFT
+    jsr set_make_release
+    ldx #kb::K::LEFTCTRL
+    jsr set_make_release
+    ldx #kb::K::RIGHTCTRL
+    jsr set_make_release
+    ldx #kb::K::LEFTALT
+    jsr set_make_release
+    ldx #kb::K::RIGHTALT
+    jsr set_make_release
+    ldx #kb::K::LEFTMETA
+    jsr set_make_release
+    ldx #kb::K::RIGHTMETA
+    jsr set_make_release
+
+    ps2kb_CmdEnable
+    ps2kb_WaitFinishCmd
+    lda ps2kb::cmd_response
+    cmp #ps2kb::ACK
+    bne fail
+
+    StoreDByte process_scancode, ps2kb::scancode_handler
+    jsr ps2kb::begin_receive
+    lda #0  ; set Z = success
+fail:
+    rts
+
+set_make:
+    ; x must be set to scancode
+    lda #$fd
+    bra set
+set_make_release:
+    ; x must be set to scancode
+    lda #$fc
+set:
+    ldy #0
+    jsr ps2kb::send_command
+    ps2kb_WaitFinishCmd
+    lda ps2kb::cmd_response+1
+    cmp #ps2kb::ACK
+    bne fail
+    rts
+.endproc
+
+
+;;********************************************************************************
+;; @function Process a scancode
+;; @details
+;;  Update modifier bits if a mod key is pressed.
+;;  If the key is not a mod key, the keycode is stored in @ref kb::keycode
+;;  If the key is an ascii character, the corresponding ascii character is stored in @ref kb::char
+;; @modifies A, X
+;;********************************************************************************
+.proc process_scancode
+    ; check how this scancode needs to be interpreted
+    ldx ps2kb::scancode
+    bit previous_scancode
+    jmi break_key       ; bit 7 set = BREAK
+
+    cpx #$60  ; codes >= 60 in separate table to reduce memory consumption
+    bcs x_ge_60
+    bbs kb::MOD::SHIFT, modifier, modshift         ; if shift active
+    bbs kb::MOD::RALT, modifier, modralt           ; if ralt active
+
+; load from the correct table, if 0 => non-char, if 1 => non-char but mod, else char
+nomod:
+    lda CHARS_NOMOD,x 
+    bra check_char
+modralt:
+    lda CHARS_MODRALT,x 
+    bra check_char
+modshift:
+    lda CHARS_MODSHIFT,x 
+check_char:
+    beq not_mod     ; 0 => not mod and not char
+    cmp #1          ; 1 => mod
+    beq is_mod
+@char:              ; store char
+    sta char
+not_mod:            ; store keycode if not mod
+    stx keycode
+_rts:
+    rts
+
+x_ge_60:         ; x >= $60
+    cpx #$90  ; only BREAK is higher than 8F, (also code table only has 8F bytes)
+    bcs check_release
+    ; CHARS_NUMLOCK_OFF - CHARS_NOMOD = 60 -> no need to subtract $60 first
+    ; CHARS_NUMLOCK_ON - CHARS_MODSHIFT = 60 -> no need to subtract $60 first
+    bbs kb::MOD::NUMLOCK, modifier, modshift     ; if numlock active
+    lda CHARS_NOMOD,x   
+    bra check_char
+check_release:  ; x >= $90
+    cpx #kb::K_BREAK
+    bne _rts
+    lda #$ff
+    sta previous_scancode
+    rts
+
+is_mod:
+    ; check which mod
+    cpx #kb::K::LEFTSHIFT
+    beq set_shift
+    cpx #kb::K::RIGHTSHIFT
+    beq set_shift
+    cpx #kb::K::RIGHTALT
+    beq set_rightalt
+    cpx #kb::K::LEFTALT
+    beq set_leftalt
+    cpx #kb::K::RIGHTMETA
+    beq set_meta
+    cpx #kb::K::LEFTMETA
+    beq set_meta
+    cpx #kb::K::RIGHTCTRL
+    beq set_ctrl
+    cpx #kb::K::LEFTCTRL
+    beq set_ctrl
+    cpx #kb::K::CAPSLOCK
+    beq toggle_capslock
+    cpx #kb::K::NUMLOCK
+    beq toggle_numlock
+    cpx #kb::K::SCROLLLOCK
+    beq toggle_scrolllock
+
+    ; a real keycode and not a released keycode, twobyte or release scancode
+
+set_ctrl:
+    smb kb::MOD::CTRL, modifier
+    rts
+set_meta:
+    smb kb::MOD::META, modifier
+    rts
+set_leftalt:
+    smb kb::MOD::LALT, modifier
+    rts
+set_rightalt:
+    smb kb::MOD::RALT, modifier 
+    rts
+set_shift:                                              ; process shift
+    bbs kb::MOD::CAPSLOCK, modifier, @unset_shift   ; CAPSLOCK unset shift when capslock is on
+@set_shift:
+    smb kb::MOD::SHIFT, modifier  
+    rts
+@unset_shift:
+    rmb kb::MOD::SHIFT, modifier  
+    rts
+
+toggle_numlock:               ; toggle numlock
+    lda modifier
+    eor #kb::MOD::NUMLOCK   
+    sta modifier
+    bra update_leds
+toggle_scrolllock:             ; toggle numlock
+    lda modifier
+    eor #kb::MOD::SCROLLLOCK
+    sta modifier
+    bra update_leds
+toggle_capslock:              ; toggle capslock & shift
+    lda modifier
+    eor #(kb::MOD::CAPSLOCK | kb::MOD::SHIFT)
+    sta modifier
+    ; fallthrough
+load_update_leds:
+    lda modifier
+update_leds:
+    and #%00000111  ; only bottom 3 bits allowed - otherwise command fails
+    tax
+    ps2kb_CmdSetLeds
+    rts
+.endproc
+
+;;********************************************************************************
+;; @details
+;;  Unset modifier bits if a mod key is released.
+;; @param X: The scancode
+;; @modifies 
+;;********************************************************************************
+.proc break_key
+    ; rmb kb::PREVIOUS::BREAK, kb::previous_scancode 
+    stz previous_scancode
+
+    ; check mod keys
+    cpx #kb::K::LEFTSHIFT
+    beq unset_shift
+    cpx #kb::K::RIGHTSHIFT
+    beq unset_shift
+    cpx #kb::K::RIGHTALT
+    beq unset_rightalt
+    cpx #kb::K::LEFTALT
+    beq unset_leftalt
+    cpx #kb::K::RIGHTMETA
+    beq unset_meta
+    cpx #kb::K::LEFTMETA
+    beq unset_meta
+    cpx #kb::K::RIGHTCTRL
+    beq unset_ctrl
+    cpx #kb::K::LEFTCTRL
+    rts
+unset_shift:                                        ; process shift
+    bbs kb::MOD::CAPSLOCK, modifier, @set_shift     ; set shift when capslock is on
+    rmb kb::MOD::SHIFT, modifier                    ; unset if capslock is off
+    rts
+@set_shift:
+    smb kb::MOD::SHIFT, modifier
+    rts
+unset_ctrl:
+    rmb kb::MOD::CTRL, modifier
+    rts
+unset_meta:
+    rmb kb::MOD::META, modifier
+    rts
+unset_leftalt:
+    rmb kb::MOD::LALT, modifier
+    rts
+unset_rightalt:
+    rmb kb::MOD::RALT, modifier 
+    rts
+.endproc
+
+.rodata
+.align 256
+CHARS_NOMOD:
+	.byte "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00^\x00"
+	.byte "\x00\x01\x01<\x01q1\x00\x00\x01ysaw2\x00"
+	.byte "\x00cxde43\x00\x00 vftr5\x00"
+	.byte "\x00nbhgz6\x00\x00\x01mju78\x00"
+	.byte "\x00,kio09\x00\x00.-l\xEFp\xE2\x00"
+	.byte "\x00\x00\xE1#\xF5`\x00\x00\x01\x01\x00\x00\x00\x00\x00\x01"
+;; numlock range characters where numlock is off
+CHARS_NUMLOCK_OFF:
+	.byte "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"
+	.byte "\x00\x00\x00\x00\x00\x00\x01/\x00\x00\x00\x00+\x00*\x00"
+	.byte "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x01\x00-\x00"
+CHARS_MODSHIFT:
+	.byte "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xDF\x00"
+	.byte "\x00\x01\x01>\x01Q!\x00\x00\x01YSAW\"\x00"
+	.byte "\x00CXDE$\xED\x00\x00 VFTR%\x00"
+	.byte "\x00NBHGZ&\x00\x00\x01MJU/(\x00"
+	.byte "\x00;KIO=)\x00\x00:_L\xEFP\xE2\x00"
+	.byte "\x00\x00\xE1'\xF5`\x00\x00\x01\x01\x00\x00\x00\x00\x00\x01"
+CHARS_NUMLOCK_ON:
+	.byte "\x00\x00\x00\x00\x00\x00\x00\x00\x001\x0047\x00\x00\x00"
+	.byte "0.2568\x01\x00\x00\x003\x00\x009\x00\x00"
+	.byte "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x01\x00\x00\x00"
+CHARS_MODRALT:
+	.byte "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xFF\x00"
+	.byte "\x00\x01\x01|\x01\x00\x00\x00\x00\x01\x00\x00\x00\x00\x00\x00"
+	.byte "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"
+	.byte "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00\x00\x00{[\x00"
+	.byte "\x00\x00\x00\x00\x00}]\x00\x00\xA5\xB0\x00\x00\x00\x00\x00"
+	.byte "\x00\x00\x00\x00\x00\x00\x00\x00\x01\x01\x00\x00\x00\x00\x00\x01"

programs/ps2_keyboard_util.s65

@@ -0,0 +1,159 @@
+.include "system.h65"
+.include "string.h65"
+.include "keypad.h65"
+.include "lcd.h65"
+.include "ps2_keyboard_simple_handler.h65"
+.include "ps2_keyboard_text_handler.h65"
+
+.export ps2_keyboard_util
+
+.import home:absolute
+
+.code
+
+;;********************************************************************************
+;; @brief Send various commands to the keyboard and print the response bytes
+;; @details
+;; - `0`: `0xf0` query scancode set 
+;; - `1`: `0xee` echo
+;; - `2`: `0xf2` identify
+;; - `3`: `0xf3` set typematic min speed and delay (`0b0111111`)
+;; - `4`: `0xf4` enable
+;; - `5`: `0xf5` disable
+;; - `6`: `0xf3` set typematic max speed and min delay (`0b00000000`)
+;; - `7`: `0xf7` set typematic all
+;; - `8`: `0xf8` set make/release all
+;; - `9`: `0xed` set CAPSLOCK led
+;; - `#`: `0xed` set SCROLLLOCK led
+;; - `C`: `0xed` set NUMLOCK led
+;; - `D`: `0xed` turn all leds off
+;; - `A`: reprint menu
+;; - `B`: reprint menu
+;; - `*`: jump home
+;; For more details, see https://wiki.osdev.org/PS/2_Keyboard
+;; @ingroup applications
+;;********************************************************************************
+.proc ps2_keyboard_util
+    stz kp::_DEBUG_VAL
+    jsr skb::init
+    beq print_menu
+    ps2kb_PrintCmdFailed
+    bra loop
+print_menu:
+    Print MENU
+loop:
+    wai
+    lda skb::scancode
+    beq @read_keypad
+    Printf FMT_CODE,skb::scancode
+    stz skb::scancode
+@read_keypad:
+    lda kp::_DEBUG_VAL
+    jeq loop
+    stz kp::_DEBUG_VAL
+    cmp #'*'
+    jeq home
+    pha
+    jsr lcd::clear
+    pla
+    ldy #0      ; arg for commands
+    ldx #ps2kb::NO_DATA
+    cmp #'0'
+    beq @l0
+    cmp #'1'
+    beq @l1
+    cmp #'2'
+    beq @l2
+    cmp #'3'
+    beq @l3
+    cmp #'4'
+    beq @l4
+    cmp #'5'
+    beq @l5
+    cmp #'6'
+    beq @l6
+    cmp #'7'
+    beq @l7
+    cmp #'8'
+    beq @l8
+    cmp #'9'
+    beq @l9
+    cmp #'#'
+    beq @lhash
+    cmp #'A'
+    beq @lA
+    cmp #'B'
+    beq @lB
+    cmp #'C'
+    beq @lC
+    cmp #'D'
+    beq @lD
+    jsr lcd::print_char
+    jmp loop
+
+@l0:                ; get scancode set
+    lda #$f0
+    ldx #0
+    ldy #1
+    bra @send_cmd
+@l1:                ; echo
+    lda #$ee
+    bra @send_cmd
+@l2:                ; identify
+    lda #$f2
+    ldy #2
+    bra @send_cmd
+@l3:                ; set typematic min speed and delay
+    lda #$f3
+    ldx #%01111111  
+    bra @send_cmd
+@l4:                ; enable
+    lda #$f4
+    bra @send_cmd
+@l5:                ; disable
+    lda #$f5
+    bra @send_cmd
+@l6:                ; set typematic max speed and min delay
+    lda #$f3
+    ldx #0 
+    bra @send_cmd
+@l7:                ; set typematic all
+    lda #$f7
+    bra @send_cmd
+@l8:                ; set make/release all
+    lda #$f8
+    bra @send_cmd
+@l9:                ; set CAPSLOCK led
+    lda #$ed
+    ldx #kb::MOD::CAPSLOCK
+    bra @send_cmd
+@lhash:             ; set SCROLLLOCK led
+    lda #$ed
+    ldx #kb::MOD::SCROLLLOCK
+    bra @send_cmd
+@lC:                ; set NUMLOCK led
+    lda #$ed
+    ldx #kb::MOD::NUMLOCK
+    bra @send_cmd
+@lD:                ; turn all leds off
+    lda #$ed
+    ldx #0
+    bra @send_cmd
+@lA:
+    ; TODO
+@lB:                ; reprint menu
+    jmp print_menu
+@send_cmd:
+    jsr ps2kb::send_command
+    ps2kb_WaitFinishCmd
+    Printf FMT_CMD_DATA, ps2kb::send_cmd, ps2kb::send_data, ps2kb::cmd_response, ps2kb::cmd_response+1, ps2kb::cmd_response+2
+    jmp loop
+.endproc
+
+.rodata
+FMT_CODE:       .asciiz "K %x            "
+FMT_CMD_DATA:   .asciiz "C %x-%x > %x%x%x"
+MENU: .byte   " EE  F2  F3     "
+      .byte   " F4  F5  F3' MEN"
+      .byte   " T1  T0  LC  LN "
+      .asciiz " RET F0  LS  L0 "

programs/sleep.s65

@@ -3,14 +3,16 @@
 .export sleep
 
 .code
-;********************************************************************************
+;;********************************************************************************
-; @function sleep
+;; @function sleep
-; @param x: Time to sleep in centiseconds (10^-2s = 10ms)
+;; @param x: Time to sleep in centiseconds (10^-2s = 10ms) @ 1MHz
-; @details
+;; @details
-;   Interrupts might change the actual time to finish
+;;   Interrupts might change the actual time to finish
-;   To be exact, time_cs is in units of 0.010244s
+;;   To be exact, time_cs is in units of 0.010244s
-; @modifies: ARG15
+;; @modifies ARG15
-;********************************************************************************
+;; @ingroup applications 
+;; @clock_dependent
+;;********************************************************************************
 .proc sleep
 _VAR_1 = ARG15
     stz _VAR_1

programs/spi-menu.s65

@@ -4,44 +4,76 @@
 .include "lcd.h65"
 .include "chars.h65"
 .import home:absolute
-.import SPI_IO
+.import CODE_START: absolute
+.import __SPI_SIZE__
 
 .export spi_menu
 .bss
-trans_bytes: .res 1
+trans_bytes: .res 2   ;; used to check if screen needs to be updated
-trans_pages: .res 1
+status_char: .res 1
-status:      .res 1
+status_str:  .res 17  ;; space for 16 + null
-status_str:  .res 17  ; 16 + null
 
 .code
+;;********************************************************************************
+;; @brief Receive code via SPI and execute it
+;; @ingroup applications
+;;********************************************************************************
 .proc spi_menu
     stz trans_bytes
-    stz trans_pages
+    stz trans_bytes+1
-    lda #'X'
-    sta status
 @print_menu:
     jsr lcd::clear
     Print MENU
+
+@update_status:
+    lda spi_p::status
+    cmp #spi_p::STATUS::ERROR
+    beq @status_ERROR
+    cmp #spi_p::STATUS::DONE
+    beq @status_DONE
+    cmp #spi_p::STATUS::XFER
+    beq @status_XFER
+    cmp #spi_p::STATUS::XFER_SIZEL
+    beq @status_XFER_SIZEL
+    cmp #spi_p::STATUS::XFER_SIZEH
+    beq @status_XFER_SIZEH
+@status_UNKNOWN:
+    lda #'?'
+    bra @update_status_end
+@status_ERROR:
+    lda #'E'
+    bra @update_status_end
+@status_DONE:
+    lda #'O'
+    bra @update_status_end
+@status_XFER_SIZEL:
+    lda #'1'
+    bra @update_status_end
+@status_XFER_SIZEH:
+    lda #'2'
+    bra @update_status_end
+@status_XFER:
+    lda #'X'
+@update_status_end:
+    sta status_char
+
 @print_status:
     lda #lcd::LINE4
     jsr lcd::set_position
-    Strf FMT_STATUS,status_str,trans_pages,trans_bytes,status
+    Strf "%x%x/%x%x|%x%x|%c",status_str,trans_bytes+1,trans_bytes,spi_p::recv_size+1,spi_p::recv_size,spi_p::buffer_size+1,spi_p::buffer_size,status_char
     PrintNC status_str
 @loop:
+    wai
     ; check if a byte has been transferred
-@check_byte:
+@check_received:
-    lda spi_p::bytes_written
+    lda spi_p::recv_bytes
     cmp trans_bytes
     beq @read_keypad
-@byte_written:
+@byte_received:
     sta trans_bytes
-@check_page:
+    lda spi_p::recv_bytes+1
-    lda spi_p::pages_written
+    sta trans_bytes+1
-    cmp trans_pages
+    jmp @update_status
-    beq @read_keypad
-@page_written:
-    sta trans_pages
-    bra @print_status
 @read_keypad:
     lda kp::_DEBUG_VAL
     beq @loop
@@ -57,24 +89,35 @@ status_str:  .res 17  ; 16 + null
     beq @spi_end
     cmp #'C'
     beq @spi_jump
-    bra @loop
+    cmp #'D'
+    beq @spi_jump2
+    jmp @update_status  ; any other key
 @spi_begin:
-    lda #'@'
+    lda #<CODE_START
-    sta status
+    sta ARG0
-    jsr spi_p::begin
+    lda #>CODE_START
+    sta ARG1
+    lda #<__SPI_SIZE__
+    sta ARG2
+    lda #>__SPI_SIZE__
+    sta ARG3
+    jsr spi_p::begin_read
     jmp @print_menu
 @spi_end:
-    lda #'X'
+    jsr spi_p::end_read
-    sta status
-    jsr spi_p::end
     jmp @print_menu
 @spi_jump:
-    jsr spi_p::end
+    jsr spi_p::end_read
     jsr lcd::clear
-    Print START
+    Print "---START  SPI---"
-    jmp spi_p::CODE_START
+    jmp CODE_START
+@spi_jump2:
+    jsr spi_p::end_read
+    jsr lcd::clear
+    Printf "  >>> %x%x >>>  ", spi_p::buffer_ptr+1, spi_p::buffer_ptr
+    jmp (spi_p::buffer_ptr)
 @return_home:
-    jsr spi_p::end
+    jsr spi_p::end_read
     jmp home
 .endproc
 
@@ -84,6 +127,5 @@ MENU:
     .byte   "B> Stop Transfer"
     .asciiz "C> Jump  Home <*"
     ; .asciiz "0b0p   Status: X"
-FMT_STATUS: .asciiz "%x%xb  Status:%x"
 BEGIN:      .asciiz "---BEGIN  SPI---"
 START:      .asciiz "---START  SPI---"

programs/viu.s65

@@ -0,0 +1,54 @@
+;;********************************************************************************
+;; @file
+;; @brief VIU - VI Unimproved
+;;********************************************************************************
+.include "lcd.h65"
+.include "ps2_keyboard_text_handler.h65"
+
+.import home:absolute
+
+.zeropage
+ptr:    .res 2
+.bss
+buffer: .res 256
+
+.code
+.proc init
+    stz ptr
+    stz ptr+1
+    stz buffer
+.endproc
+
+.proc insert_mode
+    jsr lcd::clear
+    jsr kb::init
+loop:
+    lda kb::char
+    ldx ptr
+    beq @no_char
+    stz kb::char
+    jsr lcd::print_char
+    bra loop
+@no_char:
+    lda kb::keycode
+    beq loop
+
+    cmp #kb::K::ESCAPE
+    beq k_esacpe
+    cmp #kb::K::PRINT
+    beq clear_display
+    cmp #kb::K::BACKSPACE
+    beq k_backspace
+    bra loop
+k_esacpe:
+    jmp home
+clear_display:
+    jsr lcd::clear
+    bra loop
+k_backspace:
+    lcd_DecrementCursor
+    lda #' '
+    jsr lcd::print_char
+    lcd_DecrementCursor
+    bra loop
+.endproc

readme.md

@@ -1,16 +1,22 @@
 # 8-bit Breadboard Computer with W65C02S Processor
-This repo contains the assembly code for my [6502-project](https://quintern.xyz/de/6502.html).
+This repo contains the assembly code for my [6502-project](https://quintern.xyz/de/posts/2021_6502).
 
 The assembler used for this project is the excellent [ca65](https://github.com/cc65/cc65).
 After assembling it, the binary is loaded onto the  EEPROM using [my *eeprom.py* script](https://git.quintern.xyz/MatthiasQuintern/AT28C256-rpi-util) on a Raspberry Pi 4B.
 
 ## Operating System
-... is probably a far stretch, since it is just the programs I wrote pieced together. My "os" consists of these functionalities:
+... is probably a far stretch, since it is just the programs I wrote pieced together. My "OS" consists of these functionalities:
-- Main Menu:
+- Supported Hardware:
-    - Printer: Prints the characters you press on the keypad to the lcd.
+    - 4x4 Matrix Keypad
-    - Temperature: Shows the temperature using a dht sensor. *Work in progress, this does not work yet*
+    - 4x16 Characters LCD Display
-    - Text 1: Show a 4x16 character text (defined at compile time)
+    - PS/2 Keyboard
-    - Text 2: Show a 4x16 character text (defined at compile time)
+    - SPI Connection to an Arduino
-- Ringbuffer for pressed keys.
+- Software
+    - Keyboard and keypad printer: Prints the characters you press on to the lcd
+    <!-- - Temperature: Shows the temperature using a dht sensor. *Work in progress, this does not work yet* -->
+    - (Stylishly) print formated strings to the LCD
+    - Sleep
+    - Send various commands to the keyboard
+    - Ringbuffer
 
 > It's not much, but it's honest work.

spicode.s65

@@ -1,227 +1,109 @@
+;;********************************************************************************
+;; @file
+;; @details
+;;  This code is loaded to the computer via a SPI interface
+;;  Currently, it must be loaded to $5000, where the main loop will begin
+;;********************************************************************************
+
 .include "system.h65"
 .include "string.h65"
 .include "lcd.h65"
 .include "math.h65"
 .include "keypad.h65"
+.include "ps2_keyboard_text_handler.h65"
 .include "chars.h65"
+.include "parity.h65"
+.include "sleep.h65"
 .import homeloop:absolute
 .import home:absolute
+.import ps2_keyboard_util:absolute
+.import ps2_keyboard_printer:absolute
 
 .segment "SPI"
 .export CODE_START
 
 .import memcopy
 
-.scope kb
-KB_IO = IO1
-.endscope
 
 
 CODE_START:
 .assert * = $5000, error, "SPI Code not at $5000"
     jsr lcd::clear
+    DEBUG_LED_OFF 0
+    DEBUG_LED_OFF 1
+    DEBUG_LED_OFF 2
+
+    stz kp::_DEBUG_VAL
     lda #'$'
     jsr lcd::print_char
-
-    ; stz kp::_DEBUG_VAL
-; @loop:
-    ; lda kp::_DEBUG_VAL
-    ; beq @loop
-    ; stz kp::_DEBUG_VAL
-    ; cmp #'*'
-    ; jeq homeloop
-    ; jsr lcd::print_char
-    ; bra @loop
-
-    lda #<kb_irq1
-    sta ARG0
-    lda #>kb_irq1
-    sta ARG1
-    lda #<$3000
-    sta ARG2
-    lda #>$3000
-    sta ARG3
-    ldy #20
-    jsr memcopy
-
-    lda #<kb_irq2
-    sta ARG0
-    lda #>kb_irq2
-    sta ARG1
-    lda #<$3100
-    sta ARG2
-    lda #>$3100
-    sta ARG3
-    ldy #20
-    jsr memcopy
-
-    lda #'?'
-    jsr lcd::print_char
-
-    ; PrintNC $3000
-
-    jsr kbinit
-
-    lda #'%'
-    jsr lcd::print_char
-
-    stz kp::_DEBUG_VAL
-    ldy #0
-
 @loop:
+    wai
+@read_keypad:
     lda kp::_DEBUG_VAL
-    beq @loop
+    jeq @loop
-    stz kp::_DEBUG_VAL
+
     cmp #'*'
     jeq homeloop
+    cmp #'0'
+    beq @l0
     cmp #'1'
     beq @l1
     cmp #'2'
     beq @l2
     cmp #'3'
     beq @l3
+    cmp #'4'
+    beq @l4
+    cmp #'5'
+    beq @l5
+    cmp #'6'
+    beq @l6
+    cmp #'7'
+    beq @l7
+    cmp #'8'
+    beq @l8
+    cmp #'9'
+    beq @l9
+    cmp #'#'
+    beq @lhash
     cmp #'A'
     beq @lA
     cmp #'B'
     beq @lB
     cmp #'C'
     beq @lC
+    cmp #'D'
+    beq @lD
     jsr lcd::print_char
-    bra @loop
+    jmp @loop
+@l0:
+    jmp ps2_keyboard_util
 @l1:
-    ; jsr irq_on_shift_reg
+    jmp ps2_keyboard_printer
-    jsr $3000
-    lda #'*'
-    jsr lcd::print_char
-    bra @loop
 @l2:
-    ; jsr irq_on_timer
+    lcd_SetCursorPos $26
-    jsr $3100
+    lda #'6'
-    lda #'#'
+    jsr lcd::print_char
+    lcd_IncrementCursor
+    lda #'8'
     jsr lcd::print_char
-    bra @loop
 @l3:
-    lda $3000,y
+@l4:
-    jsr lcd::print_char
+@l5:
-    iny
+@l6:
-    bra @loop
+@l7:
+@l8:
+@l9:
+@lhash:
 @lA:
-    lda kb::KB_IO + IO::SR
-    jsr lcd::print_char
-    bra @loop
 @lB:
-    Strf fmt_str, out_str, keycode
-    Print out_str
-    bra @loop
 @lC:
-    jsr lcd::clear
+@lD:
-    bra @loop
+    jmp @loop
 
 
-kbinit:
-    lda #'['
-    jsr lcd::print_char
-    ; - use the shift register interrupts to read the first 8 bits
-    ;   set shift register to shift in under external clock on CB1
-    ; - configure timer for timing the read of the last 3 bits
-    ;   timer 2 one shot mode is sufficient, leaves T1 available
-    lda #(IO::ACR::SR_SIN_PHIE | IO::ACR::T2_IRQ_LOAD)
-    tsb kb::KB_IO + IO::ACR
-    ; the 3 last bits take about 230us, at @1MHz => wait 230 cycles and then the shift register
-    lda #230
-    sta kb::KB_IO + IO::T2CL
-    stz key_read
-    stz key_read+1
-
-    ; enable SR interrupts
-    lda #(IO::IRQ::IRQ | IO::IRQ::SR)
-    sta kb::KB_IO + IO::IER
-    ; load SR to reset
-    lda kb::KB_IO + IO::SR
-    lda #']'
-    jsr lcd::print_char
-    rts
 
 
-;; @details
-;;  IO::SR has to be read before the next bit is shifted in, which happens ~75us after the irq
-;;  at 1MHz, handlings this interrupt takes about 50us (without any additional debug code), so it should work
-irq_on_shift_reg:
-    ; lda #'{'
-    ; jsr lcd::print_char
-    lda kb::KB_IO + IO::SR
-    sta key_read
-    stz kb::KB_IO + IO::SR
-
-    ; disable SR interrupts
-    lda #IO::IRQ::SR
-    sta kb::KB_IO + IO::IER
-    ; enable timer interrupts
-    lda #(IO::IRQ::IRQ | IO::IRQ::T2)
-    sta kb::KB_IO + IO::IER
-    ; start timer
-    lda #1
-    sta kb::KB_IO + IO::T2CH
-    ; lda #'}'
-    ; jsr lcd::print_char
-    rts
-    
-
-irq_on_timer:
-    ; lda #'<'
-    ; jsr lcd::print_char
-    lda kb::KB_IO + IO::SR
-    sta key_read + 1
-
-    lda kb::KB_IO + IO::T2CL  ; clear interrupt flag
-
-    ; disable timer interrupts
-    lda #(IO::IRQ::T2)
-    sta kb::KB_IO + IO::IER
-    ; enable shift register interrupts
-    lda #(IO::IRQ::IRQ | IO::IRQ::SR)
-    sta kb::KB_IO + IO::IER
-    ; reset SR
-    stz kb::KB_IO + IO::SR
-
-    ; lda #'|'
-    ; rotate bit 2 (last bit of keycode) into the carry
-    ror
-    ror
-    ror
-    lda key_read  ; not affecting carry
-    rol  ; rotate carry into byte, rotate startbit into carry
-    ; TODO byte is inverted, maybe consider wasting 256 bytes for a bit reverse lookup table?
-    sta keycode
-
-    Strf fmt_str2, out_str, keycode, key_read, key_read+1
-    PrintNC out_str
-
-    stz key_read
-    stz key_read+1
-
-    rts
-
-key_read: .res 2
-keycode:  .res 1
-kb_irq1:
-    ; lda #'!'
-    ; jsr lcd::print_char
-    jsr irq_on_shift_reg
-    ; lda #':'
-    ; jsr lcd::print_char
-    rts
-.byte '='
-kb_irq2:
-    ; lda #'?'
-    ; jsr lcd::print_char
-    jsr irq_on_timer
-    ; lda #';'
-    ; jsr lcd::print_char
-    rts
 .byte '@'
-
+out_str:        .res 40
-out_str: .res 40
+FMT_INIT_FAIL: .asciiz "KB init failed:  %x%x > %x%x%x"
-fmt_str: .asciiz "kc%x;"
-fmt_str2: .asciiz "kc%x-%x-%x;     "
-

system/buffer.h65

@@ -1,16 +1,21 @@
-;********************************************************************************
+;;********************************************************************************
-; @module ringbuffer
+;; @file
-; @type utility
+;; @brief Ringbuffer
-; @details
+;; @details
-;   Size of the ringbuffer is RBUF_MEM_END - RBUF_MEM_START - 2, since two bytes
+;;   Size of the ringbuffer is RBUF_MEM_END - RBUF_MEM_START - 2, since two bytes
-;   are used by the read and write pointer
+;;   are used by the read and write pointer
-;   The RBUF_NAME variable must be defined, the functions will then be exported
+;;   The `RBUF_NAME` variable must be defined, the functions will then be exported
-;   as rb_<RBUF_NAME>_<function> where <function> = init, read or write
+;;   as `rb_<RBUF_NAME>_<function>` where `<function>` = `init`, `read` or `write`
-; @requires
+;;   
-;   RBUF_MEM_START: First address of ringbuffer memory space
+;; @note 
-;   RBUF_MEM_END: Last address of ringbuffer memory space
+;;  Doxygen can not generate proper documentation for this module, because
-;   RBUF_NAME: Name of the ringbuffer
+;;  all names are defined using macros
-;********************************************************************************
+;; @requires
+;;   RBUF_MEM_START: First address of ringbuffer memory space
+;;   RBUF_MEM_END: Last address of ringbuffer memory space
+;;   RBUF_NAME: Name of the ringbuffer
+;; @ingroup libs
+;;********************************************************************************
 .code
 
 .ifndef RBUF_MEM_START
@@ -36,9 +41,9 @@ RB_LENGTH   = RBUF_MEM_END - RBUF_MEM_START - 2
 .endif
 
 
-;********************************************************************************
+;;********************************************************************************
-; @function Initialize the buffer
+;; @function Initialize the buffer
-;********************************************************************************
+;;********************************************************************************
 .ident(.concat(_RBUF_NAME, "_init")):
 .scope
     stz RB_WRITE
@@ -46,13 +51,13 @@ RB_LENGTH   = RBUF_MEM_END - RBUF_MEM_START - 2
     rts
 .endscope
 
-;********************************************************************************
+;;********************************************************************************
-; @function Read a value from the buffer
+;; @function Read a value from the buffer
-; @details
+;; @details
-;   If there is no value to be read, the Pz will be set
+;;   If there is no value to be read, the Pz will be set
-; @returns A: value
+;; @returns A: value
-; @modifies: A, X
+;; @modifies A, X
-;********************************************************************************
+;;********************************************************************************
 .ident(.concat(_RBUF_NAME, "_read")):
 .scope
     ldx RB_READ
@@ -72,11 +77,11 @@ RB_LENGTH   = RBUF_MEM_END - RBUF_MEM_START - 2
     rts
 .endscope
 
-;********************************************************************************
+;;********************************************************************************
-; @function Write a value to the buffer
+;; @function Write a value to the buffer
-; @param A: value to store
+;; @param A: value to store
-; @modifies: X
+;; @modifies X
-;********************************************************************************
+;;********************************************************************************
 .ident(.concat(_RBUF_NAME, "_write")):
 .scope
     ; lda kp_VALUES, x  ; load the char in a

system/io_W65C22.h65

@@ -1,35 +1,51 @@
-;********************************************************************************
+;;********************************************************************************
-; @module IO-W65C22
+;; @file
-; @type utility
+;; @brief VIA W65C22 header
-; @device Western Design - W65C22N Versatile Interface Adapter
+;; @ingroup system
-; @details
+;; @details
-;********************************************************************************
+;; @device Western Design - W65C22N Versatile Interface Adapter
+;;********************************************************************************
 
 .ifndef INCLUDE_IOW65C22
 INCLUDE_IOW65C22 = 1
 
+;;********************************************************************************
+;; @brief Versatile Interface Adapter (VIA) W65C22
+;; @ingroup system
+;; @device Western Design - W65C22N Versatile Interface Adapter
+;; @todo rename to VIA
+;; @warning @anchor via_hardware_bug
+;;  The 6522 and 65C22 have a hardware bug, where a bit is not read in when the 
+;;  external shift register clock transitions close to @f$ \phi_2 @f$.
+;;  To resolve this, you should use a @f$ \phi_2 @f$ controlled flip flop to ensure
+;;  the external clock transitions after the system clock.
+;;********************************************************************************
 .scope IO
 
 ; not using a struct for this since the syntax for access would be the same, 
 ; ie label+IO::RA
+;;********************************************************************************
+;; @brief VIA register offsets from the base address 
+;; @details
+;;  Use like this: `VIA_ADDRESS + IO::RB`
+;;********************************************************************************
 .enum
-; IO-CHIPS OFFSETS FOR PINS FROM BASE ADDRESS
+    RB   = $0  ;;< Register B (ORB/IRB)
-    RB   = $0  ; Register B (ORB/IRB)
+    RA   = $1  ;;< Register A (ORA/IRA)
-    RA   = $1  ; Register A (ORA/IRA)
+    DDRB = $2  ;;< Data Direction Register B
-    DDRB = $2  ; Data Direction Register B
+    DDRA = $3  ;;< Data Direction Register A
-    DDRA = $3  ; Data Direction Register A
+    T1CL = $4  ;;< Timer 1 Counter Low/High
-    T1CL = $4  ; Timer 1 Counter Low/High
     T1CH = $5
-    T1LL = $6  ; Timer 1 Latch Low/High
+    T1LL = $6  ;;< Timer 1 Latch Low/High
     T1LH = $7
-    T2CL = $8  ; Timer 2 Counter Low/High
+    T2CL = $8  ;;< Timer 2 Counter Low/High
     T2CH = $9
-    SR   = $a  ; Shift Register
+    SR   = $a  ;;< Shift Register
-    ACR  = $b  ; Auxiliary Control Register
+    ACR  = $b  ;;< Auxiliary Control Register
-    PCR  = $c  ; Peripheral Control Register
+    PCR  = $c  ;;< Peripheral Control Register
-    IFR  = $d  ; Interrupt Flag Register
+    IFR  = $d  ;;< Interrupt Flag Register
-    IER  = $e  ; Interrupt Enable Register
+    IER  = $e  ;;< Interrupt Enable Register
-    RANH = $f  ; RA without handshake
+    RANH = $f  ;;< RA without handshake
 .endenum
 
 .enum ACR_MASK  ; ACR Masks
@@ -40,27 +56,32 @@ INCLUDE_IOW65C22 = 1
     T1          = %11000000
 .endenum
 
-.enum ACR  ; ACR Settings
+;;********************************************************************************
+;; @brief Settings for Auxiliary Control Register
+;; @details
+;;  `OR` the values with the appropriate IO::ACR_MASK to not target only specific settings
+;;********************************************************************************
+.enum ACR
     ; SR Modes
-    SR_DISABLE       = %00000000  ; Disabled
+    SR_DISABLE       = %00000000  ;;< Disabled
-    SR_SIN_T2        = %00000100  ; Shift in under control of T2
+    SR_SIN_T2        = %00000100  ;;< Shift in under control of T2
-    SR_SIN_PHI2      = %00001000  ; Shift in under control of PHI2
+    SR_SIN_PHI2      = %00001000  ;;< Shift in under control of PHI2
-    SR_SIN_PHIE      = %00001100  ; Shift in under control of external clock
+    SR_SIN_PHIE      = %00001100  ;;< Shift in under control of external clock
-    SR_SOUT_FREE_T2  = %00010000  ; Shift out free running at T2 rate
+    SR_SOUT_FREE_T2  = %00010000  ;;< Shift out free running at T2 rate
-    SR_SOUT_T2       = %00010100  ; Shift out under control of T2
+    SR_SOUT_T2       = %00010100  ;;< Shift out under control of T2
-    SR_SOUT_PHI2     = %00011000  ; Shift out under control of PHI2
+    SR_SOUT_PHI2     = %00011000  ;;< Shift out under control of PHI2
-    SR_SOUT_PHIE     = %00011100  ; Shift out under control of external clock
+    SR_SOUT_PHIE     = %00011100  ;;< Shift out under control of external clock
     ; T1 Modes
-    T1_IRQ_LOAD      = %00000000  ; Timed interrupt each time T1 is loaded
+    T1_IRQ_LOAD      = %00000000  ;;< Timed interrupt each time T1 is loaded
-    T1_IRQ_CONT      = %01000000  ; Continuous interrupts
+    T1_IRQ_CONT      = %01000000  ;;< Continuous interrupts
-    T1_IRQ_LOAD_PB7  = %10000000  ; Timed interrupt each time T1 is loaded - PB7 One Shot output
+    T1_IRQ_LOAD_PB7  = %10000000  ;;< Timed interrupt each time T1 is loaded - PB7 One Shot output
-    T1_IRQ_CONT_PB7  = %11000000  ; Continuous interrupts - PB7 Square wave output
+    T1_IRQ_CONT_PB7  = %11000000  ;;< Continuous interrupts - PB7 Square wave output
     ; T2 Modes
-    T2_IRQ_LOAD      = %00000000  ; Timed interrupt each time T2 is loaded
+    T2_IRQ_LOAD      = %00000000  ;;< Timed interrupt each time T2 is loaded
-    T2_COUNT_PB6     = %00100000  ; Count down with pulsen on PB6
+    T2_COUNT_PB6     = %00100000  ;;< Count down with pulsen on PB6
     ; Latch
-    LATCH_DISABLE    = %00000000
+    LATCH_DISABLE    = %00000000  ;;< `OR` this with IO::ACR_MASK::PA or IO::ACR_MASK::PB
-    LATCH_ENBLE      = %00000000
+    LATCH_ENBLE      = %00000011  ;;< `OR` this with IO::ACR_MASK::PA or IO::ACR_MASK::PB
 .endenum
 
 .enum PCR_MASK  ; PCR Masks
@@ -70,34 +91,42 @@ INCLUDE_IOW65C22 = 1
     CB2         = %11100000  ; 
 .endenum
 
+;;********************************************************************************
+;; @brief Settings for Peripheral Control Register
+;; @details
+;;  `OR` the values with the appropriate IO::PCR_MASK to not target only specific settings
+;;********************************************************************************
 .enum PCR
     ; CA1 Modes
-    CA1_IN_AE        = %00000000   ; Input-negative active edge
+    CA1_IN_AE        = %00000000    ;;< Input-negative active edge
-    CA1_IP_AE        = %00000001   ; Input-positive active edge
+    CA1_IP_AE        = %00000001    ;;< Input-positive active edge
     ; CA2 Modes
-    CA2_IN_AE        = %00000000  ; Input-negative active edge
+    CA2_IN_AE        = %00000000    ;;< Input-negative active edge
-    CA2_IN_AE_IRQ_IND= %00000010  ; Independent interrupt input-negative edge
+    CA2_IN_AE_IRQ_IND= %00000010    ;;< Independent interrupt input-negative edge
-    CA2_IP_AE        = %00000100  ; Input-positive active edge
+    CA2_IP_AE        = %00000100    ;;< Input-positive active edge
-    CA2_IP_AE_IRQ_IND= %00000110  ; Independent interrupt input-positive edge
+    CA2_IP_AE_IRQ_IND= %00000110    ;;< Independent interrupt input-positive edge
-    CA2_IN_HANDSHAKE = %00001000  ; Handshake output
+    CA2_OUT_HANDSHAKE= %00001000    ;;< Handshake output
-    CA2_IN_PULSE_OUT = %00001010  ; Pulse output
+    CA2_OUT_PULSE    = %00001010    ;;< Pulse output
-    CA2_IN_LOW_OUT   = %00001100  ; Low output
+    CA2_OUT_LOW      = %00001100    ;;< Low output
-    CA2_IN_HIGH_OUT  = %00001110  ; High output
+    CA2_OUT_HIGH     = %00001110    ;;< High output
     ; CB1 Modes
-    CB1_IN_AE        = %00000000   ; Input-negative active edge
+    CB1_IN_AE        = %00000000    ;;< Input-negative active edge
-    CB1_IP_AE        = %00010000   ; Input-positive active edge
+    CB1_IP_AE        = %00010000    ;;< Input-positive active edge
     ; CB2 Modes
-    CB2_IN_AE        = %00000000  ; Input-negative active edge
+    CB2_IN_AE        = %00000000    ;;< Input-negative active edge
-    CB2_IN_AE_IRQ_IND= %00100000  ; Independent interrupt input-negative edge
+    CB2_IN_AE_IRQ_IND= %00100000    ;;< Independent interrupt input-negative edge
-    CB2_IP_AE        = %01000000  ; Input-positive active edge
+    CB2_IP_AE        = %01000000    ;;< Input-positive active edge
-    CB2_IP_AE_IRQ_IND= %01100000  ; Independent interrupt input-positive edge
+    CB2_IP_AE_IRQ_IND= %01100000    ;;< Independent interrupt input-positive edge
-    CB2_IN_HANDSHAKE = %10000000  ; Handshake output
+    CB2_OUT_HANDSHAKE= %10000000    ;;< Handshake output
-    CB2_IN_PULSE_OUT = %10100000  ; Pulse output
+    CB2_OUT_PULSE    = %10100000    ;;< Pulse output
-    CB2_IN_LOW_OUT   = %11000000  ; Low output
+    CB2_OUT_LOW      = %11000000    ;;< Low output
-    CB2_IN_HIGH_OUT  = %11100000  ; High output
+    CB2_OUT_HIGH     = %11100000    ;;< High output
 .endenum
 
-; IFR/IER bits
+
+;;********************************************************************************
+;; @brief Interrupt Flag/Enable Register bits
+;;********************************************************************************
 .enum IRQ
     CA2  = %00000001
     CA1  = %00000010
@@ -109,5 +138,24 @@ INCLUDE_IOW65C22 = 1
     IRQ  = %10000000
 .endenum
 
+;;********************************************************************************
+;; @macro Enable an interrupt source
+;; @modifies A
+;; @param flag: A flag of the interrupt flag register (IO::IRQ)
+;;********************************************************************************
+.macro IO_EnableIRQ ioaddr, flag
+    lda #(IO::IRQ::IRQ | flag)
+    sta ioaddr + IO::IER
+.endmacro
+;;********************************************************************************
+;; @macro Disable an interrupt source
+;; @modifies A
+;; @param flag: A flag of the interrupt flag register (IO::IRQ)
+;;********************************************************************************
+.macro IO_DisableIRQ ioaddr, flag
+    lda #flag
+    sta ioaddr + IO::IER
+.endmacro
+
 .endscope ; IO
 .endif  ; guard

system/irq_handler.h65

@@ -1,7 +1,8 @@
-;********************************************************************************
+;;********************************************************************************
-; @module irq_handler
+;; @file
-; @type system
+;; @brief WIP irq handler with jump tables and stuff
-;********************************************************************************
+;; @ingroup system
+;;********************************************************************************
 .ifndef INCLUDE_IRQ_HANDLER
 INCLUDE_IRQ_HANDLER = 1
 

system/keypad.h65

@@ -1,17 +1,20 @@
-;********************************************************************************
+;;********************************************************************************
-; @module keypad4x4
+;; @file
-; @type driver
+;; @brief 4x4 Matrix Keypad driver
-; @device 4x4 Matrix Keypad
+;; @details
-; @details
+;;   The LCD must be connected to a W65C22N Interface Chip:
-;   The LCD must be connected to a W65C22N Interface Chip:
+;;     - IO.RA0-7  -> 
-;     - IO.RA0-7  -> 
+;; @requires KP_IO: Base Address of IO Chip
-; @requires KP_IO: Base Address of IO Chip
+;; @depends IO-W65C22N 
-; @depends IO-W65C22N 
+;; @ingroup drivers
-;********************************************************************************
+;;********************************************************************************
 .ifndef INCLUDE_KEYPAD
 INCLUDE_KEYPAD = 1
 .include "system.h65"
 
+;;********************************************************************************
+;; @brief 4x4 Matrix Keypad
+;;********************************************************************************
 .scope kp
 KP_IO = IO2
 ; .import KP_IO

system/lcd.h65

@@ -1,26 +1,63 @@
-;********************************************************************************
+;;********************************************************************************
-; @module LCD-W164B
+;; @file
-; @type driver
+;; @brief LCD-W164B driver
-; @device ELECTRONIC ASSEMBLY - W164B-NLW
+;; @ingroup drivers
-; @details
+;; @device ELECTRONIC ASSEMBLY - W164B-NLW
-;   The LCD must be connected to a W65C22N Interface Chip:
+;; @details
-;     - IO.RB0-7  -> LCD.D0-7 data lines
+;;   The LCD must be connected to a W65C22N Interface Chip:
-;     - IO.RA5    -> LCD.RS   register select
+;;     - IO.RB0-7  -> LCD.D0-7 data lines
-;     - IO.RA6    -> LCD.R/W  read/write
+;;     - IO.RA5    -> LCD.RS   register select
-;     - IO.RA7    -> LCD.E    enable
+;;     - IO.RA6    -> LCD.R/W  read/write
-;   
+;;     - IO.RA7    -> LCD.E    enable
-; @requires IO: Base Address of IO Chip
+;; @requires IO: Base Address of IO Chip
-; @depends IO-W65C22N
+;; @depends IO-W65C22N
-;********************************************************************************
+;;********************************************************************************
 .ifndef INCLUDE_LCD
 INCLUDE_LCD = 1
 
 .include "system/system.h65"
 
+;;********************************************************************************
+;; @brief LCD character display
+;; @ingroup drivers
+;;********************************************************************************
 .scope lcd
 LCD_IO = IO1
 Import lcd,init,clear,print,print_char,set_position,set_custom_char
-Import lcd,_cmd,_wait_nbusy,_write_ram,_read_ram
+Import lcd,_cmd,_wait_nbusy,_write_ram,_read_ram,_set_dd_ram_addr_from_charcount
+Import lcd,_charcount
+
+; PIN MASKS
+E       = %10000000
+RW      = %01000000
+RS      = %00100000
+
+RA_MASK = %11100000
+
+;;********************************************************************************
+;; LCD Instructions 
+;; @details See LCD-W164B datasheet for a complete list
+;;********************************************************************************
+.enum CMD
+    CLEAR           = %00000001  ;; clear display
+    ENTRY_MODE      = %00000110  ;; auto-shift cursor
+    DISPLAY_ON      = %00001111  ;; everything on, with blinking cursor
+    SHIFT_CUR_LEFT  = %00101000  ;; shift the cursor to the left
+    SHIFT_DIS_LEFT  = %00111000  ;; shift the display to the left
+    SHIFT_DIS_RIGHT = %00110000  ;; shift the display to the right
+    SHIFT_CUR_RIGHT = %00100000  ;; shift the cursor to the right
+    FUNCTION_SET    = %00111000  ;; 8-bit, 4 lines, 5x7 font
+    SET_CG_ADDRESS  = %01000000  ;; or this with the address
+    SET_ADDRESS     = %10000000  ;; or this with the address
+.endenum
+
+; LCD Constants
+LINE1      = $00
+LINE2      = $40
+LINE3      = $10
+LINE4      = $50
+
+.endscope
 
 ;;********************************************************************************
 ;; @macro Clear the screen and print a null-terminated string
@@ -73,29 +110,55 @@ Import lcd,_cmd,_wait_nbusy,_write_ram,_read_ram
     jsr lcd::print
 .endmacro
 
-; PIN MASKS
-E       = %10000000
-RW      = %01000000
-RS      = %00100000
 
-RA_MASK = %11100000
+;;********************************************************************************
+;; @macro Set the cursor to the n-th position
+;; @param n: Position [0,$40) or a register
+;;********************************************************************************
+.macro lcd_SetCursorPos n
+    .if .match (n, a)
+    .elseif .match (n, x)
+        txa
+    .elseif .match (n, y)
+        tya
+    .else
+        lda #n
+    .endif
+    sta lcd::_charcount
+    jsr lcd::_set_dd_ram_addr_from_charcount
+.endmacro
 
-; LCD Instructions (see datasheet for more)
+;;********************************************************************************
-CMD_CLEAR           = %00000001  ; clear display
+;; @macro Move the cursor to the right
-CMD_ENTRY_MODE      = %00000110  ; auto-shift cursor
+;; @param n: Number of characters to move n. Defaults to 1 if not provided
-CMD_DISPLAY_ON      = %00001111  ; everything on, with blinking cursor
+;;********************************************************************************
-CMD_SHIFT_CUR_LEFT  = %00101000  ; shift the display to the left
+.macro lcd_IncrementCursor n
-CMD_SHIFT_DIS_LEFT  = %00111000  ; shift the display to the left
+    .ifblank n
-CMD_SHIFT_DIS_RIGHT = %00110000  ; shift the display to the right
+        inc lcd::_charcount
-CMD_SHIFT_CUR_RIGHT = %00100000  ; shift the display to the right
+    .elseif n = 1
-CMD_FUNCTION_SET    = %00111000  ; 8-bit, 4 lines, 5x7 font
+        inc lcd::_charcount
-CMD_SET_CG_ADDRESS  = %01000000  ; or with the address
+    .else
-CMD_SET_ADDRESS     = %10000000  ; or with the address
+        lda lcd::_charcount
-; LCD Constants
+        add #n
-LINE1      = $00
+        sta lcd::_charcount
-LINE2      = $40
+    .endif
-LINE3      = $10
+    jsr lcd::_set_dd_ram_addr_from_charcount
-LINE4      = $50
+.endmacro
 
-.endscope
+;;********************************************************************************
+;; @macro Move the cursor to the left
+;; @param n: Number of characters to move n. Defaults to 1 if not provided
+;;********************************************************************************
+.macro lcd_DecrementCursor n
+    .ifblank n
+        dec lcd::_charcount
+    .elseif n = 1
+        dec lcd::_charcount
+    .else
+        lda lcd::_charcount
+        sub #n
+        sta lcd::_charcount
+    .endif
+    jsr lcd::_set_dd_ram_addr_from_charcount
+.endmacro
 .endif  ; guard

system/lcd.s65

@@ -5,12 +5,13 @@
 .endif
 
 Export lcd,init,clear,print,print_char,set_position,set_custom_char
-Export lcd,_cmd,_wait_nbusy,_write_ram,_read_ram
+Export lcd,_cmd,_wait_nbusy,_write_ram,_read_ram,_set_dd_ram_addr_from_charcount
+Export lcd,_charcount
 ; RAM VARIABLES
 .bss
-charcount:  .res 1
+_charcount:  .res 1
 
-; TODO when clockspeeds are more than 1MHz, _cmd, _write_ram and _read_ram might need to be adjusted
+; @TODO when clockspeeds are more than 1MHz, _cmd, _write_ram and _read_ram might need to be adjusted
 .code
 ;;********************************************************************************
 ;; @function Initialize the lcd module
@@ -22,21 +23,21 @@ charcount:  .res 1
     lda #$ff                        ; RB 0-7 output
     sta lcd::LCD_IO+IO::DDRB
 
-    MaskedWrite lcd::LCD_IO+IO::DDRA, (lcd::RS | lcd::RW | lcd::E), lcd::RA_MASK
+    lda lcd::LCD_IO+IO::DDRA
-    ; lda #(lcd::RS | lcd::RW | lcd::E)   ; RA 5-7 output
+    ora #(lcd::RS | lcd::RW | lcd::E)
-    ; sta lcd::LCD_IO+IO::DDRA
+    sta lcd::LCD_IO+IO::DDRA
 
     ; init lcd
-    lda #lcd::CMD_FUNCTION_SET  
+    lda #lcd::CMD::FUNCTION_SET  
     jsr _cmd
-    lda #lcd::CMD_DISPLAY_ON
+    lda #lcd::CMD::DISPLAY_ON
     jsr _cmd
-    lda #lcd::CMD_CLEAR
+    lda #lcd::CMD::CLEAR
     jsr _cmd
-    lda #lcd::CMD_ENTRY_MODE
+    lda #lcd::CMD::ENTRY_MODE
     jsr _cmd
 
-    stz charcount
+    stz _charcount
     rts
 .endproc
 
@@ -44,7 +45,7 @@ charcount:  .res 1
 ;;********************************************************************************
 ;; @function Set the cursor to a position
 ;; @param A: cursor position: `(lcd::LINEX + offset)`, where offset € [$0, $f]
-;; @details:
+;; @details
 ;;  If the position is too large, it will be set to char 4 in line 2
 ;; @returns A: the cursor position
 ;;********************************************************************************
@@ -61,37 +62,37 @@ charcount:  .res 1
     cmp #$10
     bge @line3
     bra @set
-; @line1:  ; starts at $00, charcount at $00
+; @line1:  ; starts at $00, _charcount at $00
-@line2:  ; starts at $40, charcount at $10
+@line2:  ; starts at $40, _charcount at $10
     sbc #$30  ; carry is already set
     bra @set
-@line3:  ; starts at $10, charcount at $20
+@line3:  ; starts at $10, _charcount at $20
     add #$10
     bra @set
-@line4:  ; starts at $50, charcount at $30
+@line4:  ; starts at $50, _charcount at $30
     sbc #$20
 @set:
-    sta charcount
+    sta _charcount
     pla
     pha
-    ora #lcd::CMD_SET_ADDRESS
+    ora #lcd::CMD::SET_ADDRESS
     jsr _cmd
-    ; and #(<~lcd::CMD_SET_ADDRESS)  ; return original argument
+    ; and #(<~lcd::CMD::SET_ADDRESS)  ; return original argument
     pla
     rts
 @invalid:
     pla  ; otherwise stack corruption
     lda #$13
-    sta charcount
+    sta _charcount
-    lda #(lcd::CMD_SET_ADDRESS | (lcd::LINE2 + 3))
+    lda #(lcd::CMD::SET_ADDRESS | (lcd::LINE2 + 3))
     jsr _cmd
     lda #(lcd::LINE2 + 3)
     rts
 .endproc
 
-;;********************************************************************************
+;********************************************************************************
-;; PRINTING TO LCD
+; PRINTING TO LCD
-;;********************************************************************************
+;********************************************************************************
 
 ;;********************************************************************************
 ;; @function Clear the display
@@ -99,8 +100,8 @@ charcount:  .res 1
 ;; @modifies A
 ;;********************************************************************************
 .proc clear
-    stz charcount
+    stz _charcount
-    lda #lcd::CMD_CLEAR
+    lda #lcd::CMD::CLEAR
     jsr _cmd
     rts
 .endproc
@@ -108,7 +109,7 @@ charcount:  .res 1
 ;;********************************************************************************
 ;; @function Print a null-terminated string
 ;; @param ARG0-1 Address of the string to print
-;; @modifies: A,Y
+;; @modifies A,Y
 ;; @returns Y: Length of the string
 ;;********************************************************************************
 .proc print
@@ -131,7 +132,7 @@ charcount:  .res 1
 .proc print_char
     pha
     jsr _write_ram
-    inc charcount
+    inc _charcount
     jsr _break_line
     pla ; put char back in a
 .endproc
@@ -142,7 +143,7 @@ charcount:  .res 1
 ;; @param A: The ASCII code: 0-7
 ;; @param ARG0-1: Start address of the 8 bytes describing the character
 ;; @returns: C: 0 => success, 1 => invalid argument
-;; @modifies: A,Y
+;; @modifies A,Y
 ;;********************************************************************************
 .proc set_custom_char
     cmp #8
@@ -150,7 +151,7 @@ charcount:  .res 1
     rol  ; address is bytes 3-5
     rol 
     rol
-    ora #lcd::CMD_SET_CG_ADDRESS
+    ora #lcd::CMD::SET_CG_ADDRESS
     jsr lcd::_cmd
     ldy #0
 @loop:
@@ -176,19 +177,24 @@ charcount:  .res 1
 .proc _wait_nbusy
     pha
     stz lcd::LCD_IO + IO::DDRB           ; set IO1-IO + IO::RB to input
-@lcd_wait_nbusy_loop:   ; read the busy flag
+    lda lcd::LCD_IO + IO::RA
-    ; TODO use update_with_mask
+    and #<~lcd::RA_MASK
-    lda #lcd::RW
+    ora #lcd::RW
     sta lcd::LCD_IO + IO::RA
-    lda #(lcd::RW | lcd::E)
+
+@lcd_wait_nbusy_loop:   ; read the busy flag
+    ; set E low, then high
+    lda lcd::LCD_IO + IO::RA
+    and #<~lcd::E
+    sta lcd::LCD_IO + IO::RA
+    ora #lcd::E
     sta lcd::LCD_IO + IO::RA
     
     lda lcd::LCD_IO + IO::RB
     bmi @lcd_wait_nbusy_loop   ; msb set
-    ; and #%10000000      ; and updates zero flag, if not set retry
-    ; bne @lcd_wait_nbusy_loop
     
-    lda #%00000000      ; TODO dont overwrite 0-4
+    lda lcd::LCD_IO + IO::RA
+    and #<~lcd::RA_MASK
     sta lcd::LCD_IO + IO::RA
     lda #%11111111   ; set IO1-IO + IO::RB to output
     sta lcd::LCD_IO + IO::DDRB
@@ -198,7 +204,7 @@ charcount:  .res 1
 
 
 ;;********************************************************************************
-;; @function Send a command to the lcd
+;; @function Send a @ref lcd::CMD "command" to the lcd
 ;; @param A: command
 ;; @modifies A
 ;;********************************************************************************
@@ -281,11 +287,54 @@ charcount:  .res 1
 
 
 ;;********************************************************************************
-;; @function Set the LCD DD-RAM Address so that text linebreaks after 16 chars
+;; @function Set the LCD DD-RAM Address from the character count
+;; @details
+;;  Sets the DD-RAM Address so that a line break occurs after 16 characters
+;;  If _charcount is more than $40, the position will be set to _charcount % $40
+;;********************************************************************************
+.proc _set_dd_ram_addr_from_charcount
+    cmp #$40  ; set to line1 when full
+    bcs @wrap_to_line1 ; a € [$40, $ff]
+    cmp #$10
+    bcc @line1  ; a € [$00, $0f]
+    cmp #$20
+    bcc @line2  ; a € [$10, $1f]
+    cmp #$30
+    bcc @line3  ; a € [$20, $2f]
+    ; bra @line4; a € [$30, $3f]
+@line4:
+    clc
+    adc #$20        ; _charcount $30-$3f -> $50 - $5f
+    bra @set_address
+@wrap_to_line1:
+    and #%00111111
+    ; now every _charcount is mapped between 0 and $3f
+    bra @set_address
+@line2:
+    adc #$30        ; _charcount $10-$1f -> $40 - $4f
+    bra @set_address
+@line3:
+    sec
+    sbc #$10        ; _charcount $20-$2f -> $10 - $1f
+    bra @set_address
+@line1:             ; _charcount $00-$1f -> $00 - $0f - nothing to do
+@set_address:
+    ora #lcd::CMD::SET_ADDRESS
+    jsr _cmd
+    rts
+.endproc
+
+;;********************************************************************************
+;; @function Set the LCD DD-RAM Address to te next line if the end of the line was reached
+;; @details
+;;  If the cursor is past the end of a line, the DD-RAM Address is set to the next line.
+;;  If _charcount is more than $40, the position will be set to line 1.
+;;  This function is intended to be used with to set the correct address when
+;;  auto-shift is enabled
 ;;********************************************************************************
 .proc _break_line
     ; check if checks are necessary
-    lda charcount
+    lda _charcount
     beq @line1
     bit #%10001111  ; ($10 | $20 | $30 | $40) = %01110000
     beq @check
@@ -302,20 +351,20 @@ charcount:  .res 1
     bge @line1 
     rts
 @line1:
-    stz charcount
+    stz _charcount
-    lda #(lcd::CMD_SET_ADDRESS | lcd::LINE1)
+    lda #(lcd::CMD::SET_ADDRESS | lcd::LINE1)
     jsr _cmd
     rts
 @line2:
-    lda #(lcd::CMD_SET_ADDRESS | lcd::LINE2)
+    lda #(lcd::CMD::SET_ADDRESS | lcd::LINE2)
     jsr _cmd
     rts
 @line3:
-    lda #(lcd::CMD_SET_ADDRESS | lcd::LINE3)
+    lda #(lcd::CMD::SET_ADDRESS | lcd::LINE3)
     jsr _cmd
     rts
 @line4:
-    lda #(lcd::CMD_SET_ADDRESS | lcd::LINE4)
+    lda #(lcd::CMD::SET_ADDRESS | lcd::LINE4)
     jsr _cmd
     rts
 .endproc

system/ps2_keyboard.h65

@@ -0,0 +1,219 @@
+;;********************************************************************************
+;; @file
+;; @brief PS/2 Keyboard driver 
+;; @ingroup drivers
+;; @details
+;;  Support for a PS2 Keyboard using the shift register of a 6522 VIA
+;;  @section reading Reading a scancode/command answer
+;;   Pressing a key causes 11 bits to be sent: 1 start - 8 scancode - 1 parity - 1 stop 
+;;   The VIA is set up to interrupt after 8 bits have been shifted into the shift register
+;;   from the external clock pulses of the keyboard (additional hardware required to 
+;;   address the hardware bug of the VIA, where bit get lost when the external clock 
+;;   transition happens during falling edge of PHI2). After reading the shift register,
+;;   the VIAs T2 timer is set to interrupt after the last 3 bits have been shifted in,
+;;   which takes about ~230ms.
+;;	 T2 is used because it leaves to more versatile T1 available for something else
+;; 
+;;  @section processing Processing a scancode
+;;	 The scancode may be processed by storing the address of a handler subroutine in
+;;	 `ps2kb::scancode_handler`. This handler can load the scancode byte from `ps2kb::scancode`.
+;;  
+;;  To use a different layout, change the enum K and the CHARS_NOMOD and CHARS_MODSHIFT
+;; @warning
+;;  The value with which the timer is loaded must depends on the clock frequency
+;;	of the keyboard and the computer
+;;********************************************************************************
+.ifndef INCLUDE_PS2_KEYBOARD
+INCLUDE_PS2_KEYBOARD = 1
+.include "system.h65"
+
+
+;;********************************************************************************
+;; @brief PS/2 Keyboard
+;;  This requires the data line to be hooked up to `CB2` and the clock to `CB1`.
+;;  The VIA will be set to shift in the data into the shift register under the external clock.
+;; @see @ref via_hardware_bug "VIA external clock bug"
+;; @include keyboard
+;; @ingroup drivers
+;;********************************************************************************
+.scope ps2kb
+Import ps2kb, init, begin_receive, scancode, status, scancode_handler
+Import ps2kb, _receive_irq_shift_reg_handler, _receive_irq_timer_handler, _send_byte, _send_irq_shift_reg_handler, _send_irq_timer_handler,
+Import ps2kb, send_command, send_cmd, send_data, cmd_response, response_length, FMT_CMD_FAIL
+
+;; Base address of the VIA the keyboard is conencted to
+VIA = IO1
+
+;; @brief #clock cycles to to wait for the last 3 bits after the first 8 have been shifted in
+;; @details
+;;  The last 3 bits take about 230 ms. 
+;;  Calculate the appropriate value using: @f$ N_\text{cycles} = 230 \times f_\text{in MHZ} @f$
+;;  - 230 \@ 1MHz
+;;  - 400 \@ 1.84 MHz
+;; @clock_dependent
+TIMER_RECV = 400
+;; @brief #clock cycles to wait after loading the SR a second time while sending a command to the keyboard
+;; @details
+;;  Enough time must pass for one bit must be shifted out (parity),
+;;  but at most two (parity+stop).
+;;  After that, the interrupt must have happened because the keyboard will pull data low.
+;;  At that point, the shift register needs to be set to input again
+;; 
+;;  Values that seem to work:
+;;  - 230 \@ 1MHz
+;;  - 400 \@ 1.84 MHz
+;; @clock_dependent
+TIMER_SEND = 400
+
+PULL_REG = IO::RANH
+PULL_DDR = IO::DDRA
+; use RA4 to pull the clock low
+PULL_MASK_CLK = %00010000
+
+; using ff because 0 is a possible data byte (set led)
+NO_DATA     = $ff   ;; indicates that no data byte should be send
+NO_RESPONSE = $ff   ;; indicates a command did not receive a response (yet)
+ACK         = $fa   ;; successful transmission
+RESEND      = $fe   ;; unsuccessful transmission
+
+
+.enum STATUS
+    RECEIVE_KEYS	= %10000000     ;;< keyboard sends scancodes
+    RECEIVE_ANSWER	= %01000000     ;;< keyboard replies to a command
+    SEND_CMD   		= %00100000     ;;< host sends/sent the command byte
+    SEND_DATA   	= %00010000     ;;< host sends/sent the data byte
+    SEND_RECV   	= %00001000     ;;< keyboard sends additional data byte
+    SEND        	= SEND_CMD | SEND_DATA | SEND_RECV ;;< host is sending something, only used for checking status
+    NONE			= %00000000
+.endenum
+
+.enum TYPEMATIC
+    REPEAT_MASK     = %00011111     ;;< 00000 = 30Hz, ..., 11111 = 2Hz
+    DELAY250        = %00000000
+    DELAY500        = %00100000
+    DELAY750        = %01000000
+    DELAY1000       = %01100000
+.endenum
+.endscope
+
+; see https://wiki.osdev.org/PS/2_Keyboard
+.macro ps2kb_CmdEcho
+    lda #$ee
+    ldx #ps2kb::NO_DATA
+    ldy #0
+    jsr ps2kb::send_command
+.endmacro
+
+.macro ps2kb_CmdSetLeds mask
+    lda #$ed
+    .ifnblank mask
+    ldx #mask
+    .endif
+    ldy #0
+    jsr ps2kb::send_command
+.endmacro
+
+.macro ps2kb_CmdGetScancodeSet
+    lda #$f0
+    ldx #0
+    ldy #1
+    jsr ps2kb::send_command
+.endmacro
+
+.macro ps2kb_CmdSetScancodeSet set
+    .assert set = 1 .or set = 2 .or set = 3, warning, "ps2kb_CmdSetScancodeSet: invalid scancode set"
+    lda #$f0
+    ldx #set
+    ldy #0
+    jsr ps2kb::send_command
+.endmacro
+
+.macro ps2kb_CmdIdentify
+    lda #$f2
+    ldx #ps2kb::NO_DATA
+    ldy #2
+    jsr ps2kb::send_command
+.endmacro
+
+.macro ps2kb_CmdTypematicSettings settings
+    lda #$f3
+    ldx #settings
+    ldy #0
+    jsr ps2kb::send_command
+.endmacro
+
+.macro ps2kb_CmdEnable
+    lda #$f4
+    ldx #ps2kb::NO_DATA
+    ldy #0
+    jsr ps2kb::send_command
+.endmacro
+
+.macro ps2kb_CmdDisable
+    lda #$f5
+    ldx #ps2kb::NO_DATA
+    ldy #0
+    jsr ps2kb::send_command
+.endmacro
+
+.macro ps2kb_CmdSetTypematic scancode
+    ldy #0
+    .ifblank scancode
+    lda #$f7
+    ldx #ps2kb::NO_DATA
+    .else
+    lda #$fb
+    ldx #scancode
+    .endif
+    jsr ps2kb::send_command
+.endmacro
+
+.macro ps2kb_CmdSetMakeRelease scancode
+    ldy #0
+    .ifblank scancode
+    lda #$f8
+    ldx #ps2kb::NO_DATA
+    .else
+    lda #$fc
+    ldx #scancode
+    .endif
+    jsr ps2kb::send_command
+.endmacro
+
+.macro ps2kb_CmdSetMake scancode
+    ldy #0
+    .ifblank scancode
+    lda #$f9
+    ldx #ps2kb::NO_DATA
+    .else
+    lda #$fd
+    ldx #scancode
+    .endif
+    jsr ps2kb::send_command
+.endmacro
+
+.macro ps2kb_CmdSelfTest
+    lda #$ff
+    ldx #ps2kb::NO_DATA
+    ldy #1
+    jsr ps2kb::send_command
+.endmacro
+
+.macro ps2kb_WaitFinishCmd
+:
+    wai
+    lda ps2kb::status
+    and #ps2kb::STATUS::SEND
+    bne :-
+.endmacro
+
+
+;;********************************************************************************
+;; @note You need to manually include `string.h65` when using this macro!
+;;********************************************************************************
+.macro ps2kb_PrintCmdFailed
+    Printf ps2kb::FMT_CMD_FAIL,ps2kb::send_cmd,ps2kb::send_data,ps2kb::cmd_response,ps2kb::cmd_response+1,ps2kb::cmd_response+2
+.endmacro
+
+
+.endif  ; guard

system/ps2_keyboard.s65

@@ -0,0 +1,482 @@
+.include "ps2_keyboard.h65"
+.include "string.h65"
+.include "lcd.h65"
+.include "parity.h65"
+Export ps2kb, init, begin_receive, scancode, status, scancode_handler
+Export ps2kb, _receive_irq_shift_reg_handler, _receive_irq_timer_handler, _send_byte, _send_irq_shift_reg_handler, _send_irq_timer_handler,
+Export ps2kb, send_command, send_cmd, send_data, cmd_response, response_length, FMT_CMD_FAIL
+
+.bss
+status:                 .res 1  ;; current status
+prev_status:            .res 1  ;; status before sending command
+send_last_bits:         .res 1  ;; last bits to load after 8 bits were shifted out
+send_cmd:               .res 1  ;; command to send/last sent
+send_data:              .res 1  ;; data byte to send/last sent or NO_DATA
+expect_data_length:     .res 1  ;; number of data bytes to expect from keyboard
+response_length:        .res 1  ;; number of response bytes from keyboard
+cmd_response:           .res 3  ;; responses from keyboard
+key_read:               .res 2  ;; first 8 bits, last 3 bits from scancode
+scancode:               .res 1  ;; last received scancode
+scancode_handler:       .res 2  ;; pointer to a function that handles new scancodes
+
+.code
+
+; spi-transferred code will be placed here
+; these are macros and not subroutines to save time during the interrupt handler (no jsr, rts)
+;;********************************************************************************
+;; @macro Enable the clock signal from the keyboard
+;; @modifies A
+;; @details
+;;  Stop pulling the keyboards clock low
+;;********************************************************************************
+.macro _EnableClock
+    ; set pin to input
+    lda ps2kb::VIA + ps2kb::PULL_DDR
+    and #<~ps2kb::PULL_MASK_CLK
+    sta ps2kb::VIA + ps2kb::PULL_DDR
+.endmacro
+
+;;********************************************************************************
+;; @macro Disable the clock signal from the keyboard
+;; @modifies A
+;; @details
+;;  Pulls the keyboards clock low
+;;********************************************************************************
+.macro _DisableClock
+    ; set pin to output
+    lda ps2kb::VIA + ps2kb::PULL_DDR
+    ora #ps2kb::PULL_MASK_CLK
+    sta ps2kb::VIA + ps2kb::PULL_DDR
+    ; set pin low
+    lda ps2kb::VIA + ps2kb::PULL_REG
+    and #<~ps2kb::PULL_MASK_CLK
+    sta ps2kb::VIA + ps2kb::PULL_REG
+.endmacro
+
+
+;;********************************************************************************
+;; @macro Stop pulling the keyboard data pin low
+;; @modifies A
+;;********************************************************************************
+.macro _StopPullDataLow
+    ; set pin to input
+    lda ps2kb::VIA + ps2kb::PULL_DDR
+    and #<~ps2kb::PULL_MASK_DAT
+    sta ps2kb::VIA + ps2kb::PULL_DDR
+.endmacro
+
+;;********************************************************************************
+;; @macro Pull the keyboard data pin low
+;; @modifies A
+;;********************************************************************************
+.macro _PullDataLow
+    ; set pin to output
+    lda ps2kb::VIA + ps2kb::PULL_DDR
+    ora #ps2kb::PULL_MASK_DAT
+    sta ps2kb::VIA + ps2kb::PULL_DDR
+    ; set pin low
+    lda ps2kb::VIA + ps2kb::PULL_REG
+    and #<~ps2kb::PULL_MASK_DAT
+    sta ps2kb::VIA + ps2kb::PULL_REG
+.endmacro
+
+
+;;********************************************************************************
+;; @function Initialize the keyboard
+;; @details
+;;  - @ref _DisableClock "Disable the clock"
+;;  - Initialize variables to 0
+;;  - Clear the VIAs shift register and set T2 to oneshote mode
+;;  - Set scancode_handler to immediately return (dont handle scancodes)
+;; @modifies A
+;;********************************************************************************
+.proc init
+    _DisableClock
+    stz key_read 
+    stz key_read+1
+    stz scancode
+    stz status
+    ; T2 oneshot mode, clear shift reg
+    lda ps2kb::VIA + IO::ACR
+    and #<~IO::ACR_MASK::SR
+    ora #IO::ACR::T2_IRQ_LOAD
+    sta ps2kb::VIA + IO::ACR
+    ; load this rts as scancode_handler
+    StoreDByte @rts, scancode_handler
+@rts:
+    rts
+.endproc
+
+
+;;********************************************************************************
+;; @function Start receiving data from the keyboard
+;; @details
+;;  - use the shift register interrupts to read the first 8 bits
+;;  - configure timer for timing the read of the last 3 bits
+;; @modifies A
+;;********************************************************************************
+.proc begin_receive
+    ; disable timer interrupts (this might be called while waiting on the last 3 bits)
+    IO_DisableIRQ ps2kb::VIA, IO::IRQ::T2
+    ; (re)set shift register to shift in under external clock on CB1
+    lda ps2kb::VIA + IO::ACR
+    and #<~IO::ACR_MASK::SR
+    sta ps2kb::VIA + IO::ACR    ; important, disabling SR resets the count
+    ora #IO::ACR::SR_SIN_PHIE
+    sta ps2kb::VIA + IO::ACR
+    stz key_read
+    stz key_read+1
+    stz scancode
+
+    ; the 3 last bits take about 230us, at @1MHz => wait 230 cycles and then the shift register
+    ; (this could be shorter since the it takes a few cycles after the interrupt)
+    lda #<ps2kb::TIMER_RECV
+    sta ps2kb::VIA + IO::T2CL
+
+    ; set to RECEIVE_KEYS only if RECEIVE_ANSWER is not set
+    bit status
+    bvs @status_set
+    lda #ps2kb::STATUS::RECEIVE_KEYS
+    sta status
+@status_set:
+    ; todo setup irq handlers
+    StoreDByte _receive_irq_shift_reg_handler, $3000
+    StoreDByte _receive_irq_timer_handler, $3060
+
+    _EnableClock
+
+    IO_EnableIRQ ps2kb::VIA, IO::IRQ::SR
+    ; reset and start SR
+    stz ps2kb::VIA + IO::SR
+    rts
+.endproc
+
+
+;;********************************************************************************
+;; @function Read the first 8 bits an
+;; @modifies A
+;; @details
+;;  - read shift register
+;;  - disable shift register interrupts
+;;  - reset shift register
+;;  - enable timer 2 interrupts
+;;  - start timer 2
+;;  IO::SR has to be read before the next bit is shifted in, which happens ~75us after the irq
+;;  at 1MHz, handling this interrupt takes about 50us (without any additional debug code),
+;;  so it should work
+;;********************************************************************************
+.proc _receive_irq_shift_reg_handler
+    lda ps2kb::VIA + IO::SR
+    sta key_read
+    stz ps2kb::VIA + IO::SR
+
+    IO_DisableIRQ ps2kb::VIA, IO::IRQ::SR
+    IO_EnableIRQ ps2kb::VIA, IO::IRQ::T2
+    ; start timer, low order count already in latch after begin_receive
+    lda #>ps2kb::TIMER_RECV
+    sta ps2kb::VIA + IO::T2CH
+    rts
+.endproc
+
+
+;;********************************************************************************
+;; @function Read the last 3 bits after after timer 2 is up
+;; @modifies A
+;; @details
+;;  - read shift register
+;;  - disable timer 2 interrupts
+;;  - enable shift register interrupts
+;;  - reset shift register
+;;  - jump to the subroutine pointed to by scancode_handler
+;;********************************************************************************
+.proc _receive_irq_timer_handler
+    lda ps2kb::VIA + IO::SR
+    sta key_read+1
+
+    lda ps2kb::VIA + IO::T2CL  ; clear interrupt flag
+
+    IO_DisableIRQ ps2kb::VIA, IO::IRQ::T2
+    ; reset SR
+    ; disabling shifting in acr seems necessary to reset - otherwise
+    ; it continues counting and interrupts after the first 5 bits of the next keypress
+    lda #(IO::ACR::SR_SIN_PHIE | IO::ACR::T2_IRQ_LOAD)
+    trb ps2kb::VIA + IO::ACR
+    tsb ps2kb::VIA + IO::ACR
+    stz ps2kb::VIA + IO::SR
+    IO_EnableIRQ ps2kb::VIA, IO::IRQ::SR
+
+    lda key_read+1
+    ror             ; stop bit -> C
+    sta key_read+1  ; parity in bit 0, D7 in bit 1
+    ror             ; parity -> C
+    ror             ; D7 -> C
+    lda key_read  ; not affecting carry
+    rol             ; C  -> bit 0, startbit -> C
+    Reverse A
+    sta scancode
+
+    ; check parity
+    CalculateOddParity
+    eor key_read+1  ; if bit 0 is 1 - parity error
+    and #1          ; bit 1 is still D7
+    bne @parity_error
+@handle_scancode:
+
+    ; check what to do with the scancode
+    bit status
+    bpl @status_not_receive_keys    ; RECEIVE_KEYS
+    jmp (scancode_handler)
+@status_not_receive_keys:
+    bvc @status_dont_handle         ; RECEIVE_ANSWER
+    jmp _process_cmd_answer 
+@status_dont_handle:
+    rts
+@parity_error:      ; TODO handle somehow
+    lda #$fe        ; fe means error/resend for commands
+    sta scancode
+    DEBUG_LED_ON 2
+    bra @handle_scancode
+.endproc
+
+
+;;********************************************************************************
+;; @function Send a command to the keyboard
+;; @details
+;;  No checks are done on the validity of the command and data byte.
+;;  You can send anything you want to the keyboard.
+;;  `send_command` will return immediately, as sending the command is asynchronous.
+;;  The command is done if `ps2kb::status & ps2kb::STATUS::SEND == 0`.
+;;  @section Response
+;;   The answers will be in the byte array ps2kb::cmd_response.
+;;   If the command did not have a data byte, cmd_response is:
+;;       - 0: command response
+;;       - 1: NO_RESPONSE or additional response byte (identify keyboard command only)
+;;       - 2: NO_RESPONSE or additional response byte (identify keyboard command only)
+;;
+;;   If the command did have a data byte, cmd_response is:
+;;       - 0: 0xFA (ACK) or 0xFE (Resend/Error)
+;;       - 1: 0xFA (ACK) or 0xFE (Resend/Error)
+;;       - 2: NO_RESPONSE or additional response byte
+;;
+;;   If ANY of the bytes in cmd_response is 0xFE, the command failed.
+;;  
+;; @modifies A,X,Y
+;; @param A: The command byte
+;; @param X: The data byte or NO_DATA if only the command byte should be sent
+;; @param Y: The number of data bytes expected to receive. Must be one of {0, 1, 2}
+;;********************************************************************************
+.proc send_command
+    sty expect_data_length
+    stx send_data
+    stz response_length
+    ldy #ps2kb::NO_RESPONSE
+    sty cmd_response
+    sty cmd_response+1
+    sty cmd_response+2
+    ldy status
+    sty prev_status
+    ldy #ps2kb::STATUS::SEND_CMD
+    sty status
+    sta send_cmd        ; store if it needs to be resent
+    jmp _send_byte
+.endproc
+
+
+;;********************************************************************************
+;; @function Send a byte to the keyboard
+;; @modifies A,X,Y
+;; @param A: The byte to send
+;; @details
+;;  - pull clock low to stop keyboard transmissions
+;;  - setup SR to shift out
+;;  - pull data low (by shifting out a zero)
+;;  - reset SR
+;;  - put (reversed) byte in SR
+;;  - put parity + stopbit(s) in send_last_bits variable
+;;  - setup interrupt handlers
+;;  - enable clock
+;;********************************************************************************
+.proc _send_byte
+    pha
+        IO_DisableIRQ ps2kb::VIA, (IO::IRQ::T2 | IO::IRQ::SR)
+
+        _DisableClock
+
+        ; set shift register to output
+        ; shift out the startbit = data low
+        ; set SR to shift out with PHI2 and shift out zeros
+        lda ps2kb::VIA + IO::ACR
+        and #<~IO::ACR_MASK::SR
+        ora #IO::ACR::SR_SOUT_PHI2
+        sta ps2kb::VIA + IO::ACR
+        stz ps2kb::VIA + IO::SR
+
+        ; reset shift register to start the count at 0 again
+        and #<~IO::ACR_MASK::SR
+        sta ps2kb::VIA + IO::ACR
+        ; set SR to shift out with external clock
+        ora #IO::ACR::SR_SOUT_PHIE
+        sta ps2kb::VIA + IO::ACR
+
+        ; setup the low timer byte
+        lda #<ps2kb::TIMER_SEND
+        sta ps2kb::VIA + IO::T2CL
+
+        ; setup interrupt handlers
+        StoreDByte _send_irq_shift_reg_handler, $3000
+        StoreDByte _send_irq_timer_handler, $3060
+    pla
+    Reverse A
+    pha
+        CalculateOddParity
+        ror     ; Parity -> C
+        lda #$ff
+        ror     ; Parity -> bit 7, rest = 1
+        sta send_last_bits  ; loaded into SR by irq handler
+    pla
+    sta ps2kb::VIA + IO::SR
+    IO_EnableIRQ ps2kb::VIA, IO::IRQ::SR
+    _EnableClock    
+    rts
+.endproc
+
+
+;;********************************************************************************
+;; @function Send the lasts 3 bits 
+;; @modifies A
+;; @details
+;;  - load the remaining 3 bits of the transmission into the shift register
+;;  - disable shift register interrupts
+;;  - enable timer 2 interrupts
+;;  - start timer 2
+;;********************************************************************************
+.proc _send_irq_shift_reg_handler
+    lda send_last_bits
+    sta ps2kb::VIA + IO::SR
+
+    IO_DisableIRQ ps2kb::VIA, IO::IRQ::SR
+    IO_EnableIRQ ps2kb::VIA, IO::IRQ::T2
+    ; start timer, low order count already in latch after init
+    lda #>ps2kb::TIMER_SEND
+    sta ps2kb::VIA + IO::T2CH
+    rts
+.endproc
+
+
+;;********************************************************************************
+;; @function Setup VIA to receive the keyboard's answer
+;; @modifies A
+;; @details
+;;  - disable timer 2 interrupts
+;;  - pull clock low
+;;  - or status with RECEIVE_ANSWER
+;;  - begin receive
+;;********************************************************************************
+.proc _send_irq_timer_handler
+    lda ps2kb::VIA + IO::T2CL   ; clear interrupt flag
+    IO_DisableIRQ ps2kb::VIA, IO::IRQ::T2
+
+    ; disable shift register
+    lda ps2kb::VIA + IO::ACR
+    and #<~IO::ACR_MASK::SR
+    sta ps2kb::VIA + IO::ACR
+
+    _DisableClock               ; disable keyboard while setting up receive
+    lda status
+    ora #ps2kb::STATUS::RECEIVE_ANSWER
+    sta status
+    jmp ps2kb::begin_receive
+.endproc
+
+
+;;********************************************************************************
+;; @function Process the response of a command
+;; @details
+;;  Stores the answer in the `ps2kb::cmd_response` array.
+;;  If the response is $FE or command related transmissions are done (see below),
+;;  no further data will be sent or received and the `ps2kb::status` takes the previous value.
+;; 
+;;  - store response
+;;  - if response == 0xFE -> stop
+;;  - if status == SEND_CMD -> send databyte
+;;  - if statusk
+;;  You can send anything you want to the keyboard.
+;;  `send_command` will return immediately, as sending the command is asynchronous.
+;;  The command is done if `ps2kb::status & ps2kb::STATUS::SEND == 0`.
+;;  @section Response
+;;   The answers will be in the byte array ps2kb::cmd_response.
+;;   If the command did not have a data byte, cmd_response is:
+;;       - 0: command response
+;;       - 1: NO_RESPONSE or additional response byte (identify keyboard command only)
+;;       - 2: NO_RESPONSE or additional response byte (identify keyboard command only)
+;;   If the command did have a data byte, cmd_response is:
+;;       - 0: 0xFA (ACK) or 0xFE (Resend/Error)
+;;       - 1: 0xFA (ACK) or 0xFE (Resend/Error)
+;;       - 2: NO_RESPONSE or additional response byte
+;;
+;;   If ANY of the bytes in cmd_response is 0xFE, the command failed.
+;;  
+;; @modifies A,X,Y
+;; @param A: The command byte
+;; @param X: The data byte or NO_DATA if only the command byte should be sent
+;; @param Y: The number of data bytes expected to receive. Must be one of {0, 1, 2}
+;;********************************************************************************
+.proc _process_cmd_answer 
+@store_response:
+    ldx response_length
+    lda scancode
+    sta cmd_response,x
+    inx
+    stx response_length
+    stz scancode
+    ; check for resend
+    cmp #$fe
+    beq @cmd_fail
+    ; received something useful, check state
+    lda status
+    bit #ps2kb::STATUS::SEND_CMD
+    bne @cmd_sent
+    bit #ps2kb::STATUS::SEND_DATA
+    bne @everything_sent
+    ; status must be SEND_RECV
+
+@receive_data_response:
+    dec expect_data_length
+    bmi @cmd_done           ; no more expected data
+    rts                     ; wait for another data byte
+
+@cmd_sent:
+    ; check if a data byte needs to be sent
+    lda send_data
+    beq @send_data          ; if 0 (would fall through the cmp check TODO would it??)
+    cmp #ps2kb::NO_DATA
+    beq @everything_sent    ; if not NO_DATA
+@send_data:
+    lda #ps2kb::STATUS::SEND_DATA
+    sta status
+    lda send_data
+    jmp ps2kb::_send_byte          ; send the data
+
+@everything_sent:           ; check if additonal bytes are expected
+    dec expect_data_length
+    bmi @cmd_done           ; expect_data_length was 0
+    lda #(ps2kb::STATUS::SEND_RECV | ps2kb::STATUS::RECEIVE_ANSWER)
+    sta status
+    rts
+
+@cmd_fail:                  ; keyboard wont expect data byte/send an additional response byte
+@cmd_done:
+    ; restore previous status
+    lda prev_status
+    sta status
+    ; disable the clock if the previous was not RECEIVE_KEYS
+    cmp #ps2kb::STATUS::RECEIVE_KEYS
+    beq @rts
+    _DisableClock
+@rts:
+    rts
+.endproc
+
+.rodata
+;; Format string that can be used by other programs for keyboard command errors
+FMT_CMD_FAIL: .asciiz "PS/2 Cmd fail:  %x-%x > %x%x%x  "

system/spi.h65

@@ -1,18 +1,57 @@
-;********************************************************************************
+;;********************************************************************************
-; @module SPI
+;; @file
-; @type driver
+;; @brief SPI Perpiheral
-; @details
+;; @details
-; @depends IO-W65C22N
+;;  Support being a peripheral SPI device.
-;********************************************************************************
+;; @depends IO-W65C22N
+;;********************************************************************************
 .ifndef INCLUDE_SPI
 INCLUDE_SPI = 1
 
 .include "system/system.h65"
 
+;;********************************************************************************
+;; @brief Support being a peripheral SPI device
+;; @details
+;;  This requires the data line to be hooked up to `CB2` and the clock to `CB1`.
+;;  The VIA will be set to shift in the data into the shift register under the external clock.
+;; @ingroup drivers
+;; @see via_hardware_bug "VIA external clock bug"
+;;********************************************************************************
 .scope spi_p
+
+;; Address of the VIA that is used for the spi connection
 SPI_IO = IO2
-.import CODE_START:absolute
+Import spi_p, init, irq_handler, status, buffer_size, recv_size
-Import spi_p, begin, end, read, pages_written, bytes_written
+ImportZp spi_p, buffer_ptr
+Import spi_p, begin_read, end_read, irq_read_byte, recv_bytes
+Import spi_p, begin_write, end_write, irq_write_byte, sent_bytes
+
+
+;;********************************************************************************
+;; @brief Status of a SPI transfer 
+;;********************************************************************************
+.enum STATUS
+    XFER_SIZEL  = %10000000
+    XFER_SIZEH  = %01000000
+    XFER        = %00000001
+    DONE        = %00000000
+    ERROR       = %00100000
+.endenum
 
 .endscope
 .endif  ; guard
+
+; .struct SPI_P_Pins
+;     ; VIA addresses
+;     DDR_a   .word   ; address of the data direction register
+;     R_a     .word   ; address of the register
+;     ; pin mask
+;     SCLK_p  .byte   ; Serial Clock
+;     POCI_p  .byte   ; Peripheral Out / Controller In
+;     PICO_p  .byte   ; Peripheral In / Controller Out
+;     CSB_p   .byte   ; Chip Select
+;     ; settings
+;     CPOL    .byte   ; Clock Polarity
+;     CPHA    .byte   ; Clock Phase
+; .endstruct

system/spi.s65

@@ -1,114 +1,256 @@
 .include "spi.h65"
+.include "system.h65"
 
-Export spi_p, begin, end, read, pages_written, bytes_written
+Export spi_p, init, irq_handler, status, buffer_size, recv_size
+ExportZp spi_p, buffer_ptr
+Export spi_p, begin_read, end_read, irq_read_byte, recv_bytes
+Export spi_p, begin_write, end_write, irq_write_byte, sent_bytes
 
 .zeropage
-code_page:          .res 2  ; CODE_START + pages_written * 256
+buffer_ptr:       .res 2
 .bss
-bytes_written:      .res 1
+recv_bytes:      
-pages_written:      .res 1
+sent_bytes:         .res 2
+status:             .res 1
+buffer_size:        .res 2
+recv_size:          
+send_size:          .res 2
+irq_handler:        .res 2
+
 
 SPI_IO := spi_p::SPI_IO
-CODE_START := spi_p::CODE_START
 
 ; spi-transferred code will be placed here
 ; SPI_P = as peripheral
 .code
-.struct SPI_P_Pins
-    ; VIA addresses
-    DDR_a   .word   ; address of the data direction register
-    R_a     .word   ; address of the register
-    ; pin mask
-    SCLK_p  .byte   ; Serial Clock
-    POCI_p  .byte   ; Peripheral Out / Controller In
-    PICO_p  .byte   ; Peripheral In / Controller Out
-    CSB_p   .byte   ; Chip Select
-    ; settings
-    CPOL    .byte   ; Clock Polarity
-    CPHA    .byte   ; Clock Phase
-.endstruct
 
-;********************************************************************************
+;;********************************************************************************
-; @function Begin listening for SPI transfers
+;; @function Begin listening for SPI transfers
-; @details
+;;********************************************************************************
-;   - initialize variables
+.proc init
-;   - configure shift register to shift in under external clock
+    lda #spi_p::STATUS::DONE
-;   - enable shift register interrupts 
+    sta status
-;********************************************************************************
+    stz recv_bytes
-.proc begin
+    stz recv_bytes+1
-    stz pages_written
+    stz buffer_size
-    stz bytes_written
+    stz buffer_size+1
+    stz recv_size
+    stz recv_size+1
+    rts
+.endproc
+
+
+;;********************************************************************************
+;; @function Begin listening for SPI transfers
+;; @details
+;;  The transfer must be: <SIZE, >SIZE, data (SIZE bytes)
+;;  
+;;  - initialize variables
+;;  - configure shift register to shift in under external clock
+;;  - enable shift register interrupts 
+;; @param ARG0-1: Start address of the buffer
+;; @param ARG2-3: Size of the buffer
+;; @todo: Use irq register handler
+;; @note: The buffer must be large enough for the received data.
+;;********************************************************************************
+.proc begin_read
+    stz recv_bytes
+    stz recv_bytes+1
+    stz recv_size
+    stz recv_size+1
+    lda #spi_p::STATUS::XFER_SIZEL
+    sta status
+
     ; store address in zp
-    lda #<CODE_START
+    lda ARG0
-    sta code_page
+    sta buffer_ptr
-    lda #>CODE_START
+    lda ARG1
-    sta code_page + 1
+    sta buffer_ptr+1
-    ; todo USE MASKS
-    ; set Shift register to shift in under external clock on CB1
-    lda #IO::ACR::SR_SIN_PHIE
-    sta SPI_IO + IO::ACR
 
+    ; load irq handler
+    lda #<irq_read_byte
+    sta irq_handler
+    lda #>irq_read_byte
+    sta irq_handler+1
+
+    ; temporarily store the low byte in buffer, will be checked later
+    lda ARG2
+    sta buffer_size
+    lda ARG3
+    sta buffer_size+1
+    ; set Shift register to shift in under external clock on CB1
+    MaskedWrite SPI_IO+IO::ACR, #IO::ACR::SR_SIN_PHIE, #IO::ACR_MASK::SR
     ; enable SR interrupts
     lda #(IO::IRQ::IRQ | IO::IRQ::SR)
     sta SPI_IO + IO::IER
-
     ; load SR to reset
     lda SPI_IO + IO::SR
     rts
 .endproc
 
 
-;********************************************************************************
+;;********************************************************************************
-; @function Stop listening for SPI transfers
+;; @function Stop reading/writing from/to SPI
-; @details
+;; @details
-;  Disables shift register interrupts
+;;  Disables shift register interrupts
-; @modifies A
+;; @modifies A
-;********************************************************************************
+;;********************************************************************************
-.proc end
+end_write:
+.proc end_read
+    ; disable SR interrupts
+    lda #IO::IRQ::SR
+    sta SPI_IO + IO::IER
+    lda #spi_p::STATUS::DONE
+    sta status
+    rts
+.endproc
+
+
+;;********************************************************************************
+;; @function Read a byte from SPI
+;; @details
+;;  Reads a byte from the shift register and stores it in the SPI code buffer
+;;  The first two bytes must be the size of the incumong data (LE).
+;;  The spi_p:status is updated according to the current stage of the transfer.
+;;  If the buffer size given in begin_read is too small too fit the incoming data,
+;;  the status is set to ERROR and spi (shift register) interrupts are disabled before
+;;  the first real byte is read.
+;; @modifies A,Y
+;;********************************************************************************
+.proc irq_read_byte
+    lda SPI_IO + IO::SR
+    ; Printf "%x",
+    bit status
+    bmi @read_size1   ; bit7 set => XFER_SIZEL
+    bvs @read_size2   ; bit6 set => XFER_SIZEH
+    ldy recv_bytes
+    sta (buffer_ptr),y
+    inc recv_bytes
+    beq @new_page
+    rts
+@new_page:  ; increment high bytes
+    inc recv_bytes+1
+    inc buffer_ptr+1
+    rts
+
+@read_size1:
+    sta recv_size
+    lda #spi_p::STATUS::XFER_SIZEH
+    sta status
+    rts
+
+@read_size2:
+    sta recv_size+1
+    ; check if the buffer is large enough
+    cmp buffer_size+1
+    beq @hieq
+    bcc @enough  ; recv_size+1 < buffer_size+1
+    bra @not_enough
+@hieq:  ; high bytes are equal, check lo
+    lda buffer_size
+    cmp recv_size
+    bcs @enough
+@not_enough:
+    lda #spi_p::STATUS::ERROR
+    sta status
     ; disable SR interrupts
     lda #IO::IRQ::SR
     sta SPI_IO + IO::IER
     rts
+@enough:
+    lda #spi_p::STATUS::XFER
+    sta status
+    rts
 .endproc
 
 
+;;********************************************************************************
+;; @function Begin writing to spi
+;; @details
+;;   - initialize variables
+;;   - configure shift register to shift in under external clock
+;;   - enable shift register interrupts 
+;; @param ARG0-1: Start address of the buffer
+;; @param ARG2-3: Size of the buffer
+;; @todo: Use irq register handler
+;;********************************************************************************
+.proc begin_write
+    stz recv_bytes
+    stz recv_bytes+1
+    ; store address in zp
+    lda #<ARG0
+    sta buffer_ptr
+    lda #>ARG1
+    sta buffer_ptr+1
+    ; store size
+    lda #<ARG2
+    sta buffer_size
+    lda #>ARG3
+    sta buffer_size+1
+    ; load irq handler
+    lda #<irq_read_byte
+    sta irq_handler
+    lda #>irq_read_byte
+    sta irq_handler+1
+    ; set Shift register to shift out under external clock on CB1
+    MaskedWrite SPI_IO+IO::ACR, #IO::ACR::SR_SOUT_PHIE, #IO::ACR_MASK::SR
+    ; enable SR interrupts
+    lda #(IO::IRQ::IRQ | IO::IRQ::SR)
+    sta SPI_IO + IO::IER
+    ; write the first byte
+@write_size1:
+    lda buffer_size
+    sta SPI_IO+IO::SR
+    lda #spi_p::STATUS::XFER_SIZEH
+    sta status
+    rts
+.endproc
+
 ;********************************************************************************
-; @function Read a byte from SPI
+; @function Write a byte
 ; @details
-;  Reads a byte from the shift register and stores it in the SPI code buffer
+;  Write a byte to the spi shift reister
 ; @modifies A,Y
 ;********************************************************************************
-.proc read
+;.proc irq_write_byte
-    ldy bytes_written
+;    ldy sent_bytes
-    lda SPI_IO + IO::SR
+;    lda (buffer_ptr),y
-    sta (code_page),y
+;    sta SPI_IO + IO::SR
-    inc bytes_written
+;    inc sent_bytes
+;    beq @new_page
+;    rts
+;@new_page:
+;    inc sent_bytes+1
+;    inc buffer_ptr+1
+;    rts
+;.endproc
+
+
+;;********************************************************************************
+;; @function Write a byte to SPI
+;; @details
+;;  Write a byte from the buffer to the (spi) shift register.
+;;  The first two bytes are the size of the data (LE).
+;;  The spi_p:status is updated according to the current stage of the transfer.
+;; @modifies A,Y
+;;********************************************************************************
+.proc irq_write_byte
+    bit status
+    bvs @write_size2  ; bit 6 set -> XFER_SIZEH
+    ldy sent_bytes
+    lda (buffer_ptr),y
+    sta SPI_IO + IO::SR
+    inc sent_bytes
     beq @new_page
     rts
 @new_page:
-    inc pages_written
+    inc sent_bytes+1
-    inc code_page + 1
+    inc buffer_ptr+1
+    rts
+@write_size2:
+    lda buffer_size+1
+    sta SPI_IO+IO::SR
+    lda #spi_p::STATUS::XFER
+    sta status
     rts
 .endproc
-
-    
-;********************************************************************************
-; @function Initialize the IO Adapter for SPI
-; @param ARG0-1 Address of the SPI_Pins struct
-;********************************************************************************
-;********************************************************************************
-; @function Read bytes
-; @param X Number of bytes to send
-; @param ARG0-1 Address of the SPI_Pins struct
-; @param ARG2-3 Address of the first byte
-;********************************************************************************
-.proc recv_data
-.endproc
-;********************************************************************************
-; @function Send bytes
-; @param X Number of bytes to send
-; @param ARG0-1 Address of the SPI_Pins struct
-; @param ARG2-3 Address of the first byte
-;********************************************************************************
-.proc send_data
-.endproc

system/system.h65

@@ -1,50 +1,69 @@
-;********************************************************************************
+;;********************************************************************************
-; @module system
+;; @file
-; @type header
+;; @brief System header
-; @details
+;; @ingroup system
-;   Variable definitions for the current hardware setup
+;; @details
-;********************************************************************************
+;;   Variables for the current hardware setup
+;;********************************************************************************
 
 .ifndef INCLUDE_SYSTEM
 INCLUDE_SYSTEM = 1
-; reserved RAM addresses
+
-; 00-0f - free
+;;********************************************************************************
-; 10-1f - arguments / return values
+;; @page system_stuff More System stuff
-; 20-ff - free
+;; @subsubsection ram_reserved Reserved RAM addresses
-; 0100 - 01FF Stack
+;;   - 00-0f - free use  (Z0-Z15)
-; 0200,0201 keybuffer write/read pointer
+;;   - 10-1f - arguments / return values (ARG0-ARG15)
-; 0202-02ff keybuffer
+;;   - 20-ff - free
-; 0300 lcd character counter
+;;   - 0100 - 01FF Stack
-; 0400, 0401, 0402 dht status, dht bit, dht_bit_rot
+;;   - 0200,0201 keypad keybuffer write/read pointer
-; 0403 value offset
+;;   - 0202-02ff keypad keybuffer
-; 0405-04a0 rh high/low, temp high/low, checksum
+;;   - 0300 lcd character counter
+;; @ingroup system
+;;********************************************************************************
 
 .include "io_W65C22.h65"
 .include "utility.h65"
+.importzp Z0,Z1,Z2,Z3,Z4,Z5,Z6,Z7,Z8,Z9,Z10,Z11,Z12,Z13,Z14,Z15
+.importzp ARG0,ARG1,ARG2,ARG3,ARG4,ARG5,ARG6,ARG7,ARG8,ARG9,ARG10,ARG11,ARG12,ARG13,ARG14,ARG15
 
-; ARGUMENTS
+; Z0    = $0
-; a,x,y can also be used 
+; Z1    = $1
-ARG0    = $10
+; Z2    = $2
-ARG1    = $11
+; Z3    = $3
-ARG2    = $12
+; Z4    = $4
-ARG3    = $13
+; Z5    = $5
-ARG4    = $14
+; Z6    = $6
-ARG5    = $15
+; Z7    = $7
-ARG6    = $16
+; Z8    = $8
-ARG7    = $17
+; Z9    = $9
-ARG8    = $18
+; Z10   = $a
-ARG9    = $19
+; Z11   = $b
-ARG10   = $1a
+; Z12   = $c
-ARG11   = $1b
+; Z13   = $d
-ARG12   = $1c
+; Z14   = $e
-ARG13   = $1d
+; Z15   = $f
-ARG14   = $1e
+; ; ARGUMENTS
-ARG15   = $1f
+; ; a,x,y can also be used 
+; ARG0    = $10
+; ARG1    = $11
+; ARG2    = $12
+; ARG3    = $13
+; ARG4    = $14
+; ARG5    = $15
+; ARG6    = $16
+; ARG7    = $17
+; ARG8    = $18
+; ARG9    = $19
+; ARG10   = $1a
+; ARG11   = $1b
+; ARG12   = $1c
+; ARG13   = $1d
+; ARG14   = $1e
+; ARG15   = $1f
 
 
 ; RETURN VALUE 
-; in a
-
 .segment "VIA1"
 ; IO1:    .res 16
 IO1     = $6000
@@ -53,4 +72,13 @@ IO1     = $6000
 ; IO2:    .res 16
 IO2     = $7000
 
+; charmappings for the lcd
+; .charmap 'ü', $F5
+; .charmap 'Ü', $F5
+; .charmap 'ö', $EF
+; .charmap 'Ö', $EF
+; .charmap 'ä', $E1
+; .charmap 'Ä', $E1
+; .charmap 'ß', $E2
+
 .endif ; include guard

system/system.s65

@@ -1,3 +1,42 @@
+; .include "system.h65"
+.exportzp Z0,Z1,Z2,Z3,Z4,Z5,Z6,Z7,Z8,Z9,Z10,Z11,Z12,Z13,Z14,Z15
+.exportzp ARG0,ARG1,ARG2,ARG3,ARG4,ARG5,ARG6,ARG7,ARG8,ARG9,ARG10,ARG11,ARG12,ARG13,ARG14,ARG15
+
 .zeropage
-.org $10
+.org $0
-.res 16
+.assert * = $0, error, "Code not at 0"
+Z0:   .res 1
+Z1:   .res 1
+Z2:   .res 1
+Z3:   .res 1
+Z4:   .res 1
+Z5:   .res 1
+Z6:   .res 1
+Z7:   .res 1
+Z8:   .res 1
+Z9:   .res 1
+Z10:  .res 1
+Z11:  .res 1
+Z12:  .res 1
+Z13:  .res 1
+Z14:  .res 1
+Z15:  .res 1
+; ARGUMENTS
+; a,x,y can also be used 
+.assert * = $10, error, "Code not at 10"
+ARG0:     .res 1
+ARG1:     .res 1
+ARG2:     .res 1
+ARG3:     .res 1
+ARG4:     .res 1
+ARG5:     .res 1
+ARG6:     .res 1
+ARG7:     .res 1
+ARG8:     .res 1
+ARG9:     .res 1
+ARG10:    .res 1
+ARG11:    .res 1
+ARG12:    .res 1
+ARG13:    .res 1
+ARG14:    .res 1
+ARG15:    .res 1

test.s65

@@ -1,55 +0,0 @@
-;.include "system/system.h65"
-;.segment "CODE"
-
-;;********************************************************************************    
-;; Interrupts
-;;********************************************************************************    
-;nmi:
-;    rti
-;irq:
-;    .repeat 20
-;    .endrepeat
-;    rti
-
-;;********************************************************************************    
-;; Reset sequence
-;;********************************************************************************    
-;reset:
-;    sei
-;    ; setup io2 bank a 1-3 
-;    lda #%11111111
-;    sta IO1 + IO_DDRA
-;    sta IO1 + IO_DDRB
-
-;@loop:
-;    lda #%00000000
-;    sta IO1 + IO_RA
-;    .repeat 3
-;        nop
-;    .endrepeat
-;    lda #%11111111
-;    sta IO1 + IO_RA
-;    .repeat 15
-;        nop
-;    .endrepeat
-
-;    lda #%00000000
-;    sta IO1 + IO_RB
-;    .repeat 5
-;        nop
-;    .endrepeat
-;    lda #%11111111
-;    sta IO1 + IO_RB
-;    .repeat 10
-;        nop
-;    .endrepeat
-;    bra @loop
-
-;;********************************************************************************
-;; reset vector
-;;********************************************************************************
-;.segment "RESET_VECTOR"
-;    .word nmi     
-;    .word reset
-;    .word irq
-

util/bit_macros.h65

@@ -0,0 +1,123 @@
+;;********************************************************************************
+;; @file
+;; @brief Macros for bitwise operations
+;; @ingroup libs
+;;********************************************************************************
+
+;;********************************************************************************
+;; @macro Use the bbs instruction by providing the bit as a mask
+;; @details
+;;  This is useful when having a enum with bitmasks, which might change later.
+;; @param mask: A byte where a single bit is set
+;; @param addr: The zero page address to test
+;; @param label: The label to jump to when the bit is set
+;;********************************************************************************
+.macro bbs mask,addr,label
+    .if     mask = %00000001
+    bbs0 addr,label
+    .elseif mask = %00000010
+    bbs1 addr,label
+    .elseif mask = %00000100
+    bbs2 addr,label
+    .elseif mask = %00001000
+    bbs3 addr,label
+    .elseif mask = %00010000
+    bbs4 addr,label
+    .elseif mask = %00100000
+    bbs5 addr,label
+    .elseif mask = %01000000
+    bbs6 addr,label
+    .elseif mask = %10000000
+    bbs7 addr,label
+    .else
+    .fatal .sprintf("bbs macro got invalid mask: %x", mask)
+    .endif
+.endmacro
+
+;;********************************************************************************
+;; @macro Use the bbr instruction by providing the bit as a mask
+;; @details
+;;  This is useful when having a enum with bitmasks, which might change later.
+;; @param mask: A byte where a single bit is set
+;; @param addr: The zero page address to test
+;; @param label: The label to jump to when the bit is clear
+;;********************************************************************************
+.macro bbr mask,addr,label
+    .if     mask = %00000001
+    bbr0 addr,label
+    .elseif mask = %00000010
+    bbr1 addr,label
+    .elseif mask = %00000100
+    bbr2 addr,label
+    .elseif mask = %00001000
+    bbr3 addr,label
+    .elseif mask = %00010000
+    bbr4 addr,label
+    .elseif mask = %00100000
+    bbr5 addr,label
+    .elseif mask = %01000000
+    bbr6 addr,label
+    .elseif mask = %10000000
+    bbr7 addr,label
+    .else
+    .fatal .sprintf("bbr macro got invalid mask: 0x%x", mask)
+    .endif
+.endmacro
+
+;;********************************************************************************
+;; @macro Use the smb instruction by providing the bit as a mask
+;; @details
+;;  This is useful when having a enum with bitmasks, which might change later.
+;; @param mask: A byte where a single bit is set
+;; @param addr: The zero page address to update
+;;********************************************************************************
+.macro smb mask,addr
+    .if     mask = %00000001
+    smb0 addr
+    .elseif mask = %00000010
+    smb1 addr
+    .elseif mask = %00000100
+    smb2 addr
+    .elseif mask = %00001000
+    smb3 addr
+    .elseif mask = %00010000
+    smb4 addr
+    .elseif mask = %00100000
+    smb5 addr
+    .elseif mask = %01000000
+    smb6 addr
+    .elseif mask = %10000000
+    smb7 addr
+    .else
+    .fatal .sprintf("smb macro got invalid mask: 0x%x", mask)
+    .endif
+.endmacro
+
+;;********************************************************************************
+;; @macro Use the rmb instruction by providing the bit as a mask
+;; @details
+;;  This is useful when having a enum with bitmasks, which might change later.
+;; @param mask: A byte where a single bit is set
+;; @param addr: The zero page address to update
+;;********************************************************************************
+.macro rmb mask,addr
+    .if     mask = %00000001
+    rmb0 addr
+    .elseif mask = %00000010
+    rmb1 addr
+    .elseif mask = %00000100
+    rmb2 addr
+    .elseif mask = %00001000
+    rmb3 addr
+    .elseif mask = %00010000
+    rmb4 addr
+    .elseif mask = %00100000
+    rmb5 addr
+    .elseif mask = %01000000
+    rmb6 addr
+    .elseif mask = %10000000
+    rmb7 addr
+    .else
+    .fatal .sprintf("rmb macro got invalid mask: 0x%x", mask)
+    .endif
+.endmacro

util/math.h65

@@ -1,19 +1,21 @@
-;********************************************************************************
+;;********************************************************************************
-; @module math
+;; @file
-; @type utility
+;; @brief Math library
-; @details
+;;********************************************************************************
-;   Math library
-;********************************************************************************
 .ifndef INCLUDE_MATH
 INCLUDE_MATH = 1
 
+;;********************************************************************************
+;; @brief Math library
+;; @ingroup libs
+;;********************************************************************************
 .scope math
 
-;********************************************************************************
+;;********************************************************************************
-; @macro Divide a num (or A) by a factor
+;; @macro Divide a num (or A) by a factor
-; @param num: Memory or A
+;; @param num: Memory or A
-; @param divider: must be power of 2
+;; @param divider: must be power of 2
-;********************************************************************************
+;;********************************************************************************
 .macro div num,divider
 .if divider = 2
     lsr num

util/parity.h65

@@ -0,0 +1,41 @@
+.ifndef INCLUDE_PARITY
+INCLUDE_PARITY = 1
+
+;;********************************************************************************
+;; @file
+;; @brief Macros for calculating parity
+;; @ingroup libs
+;;********************************************************************************
+
+.import count_set_bits
+
+;;********************************************************************************
+;; @macro Calculate even parity
+;; @modifies A, X, Y
+;; @returns A: 0 - even number of set bits, 1 - uneven number of set bits
+;; @returns Y: The number of set bits in the byte
+;;********************************************************************************
+.macro CalculateEvenParity
+    jsr count_set_bits
+    tya
+    and #1
+.endmacro
+
+
+;;********************************************************************************
+;; @macro Calculate odd parity
+;; @details
+;;  Count the number of set bits in Y.
+;;  
+;; @modifies A, X, Y
+;; @returns A: 1 - even number of set bits, 0 - uneven number of set bits
+;; @returns Y: The number of set bits in the byte
+;;********************************************************************************
+.macro CalculateOddParity
+    jsr count_set_bits
+    tya
+    and #1
+    eor #1
+.endmacro
+
+.endif  ; guard

util/parity.s65

@@ -0,0 +1,22 @@
+.export count_set_bits
+
+;;********************************************************************************
+;; @function Count the number of set bits in the `A` register
+;; @modifies A, X, Y
+;; @param A: Byte to count the set bits in
+;; @returns Y: The number of set bits in the byte
+;;********************************************************************************
+.proc count_set_bits
+    ldx #9
+    ldy #0  ; number of set bits
+@loop:
+    dex 
+    beq @done
+    ror
+    bcc @loop
+@set:
+    iny
+    bra @loop
+@done:
+    rts
+.endproc

util/reverse.s65

@@ -0,0 +1,42 @@
+.export REVERSE_TABLE
+
+.rodata
+.align 256
+;;********************************************************************************
+;; @brief A 256 byte table where the *i*-th byte is the value *i* with bits reversed
+;; @see Reverse
+;;********************************************************************************
+REVERSE_TABLE:
+.byte $00, $80, $40, $c0, $20, $a0, $60, $e0
+.byte $10, $90, $50, $d0, $30, $b0, $70, $f0
+.byte $08, $88, $48, $c8, $28, $a8, $68, $e8
+.byte $18, $98, $58, $d8, $38, $b8, $78, $f8
+.byte $04, $84, $44, $c4, $24, $a4, $64, $e4
+.byte $14, $94, $54, $d4, $34, $b4, $74, $f4
+.byte $0c, $8c, $4c, $cc, $2c, $ac, $6c, $ec
+.byte $1c, $9c, $5c, $dc, $3c, $bc, $7c, $fc
+.byte $02, $82, $42, $c2, $22, $a2, $62, $e2
+.byte $12, $92, $52, $d2, $32, $b2, $72, $f2
+.byte $0a, $8a, $4a, $ca, $2a, $aa, $6a, $ea
+.byte $1a, $9a, $5a, $da, $3a, $ba, $7a, $fa
+.byte $06, $86, $46, $c6, $26, $a6, $66, $e6
+.byte $16, $96, $56, $d6, $36, $b6, $76, $f6
+.byte $0e, $8e, $4e, $ce, $2e, $ae, $6e, $ee
+.byte $1e, $9e, $5e, $de, $3e, $be, $7e, $fe
+.byte $01, $81, $41, $c1, $21, $a1, $61, $e1
+.byte $11, $91, $51, $d1, $31, $b1, $71, $f1
+.byte $09, $89, $49, $c9, $29, $a9, $69, $e9
+.byte $19, $99, $59, $d9, $39, $b9, $79, $f9
+.byte $05, $85, $45, $c5, $25, $a5, $65, $e5
+.byte $15, $95, $55, $d5, $35, $b5, $75, $f5
+.byte $0d, $8d, $4d, $cd, $2d, $ad, $6d, $ed
+.byte $1d, $9d, $5d, $dd, $3d, $bd, $7d, $fd
+.byte $03, $83, $43, $c3, $23, $a3, $63, $e3
+.byte $13, $93, $53, $d3, $33, $b3, $73, $f3
+.byte $0b, $8b, $4b, $cb, $2b, $ab, $6b, $eb
+.byte $1b, $9b, $5b, $db, $3b, $bb, $7b, $fb
+.byte $07, $87, $47, $c7, $27, $a7, $67, $e7
+.byte $17, $97, $57, $d7, $37, $b7, $77, $f7
+.byte $0f, $8f, $4f, $cf, $2f, $af, $6f, $ef
+.byte $1f, $9f, $5f, $df, $3f, $bf, $7f, $ff
+

util/string-conversion.s65

@@ -1,6 +1,6 @@
 .include "string.h65"
 .include "math.h65"
-Export str,hex_char_to_uint8, hex_str_to_uint, uint8_to_hex_str
+Export str,hex_char_to_uint8, hex_str_to_uint, uint8_to_hex_str, uint_to_hex_str
 
 .code
 ;
@@ -130,6 +130,55 @@ Export str,hex_char_to_uint8, hex_str_to_uint, uint8_to_hex_str
 .endproc
 
 
+;;********************************************************************************
+;; @function Convert a 1 byte number into two hex characters
+;; @param A: Size of the number in bytes
+;; @param X: Offset onto ARG4, so that the number starts at `ARG4+x` (BE)
+;; @param ARG2-3: Pointer to output string
+;; @param Y: Offset onto the string in ARG2-3
+;; @returns A: 0
+;; @returns X: Offset onto ARG4, past the end of the number
+;; @returns Y: Offset onto the the string in ARG2-3, past the end of the number
+;; @returns N: Clear if success, else set
+;; @modifies A,X,Y
+;;********************************************************************************
+.proc uint_to_hex_str
+@loop:
+    cmp #0
+    beq @rts
+    pha
+    lda ARG4,x
+    phx
+        pha
+            and #%00001111
+            tax
+            lda HEX_CHARS_UPPER,x
+            sta (ARG2),y
+        pla
+        iny
+        beq @overflow2
+        div A,16
+        and #%00001111
+        tax
+        lda HEX_CHARS_UPPER,x
+        sta (ARG2),y
+        iny
+        beq @overflow2
+    plx
+    pla
+    inx
+    beq @overflow
+    bra @loop
+@overflow2:
+    plx
+    pla
+@overflow:
+    lda #$ff  ; set n
+@rts:
+    rts
+.endproc
+
+
 .rodata
 HEX_CHARS_UPPER:    .byte "0123456789ABCDEF"
 HEX_CHARS_LOWER:    .byte "0123456789abcdef"

util/string.h65

@@ -1,20 +1,31 @@
-;********************************************************************************
+;;********************************************************************************
-; @module string
+;; @file
-; @type utility
+;; @brief String utility library
-; @details
+;; @details
-;   String utility
+;; @see str
-;********************************************************************************
+;;********************************************************************************
 .ifndef INCLUDE_STRING
 INCLUDE_STRING = 1
 
 .include "system/system.h65"
 
 
+;;********************************************************************************
+;; @brief String utility
+;; @ingroup libs
+;;********************************************************************************
 .scope str
-Import str, strf
+Import str, strf, printf_buffer
-Import str, hex_char_to_uint8, hex_str_to_uint, uint8_to_hex_str
+Import str, hex_char_to_uint8, hex_str_to_uint
+Import str, uint8_to_hex_str, uint_to_hex_str
 
 
+;;********************************************************************************
+;; @macro Helper for str::Strf macro
+;; @details
+;;  Store arg in ARG4-ARG... and increment counter variable `\@N_ARGS` by one.
+;;  Arg can be x, y, immediate or an address
+;;********************************************************************************
 .macro _StrfStoreArg arg
 .if (.not .blank(arg))
     .if .match(arg, x)
@@ -29,15 +40,15 @@ Import str, hex_char_to_uint8, hex_str_to_uint, uint8_to_hex_str
 .endif
 .endmacro
 
-;********************************************************************************
+;;********************************************************************************
-; @function Macro for passing arguments to strf
+;; @macro Macro for passing arguments to strf
-; @param fmt:   Format string address or string literal
+;; @param fmt:   Format string address or string literal
-; @param out:   Output string address
+;; @param out:   Output string address
-; @param x0-x9: Additional parameters
+;; @param x0-x9: Additional parameters
-; @warning Addresses as additional paramters must be passed like this `#<addr,#>addr`
+;; @warning Addresses as additional paramters must be passed like this `#<addr,#>addr`
-; @modifies: A, X, Y
+;; @modifies A, X, Y, ARG4, ARG5
-; @see strf
+;; @see str::strf
-;********************************************************************************
+;;********************************************************************************
 .macro Strf fmt,out,x0,x1,x2,x3,x4,x5,x6,x7,x8,x9
     @N_ARGS .set 0  ; @ so that it doesnt break cheap labels
      .if .match(fmt, "")  ; fmt is a string literal -> store in rodata
@@ -73,8 +84,16 @@ Import str, hex_char_to_uint8, hex_str_to_uint, uint8_to_hex_str
     ; .out .sprintf("info: Strf: called with %d arguments", @N_ARGS)
 .endmacro
 
-; TODO allocate zp memory
+;;********************************************************************************
-fmt_idx = $30
+;; @function Macro for formated printing
-out_idx = $31
+;; @details
+;;  Pass all arguments to str::Strf macro, then call lcd::PrintNC macro
+;; @see str::strf
+;;********************************************************************************
+.macro Printf fmt,x0,x1,x2,x3,x4,x5,x6,x7,x8,x9
+    Strf fmt,str::printf_buffer,x0,x1,x2,x3,x4,x5,x6,x7,x8,x9
+    PrintNC str::printf_buffer
+.endmacro
+
 .endscope
 .endif  ; guard

util/string.s65

@@ -1,24 +1,38 @@
 .include "string.h65"
-Export str, strf
+Export str, strf, printf_buffer
 
+.bss
+;;********************************************************************************
+;; @brief Used to store output string of Printf macro
+;; @todo Use dynamically allocated buffer when a memory allocator is implemented
+;;********************************************************************************
+printf_buffer: .res $41
+
+.zeropage
+fmt_idx: .res 1
+out_idx: .res 1
+pad_zero:.res 1
+digits:  .res 1
+; addr:    .res 2
 .code
-;********************************************************************************
+;;********************************************************************************
-; @function Format a string
+;; @function Format a string
-; @details
+;; @details
-;   If there is no value to be read, the Pz will be set
+;;  If there is no value to be read, the `Pz` will be set
-;   Formats:
+;;  Formats:
-;   - x: unsigned hex integer (1 byte) -> 2 chars
+;;  - `x`: unsigned hex integer (1 byte) -> 2 chars
-;   - X: unsigned hex integer (2 byte) -> 4 chars TODO
+;;  - `X`: unsigned hex integer (2 byte) -> 4 chars TODO
-;   - u: unsigned decimal integer (1 byte) TODO
+;;  - `u`: unsigned decimal integer (1 byte) TODO
-;   - U: unsigned decimal integer (2 bytes) TODO
+;;  - `U`: unsigned decimal integer (2 bytes) TODO
-; @param ARG0-1: Format string address
+;;  - `s`: null-terminated string  (2 bytes ptr)
-; @param ARG2-3: Output string address
+;;  - `c`: char
-; @param ARG4+:  Additional parameters
+;; @todo Implement decimal, test X
-; @returns 
+;; @param ARG0-1: Format string address
-; @modifies: A, X, Y
+;; @param ARG2-3: Output string address
-;********************************************************************************
+;; @param ARG4+:  Additional parameters
-out_idx := str::out_idx
+;; @returns 
-fmt_idx := str::fmt_idx
+;; @modifies A, X, Y, ARG4, ARG5
+;;********************************************************************************
 .proc strf
     stz out_idx
     stz fmt_idx
@@ -27,7 +41,7 @@ fmt_idx := str::fmt_idx
 @loop:
     ldy fmt_idx
     lda (ARG0),y
-    beq @null
+    jeq @null
     cmp #'%'
     beq @percent
 @normal_char:  ; store A in output string
@@ -42,29 +56,88 @@ fmt_idx := str::fmt_idx
         sty fmt_idx
         lda (ARG0),y
         beq @null
+        ; padding
+        cmp #'0'
+        beq @percent_zero
+        stz pad_zero
         ; formats
         cmp #'x'
         beq @format_hex1
+        cmp #'X'
+        beq @format_hex2
+        cmp #'c'
+        beq @format_char
+
         bra @normal_char
+@percent_zero:
+        sta pad_zero
+        bra @percent
+; @percent_num:
+;         sta pad_zero
+;         bra @percent
+
 @format_hex1:   ; 1 byte hex -> 2 chars
             lda ARG4,x
             phx
-            jsr str::uint8_to_hex_str
+                jsr str::uint8_to_hex_str
-            ldy out_idx
+                ldy out_idx
-            sta (ARG2),y  ; most sig digit
+                sta (ARG2),y  ; most sig digit
+                txa
+            plx
             iny
             beq @out_overflow
-            txa
             sta (ARG2),y  ; least sig digit
             iny
             beq @out_overflow
             sty out_idx
-            plx
             inx  ; 1 byte of args handeled
-            ; bra @format_return
+            bra @format_return
-@format_return:  ; increment fmt_idx to swallow the formating char
+
-        inc fmt_idx
+@format_hex2:   ; 2 byte hex -> 4 chars
-        bra @loop
+            lda #2
+            ldy out_idx
+            jsr str::uint_to_hex_str
+            bmi @out_overflow  ; might also be x overflow
+            sty out_idx
+            bra @format_return
+
+@format_char:   ; 1 char
+            lda ARG4,x
+            ldy out_idx
+            sta (ARG2),y
+            inc out_idx
+            beq @out_overflow
+            inx
+            bra @format_return
+
+@format_string:   ; string
+            ldy #0
+            cpx #0
+            beq @format_string_loop
+            ; store the pointer to the string at arg4-5
+@format_string_move_ptr:
+            lda ARG4,x
+            sta ARG4
+            lda ARG5,x
+            sta ARG5
+@format_string_loop:
+            lda (ARG4),y
+            beq @format_string_end  ; if null
+            phy
+            ldy out_idx
+            sta (ARG2),y
+            inc out_idx
+            beq @out_overflow
+            ply
+            iny
+@format_string_end:
+            inx
+            inx
+            bra @format_return
+
+@format_return:  ; increment fmt_idx to account for the formating char
+        inc fmt_idx  ; at this point, out_idx will always overflow first
+        jmp @loop
 @out_overflow:  ; store 0 in last position
     ldy #$ff
     sty out_idx

utility.h65

@@ -1,32 +1,133 @@
 .ifndef INCLUDE_UTILITY
 INCLUDE_UTILITY = 1
 
+;;********************************************************************************
+;; @file
+;; @brief Various useful macros
+;; @ingroup libs
+;;********************************************************************************
+
 .macpack longbranch     ; jeq, jge...
 .macpack generic        ; bge, add, sub
 
 .feature string_escapes
 .feature underline_in_numbers
 
+.include "bit_macros.h65"
 
-;********************************************************************************
+.macro DEBUG_LED_OFF nr
-; @macro Update a byte in memory using a mask
+    pha
-; @param addr       Address of the byte to update
+    lda IO1 + IO::RA
-; @param value      New value
+.if nr = 0
-; @param mask       Mask of the bits to affect by the new value
+    and #%11111110
-; @details
+.elseif nr = 1
-;   xor #value with addr -> only bits that need to flip are 1
+    and #%11111101
-;   and result with #mask -> only selected bits that need to flip stay 1
+.else
-;   xor result with addr -> flips selected bits
+    and #%11111011
-;********************************************************************************
+.endif
+    sta IO1 + IO::RA
+    pla
+.endmacro
+
+.macro DEBUG_LED_ON nr
+    pha
+    lda IO1 + IO::RA
+.if nr = 0
+    ora #%00000001
+.elseif nr = 1
+    ora #%00000010
+.else
+    ora #%00000100
+.endif
+    sta IO1 + IO::RA
+    pla
+.endmacro
+
+
+;;********************************************************************************
+;; @macro Store a double byte (immediate) at an address
+;; @param addr      Address, double byte will be loaded in LE to addr, addr+1 
+;; @param dbyte     Location or value
+;; @param reg       Register, defaults to A
+;; @modifies        
+;;********************************************************************************
+.macro StoreDByte dbyte,addr,reg
+    ; .out .sprintf("%x, %x", dbyte, addr)
+.if .blank(reg) .or .match(reg, A)
+    lda #<dbyte
+    sta addr
+    lda #>dbyte
+    sta addr+1
+.elseif .match(reg, X)
+    ldx #<dbyte
+    stx addr
+    ldx #>dbyte
+    stx addr+1
+.elseif .match(reg, Y)
+    ldy #<dbyte
+    sty addr
+    ldy #>dbyte
+    sty addr+1
+.else
+    .fatal "Invalid reg given to StoreDByte"
+.endif
+.endmacro
+
+;;********************************************************************************
+;; @macro Update a byte in memory using a mask
+;; @param addr       Address of the byte to update
+;; @param value      New value
+;; @param mask       Mask of the bits to affect by the new value
+;; @details
+;;   xor #value with addr -> only bits that need to flip are 1
+;;   and result with #mask -> only selected bits that need to flip stay 1
+;;   xor result with addr -> flips selected bits
+;; @TODO optimize when immediate is used
+;;********************************************************************************
 .macro MaskedWrite addr,value,mask
-    lda #value
+    .if .not .match(value, A)
+    lda value
+    .endif
     eor addr
-    and #mask
+    and mask
     eor addr
     sta addr
 .endmacro
 
 
+
+;;********************************************************************************
+;; @macro Jump to the subroutine and let the routine return at another location
+;; @details
+;;  By using a indirect address `(addr)` and no ret_val, this macro behaves
+;;  like an indirect version of jsr.
+;; @param addr       Target of the jump (can be: `addr`, `(addr)` or `{(addr,x)}`
+;; @param ret_addr   Return address (optional)
+;; @details
+;;********************************************************************************
+.macro JsrIndirect addr,ret_addr
+    ; -1 because rts increments it
+    .if .blank(ret_addr)
+    lda #>(:+ - 1)
+    pha
+    lda #<(:+ - 1)
+    pha
+    .else
+    lda #>(ret_addr -1)
+    pha
+    lda #<(ret_addr -1)
+    pha
+    .endif
+    jmp addr
+.if .blank(ret_addr)
+:
+.endif
+.endmacro
+
+
+
+
+
 _n_genlabel .set 0
 ;;********************************************************************************
 ;; @macro Generate a unique label
@@ -91,4 +192,28 @@ _n_genlabel .set 0
     .ident(.sprintf("%s", .string(l1))) = .ident(.sprintf("%s_%s", .string(prefix), .string(l1)))
     ImportZp prefix,l2,l3,l4,l5,l6,l7,l8
 .endmacro
-.endif
+
+
+.import REVERSE_TABLE
+;;********************************************************************************
+;; @macro Reverse a byte using a @ref REVERSE_TABLE "table"
+;; @param reg: The byte to reverse. May be in X, Y or A
+;; @returns A: The reversed byte
+;; @modifies A, X (only when reg = A)
+;;********************************************************************************
+.macro Reverse reg
+    .if .match(reg, A)
+        tax
+        lda REVERSE_TABLE,x
+    .elseif .match(reg, x)
+        lda REVERSE_TABLE,x
+    .elseif .match(reg, y)
+        lda REVERSE_TABLE,y
+    .else
+        .fatal ("Reverse macro got invalid argument. This syntax error is intentional to show the line number")
+    .endif
+.endmacro
+
+
+
+.endif  ; guard