send commands working
This commit is contained in:
parent
23e5e3cd35
commit
e8696cc312
@ -2,22 +2,26 @@
|
||||
.include "string.h65"
|
||||
.include "lcd.h65"
|
||||
.include "parity.h65"
|
||||
Export ps2kb,init,begin_receive,send_command,scancode,status,scancode_handler
|
||||
Export ps2kb, init, begin_receive, scancode, status, scancode_handler
|
||||
Export ps2kb, _receive_irq_shift_reg_handler, _receive_irq_timer_handler, _send_byte, _send_irq_shift_reg_handler, _send_irq_timer_handler,
|
||||
Export ps2kb, send_last_bits, send_cmd, send_data, key_read, prev_status
|
||||
Export ps2kb, send_command, send_cmd, send_data, cmd_response, response_length, FMT_CMD_FAIL
|
||||
|
||||
.bss
|
||||
status: .res 1
|
||||
prev_status: .res 1
|
||||
send_last_bits: .res 1
|
||||
send_data: .res 1
|
||||
send_cmd: .res 1
|
||||
key_read: .res 2
|
||||
scancode: .res 1
|
||||
scancode_handler: .res 2
|
||||
status: .res 1 ; current status
|
||||
prev_status: .res 1 ; status before sending command
|
||||
send_last_bits: .res 1 ; last bits to load after 8 bits were shifted out
|
||||
send_cmd: .res 1 ; command to send/last sent
|
||||
send_data: .res 1 ; data byte to send/last sent or NO_DATA
|
||||
expect_data_length: .res 1 ; number of data bytes to expect from keyboard
|
||||
response_length: .res 1 ; number of response bytes from keyboard
|
||||
cmd_response: .res 3 ; responses from keyboard
|
||||
key_read: .res 2 ; first 8 bits, last 3 bits from scancode
|
||||
scancode: .res 1 ; last received scancode
|
||||
scancode_handler: .res 2 ; pointer to a function that handles new scancodes
|
||||
|
||||
.code
|
||||
|
||||
; these are macros the save time during the interrupt handler (no jsr, rts)
|
||||
;;********************************************************************************
|
||||
;; @macro Enable the clock signal from the keyboard
|
||||
;; @modifies: A
|
||||
@ -113,13 +117,14 @@ scancode_handler: .res 2
|
||||
stz key_read
|
||||
stz key_read+1
|
||||
stz scancode
|
||||
bit status
|
||||
|
||||
; the 3 last bits take about 230us, at @1MHz => wait 230 cycles and then the shift register
|
||||
; (this could be shorter since the it takes a few cycles after the interrupt)
|
||||
lda #<ps2kb::TIMER_RECV
|
||||
sta ps2kb::VIA + IO::T2CL
|
||||
|
||||
; set to RECEIVE_KEYS only if RECEIVE_ANSWER is not set
|
||||
bit status
|
||||
bvs @status_set
|
||||
lda #ps2kb::STATUS::RECEIVE_KEYS
|
||||
sta status
|
||||
@ -157,7 +162,7 @@ scancode_handler: .res 2
|
||||
|
||||
IO_DisableIRQ ps2kb::VIA, IO::IRQ::SR
|
||||
IO_EnableIRQ ps2kb::VIA, IO::IRQ::T2
|
||||
; start timer, low order count already in latch after init
|
||||
; start timer, low order count already in latch after begin_receive
|
||||
lda #>ps2kb::TIMER_RECV
|
||||
sta ps2kb::VIA + IO::T2CH
|
||||
rts
|
||||
@ -201,41 +206,68 @@ scancode_handler: .res 2
|
||||
sta scancode
|
||||
|
||||
; check parity
|
||||
; CalculateOddParity
|
||||
; eor key_read+1 ; if bit 0 is 1 - parity error
|
||||
; and #1 ; bit 1 is still D7
|
||||
; bne @parity_error
|
||||
CalculateOddParity
|
||||
eor key_read+1 ; if bit 0 is 1 - parity error
|
||||
and #1 ; bit 1 is still D7
|
||||
bne @parity_error
|
||||
@handle_scancode:
|
||||
|
||||
; check what to do with the scancode
|
||||
bit status
|
||||
bcc @status_not_receive_keys
|
||||
bpl @status_not_receive_keys ; RECEIVE_KEYS
|
||||
jmp (scancode_handler)
|
||||
@status_not_receive_keys:
|
||||
bvc @status_ignore
|
||||
bvc @status_dont_handle ; RECEIVE_ANSWER
|
||||
jmp _process_cmd_answer
|
||||
@status_ignore:
|
||||
@status_dont_handle:
|
||||
rts
|
||||
@parity_error: ; TODO handle somehow
|
||||
lda #$ff
|
||||
@parity_error: ; TODO handle somehow
|
||||
lda #$fe ; fe means error/resend for commands
|
||||
sta scancode
|
||||
DEBUG_LED_ON 2
|
||||
rts
|
||||
bra @handle_scancode
|
||||
.endproc
|
||||
|
||||
|
||||
;;********************************************************************************
|
||||
;; @function Send a command to the keyboard
|
||||
;; @details
|
||||
;; No checks are done on the validity of the command and data byte.
|
||||
;; You can send anything you want to the keyboard.
|
||||
;; `send_command` will return immediately, as sending the command is asynchronous.
|
||||
;; The command is done if `ps2kb::status & ps2kb::STATUS::SEND == 0`.
|
||||
;; @section Response
|
||||
;; The answers will be in the byte array ps2kb::cmd_response.
|
||||
;; If the command did not have a data byte, cmd_response is:
|
||||
;; - 0: command response
|
||||
;; - 1: NO_RESPONSE or additional response byte (identify keyboard command only)
|
||||
;; - 2: NO_RESPONSE or additional response byte (identify keyboard command only)
|
||||
|
||||
;; If the command did have a data byte, cmd_response is:
|
||||
;; - 0: 0xFA (ACK) or 0xFE (Resend/Error)
|
||||
;; - 1: 0xFA (ACK) or 0xFE (Resend/Error)
|
||||
;; - 2: NO_RESPONSE or additional response byte
|
||||
;;
|
||||
;; If ANY of the bytes in cmd_response is 0xFE, the command failed.
|
||||
;;
|
||||
;; @modifies: A,X,Y
|
||||
;; @param A: The command byte
|
||||
;; @param X: The data byte or NO_DATA if only the command byte should be sent
|
||||
;; @param Y: The number of data bytes expected to receive. Must be one of {0, 1, 2}
|
||||
;;********************************************************************************
|
||||
.proc send_command
|
||||
sty expect_data_length
|
||||
stx send_data
|
||||
stz response_length
|
||||
ldy #ps2kb::NO_RESPONSE
|
||||
sty cmd_response
|
||||
sty cmd_response+1
|
||||
sty cmd_response+2
|
||||
ldy status
|
||||
sty prev_status
|
||||
ldy #ps2kb::STATUS::SEND_CMD
|
||||
sty status
|
||||
sta send_cmd ; store if it needs to be resent
|
||||
stx send_data
|
||||
jmp _send_byte
|
||||
.endproc
|
||||
|
||||
@ -278,8 +310,9 @@ scancode_handler: .res 2
|
||||
lda #<ps2kb::TIMER_SEND
|
||||
sta ps2kb::VIA + IO::T2CL
|
||||
|
||||
; setup interrupt handlers
|
||||
StoreDByte _send_irq_shift_reg_handler, $3000
|
||||
StoreDByte _send_irq_timer_handler, $3006
|
||||
StoreDByte _send_irq_timer_handler, $3060
|
||||
pla
|
||||
Reverse A
|
||||
pha
|
||||
@ -287,7 +320,7 @@ scancode_handler: .res 2
|
||||
ror ; Parity -> C
|
||||
lda #$ff
|
||||
ror ; Parity -> bit 7, rest = 1
|
||||
sta ps2kb::send_last_bits ; loaded into SR by irq handler
|
||||
sta send_last_bits ; loaded into SR by irq handler
|
||||
pla
|
||||
sta ps2kb::VIA + IO::SR
|
||||
IO_EnableIRQ ps2kb::VIA, IO::IRQ::SR
|
||||
@ -306,7 +339,7 @@ scancode_handler: .res 2
|
||||
;; - start timer 2
|
||||
;;********************************************************************************
|
||||
.proc _send_irq_shift_reg_handler
|
||||
lda ps2kb::send_last_bits
|
||||
lda send_last_bits
|
||||
sta ps2kb::VIA + IO::SR
|
||||
|
||||
IO_DisableIRQ ps2kb::VIA, IO::IRQ::SR
|
||||
@ -319,34 +352,120 @@ scancode_handler: .res 2
|
||||
|
||||
|
||||
;;********************************************************************************
|
||||
;; @function Send databyte or reveice the keyboards answer
|
||||
;; @modifies: A, X, Y
|
||||
;; @function Setup VIA to receive the keyboard's answer
|
||||
;; @modifies: A
|
||||
;; @details
|
||||
;; - disable timer 2 interrupts
|
||||
;; - if send_data is zero:
|
||||
;; - begin_receive
|
||||
;; - set status RECEIVE_ANSWER
|
||||
;; - else
|
||||
;; - send_byte send_data
|
||||
;; - set send_data = 0
|
||||
;; - pull clock low
|
||||
;; - or status with RECEIVE_ANSWER
|
||||
;; - begin receive
|
||||
;;********************************************************************************
|
||||
.proc _send_irq_timer_handler
|
||||
lda ps2kb::VIA + IO::T2CL ; clear interrupt flag
|
||||
lda ps2kb::VIA + IO::T2CL ; clear interrupt flag
|
||||
IO_DisableIRQ ps2kb::VIA, IO::IRQ::T2
|
||||
|
||||
lda ps2kb::send_data
|
||||
beq @receive
|
||||
stz ps2kb::send_data
|
||||
jmp _send_byte
|
||||
rts
|
||||
@receive:
|
||||
_DisableClock ; disable keyboard while setting up receive
|
||||
lda #ps2kb::STATUS::RECEIVE_ANSWER
|
||||
sta ps2kb::status
|
||||
; disable shift register
|
||||
lda ps2kb::VIA + IO::ACR
|
||||
and #<~IO::ACR_MASK::SR
|
||||
sta ps2kb::VIA + IO::ACR
|
||||
|
||||
_DisableClock ; disable keyboard while setting up receive
|
||||
lda status
|
||||
ora #ps2kb::STATUS::RECEIVE_ANSWER
|
||||
sta status
|
||||
jmp ps2kb::begin_receive
|
||||
.endproc
|
||||
|
||||
|
||||
.proc _process_cmd_answer
|
||||
jmp ($3200)
|
||||
;;********************************************************************************
|
||||
;; @function Process the response of a command
|
||||
;; @details
|
||||
;; Stores the answer in the `ps2kb::cmd_response` array.
|
||||
;; If the response is $FE or command related transmissions are done (see below),
|
||||
;; no further data will be sent or received and the `ps2kb::status` takes the previous value.
|
||||
;;
|
||||
;; - store response
|
||||
;; - if response == 0xFE -> stop
|
||||
;; - if status == SEND_CMD -> send databyte
|
||||
;; - if statusk
|
||||
;; You can send anything you want to the keyboard.
|
||||
;; `send_command` will return immediately, as sending the command is asynchronous.
|
||||
;; The command is done if `ps2kb::status & ps2kb::STATUS::SEND == 0`.
|
||||
;; @section Response
|
||||
;; The answers will be in the byte array ps2kb::cmd_response.
|
||||
;; If the command did not have a data byte, cmd_response is:
|
||||
;; - 0: command response
|
||||
;; - 1: NO_RESPONSE or additional response byte (identify keyboard command only)
|
||||
;; - 2: NO_RESPONSE or additional response byte (identify keyboard command only)
|
||||
|
||||
;; If the command did have a data byte, cmd_response is:
|
||||
;; - 0: 0xFA (ACK) or 0xFE (Resend/Error)
|
||||
;; - 1: 0xFA (ACK) or 0xFE (Resend/Error)
|
||||
;; - 2: NO_RESPONSE or additional response byte
|
||||
;;
|
||||
;; If ANY of the bytes in cmd_response is 0xFE, the command failed.
|
||||
;;
|
||||
;; @modifies: A,X,Y
|
||||
;; @param A: The command byte
|
||||
;; @param X: The data byte or NO_DATA if only the command byte should be sent
|
||||
;; @param Y: The number of data bytes expected to receive. Must be one of {0, 1, 2}
|
||||
;;********************************************************************************
|
||||
.proc _process_cmd_answer
|
||||
@store_response:
|
||||
ldx response_length
|
||||
lda scancode
|
||||
sta cmd_response,x
|
||||
inx
|
||||
stx response_length
|
||||
stz scancode
|
||||
; check for resend
|
||||
cmp #$fe
|
||||
beq @cmd_fail
|
||||
; received something useful, check state
|
||||
lda status
|
||||
bit #ps2kb::STATUS::SEND_CMD
|
||||
bne @cmd_sent
|
||||
bit #ps2kb::STATUS::SEND_DATA
|
||||
bne @everything_sent
|
||||
; status must be SEND_RECV
|
||||
|
||||
@receive_data_response:
|
||||
dec expect_data_length
|
||||
bmi @cmd_done ; no more expected data
|
||||
rts ; wait for another data byte
|
||||
|
||||
@cmd_sent:
|
||||
; check if a data byte needs to be sent
|
||||
lda send_data
|
||||
beq @send_data ; if 0 (would fall through the cmp check TODO would it??)
|
||||
cmp #ps2kb::NO_DATA
|
||||
beq @everything_sent ; if not NO_DATA
|
||||
@send_data:
|
||||
lda #ps2kb::STATUS::SEND_DATA
|
||||
sta status
|
||||
lda send_data
|
||||
jmp ps2kb::_send_byte ; send the data
|
||||
|
||||
@everything_sent: ; check if additonal bytes are expected
|
||||
dec expect_data_length
|
||||
bmi @cmd_done ; expect_data_length was 0
|
||||
lda #(ps2kb::STATUS::SEND_RECV | ps2kb::STATUS::RECEIVE_ANSWER)
|
||||
sta status
|
||||
rts
|
||||
|
||||
@cmd_fail: ; keyboard wont expect data byte/send an additional response byte
|
||||
@cmd_done:
|
||||
; restore previous status
|
||||
lda prev_status
|
||||
sta status
|
||||
; disable the clock if the previous was not RECEIVE_KEYS
|
||||
cmp #ps2kb::STATUS::RECEIVE_KEYS
|
||||
beq @rts
|
||||
_DisableClock
|
||||
@rts:
|
||||
rts
|
||||
.endproc
|
||||
|
||||
.rodata
|
||||
;; Can be used by other programs
|
||||
FMT_CMD_FAIL: .asciiz "PS/2 Cmd fail: %x-%x > %x%x%x "
|
||||
|
||||
Loading…
Reference in New Issue
Block a user