cpdctrl-gui/cpdctrl_gui/resources/user_guide.md

Quickstart Guide

1. Start the cpdctrl-gui software (cpd icon)
2. Click "Power On" to power on devices connected to the USB Switch
3. Make sure all devices are turned on
4. If not connected already, click "CPD devices" and "LED devices" to connect the measurement device and LED controller
5. Set the LED to a constant brightness value or load a LED script file
6. Set the measurement name
7. Click Start
8. In the "LED Script" tab, you can see the current LED state during measurement
9. When done, power off the devices