refactor
This commit is contained in:
matthias@rpi
parent
824ecec13d
commit
1eb3435181
281
eeprom.py
281
eeprom.py
@ -19,7 +19,7 @@ gpio_r = [14, 15, 18, 23, 24, 25, 8, 7, 12, 16, 20, 21]
|
||||
A = [
|
||||
# 27, 22, 10, 9, 11, 5, 6, 13,
|
||||
13, 6, 5, 11, 9, 10, 22, 27, # A0 - A7
|
||||
2, 3, 4, 17, # A8 - A11
|
||||
2, 3, 17, 4, # A8 - A11
|
||||
23, 18, 15 # A12 - A14
|
||||
]
|
||||
|
||||
@ -45,27 +45,18 @@ t_WP = 100 * 1e-9 # Write Pulse Width
|
||||
t_DS = 50 * 1e-9 # Data Setup Time_CS = 0
|
||||
t_DH = 0 # Data Hold Time
|
||||
t_WPH = 50 * 1e-9 # Write Puls High
|
||||
# t_WPH = 50 * 1e-4 # Write Pulse High !!!2*e5 longer than in Datasheet, since shorter high caused Problems with my Chip!!!
|
||||
t_WPH = 50 * 1e-4 # Write Pulse High !!!2*e5 longer than in Datasheet, since shorter high caused Problems with my Chip!!!
|
||||
|
||||
PRINT_HEX = True
|
||||
PRINT_BIN = False
|
||||
PRINT_DEC = False
|
||||
REP_CHAR = '\n'
|
||||
|
||||
|
||||
|
||||
def setup_address_control_pins():
|
||||
# setup the pins
|
||||
GPIO.setmode(GPIO.BCM)
|
||||
for pin in controls:
|
||||
GPIO.setup(pin, OUT, initial=1) # inverted, is 1 means disable
|
||||
for pin in A:
|
||||
GPIO.setup(pin, OUT, initial=0)
|
||||
|
||||
def setup_io_pins(IOdirection=OUT):
|
||||
# OUT when writing and IN when reading
|
||||
for pin in IO:
|
||||
GPIO.setup(pin, IOdirection)
|
||||
|
||||
def cleanup():
|
||||
GPIO.cleanup()
|
||||
|
||||
|
||||
#
|
||||
# UTILITY
|
||||
#
|
||||
def print_pins():
|
||||
for i in range(len(A)):
|
||||
print(f" A{i:02} - {A[i]}")
|
||||
@ -76,25 +67,29 @@ def print_pins():
|
||||
print(f" OEb - {OEb}")
|
||||
|
||||
|
||||
def set_address(address: int, bits=8):
|
||||
"""
|
||||
set the address pins to the given value
|
||||
"""
|
||||
ad_bin = format(address, f"0{bits}b") # get the x-bit verion if the address, eg 12 -> 00001100
|
||||
for j in range(bits):
|
||||
# print("Address:", address, ad_bin, j)
|
||||
if ad_bin[bits-1-j] == "0":
|
||||
GPIO.output(A[j], 0)
|
||||
elif ad_bin[bits-1-j] == "1":
|
||||
GPIO.output(A[j], 1)
|
||||
return ad_bin
|
||||
def format_number(n, hex_digits=2, bin_digits=8, dec_digits=3, sep=" "):
|
||||
s = ""
|
||||
if not PRINT_HEX and not PRINT_BIN and not PRINT_DEC:
|
||||
print("ERROR: echo: at least one of hex, bin, dec must be set to True")
|
||||
exit(1)
|
||||
if PRINT_HEX: s += "0x" + format(n, f'0{hex_digits}x') + sep
|
||||
if PRINT_BIN: s += "0b" + format(n, f'0{bin_digits}b') + sep
|
||||
if PRINT_DEC: s += format(n, f'0{dec_digits}') + sep
|
||||
return s[:-len(sep)]
|
||||
|
||||
|
||||
def get_bits(i: int):
|
||||
def echo(address: int, value: int, message: str="", mode: str="-", end=None):
|
||||
"""
|
||||
return how many bits are needed to express the number in binary
|
||||
print a message for a given address and value
|
||||
"""
|
||||
return len(bin(i)) - 2 # -2 for the "0x"
|
||||
s = mode + " " "[" + format_number(address, hex_digits=4, bin_digits=15, dec_digits=5) \
|
||||
+ "] {" + format_number(value, hex_digits=2, bin_digits=8, dec_digits=3) + "} " \
|
||||
+ message
|
||||
print(s, end=REP_CHAR if end is None else end)
|
||||
|
||||
|
||||
def clear_line():
|
||||
print(" " * 80, end='\r')
|
||||
|
||||
|
||||
def convert_to_int(v):
|
||||
@ -108,35 +103,71 @@ def convert_to_int(v):
|
||||
return int(v)
|
||||
|
||||
|
||||
def get_8_bit(l: list):
|
||||
for i in range(len(l)):
|
||||
l[i] = format(l[i], f"08b") # get the 8-bit bin value
|
||||
return l
|
||||
|
||||
|
||||
def erase(from_ad=0, to_ad=32767, **keys):
|
||||
def get_n_bits(i: int):
|
||||
"""
|
||||
Write all 1 to the EEPROM
|
||||
WEb controlled
|
||||
return how many bits are needed to express the number in binary
|
||||
"""
|
||||
data = [0xff for i in range(from_ad, to_ad)]
|
||||
write(data, from_ad=from_ad, **keys)
|
||||
print("Erased EEPROM - Done!")
|
||||
return
|
||||
return len(bin(i)) - 2 # -2 for the "0x"
|
||||
|
||||
|
||||
def write_byte(byte, address, verbose=True):
|
||||
def get_bit(value: int, n: int):
|
||||
"""
|
||||
get the n-th bit (0-based)
|
||||
"""
|
||||
return value & (1 << n)
|
||||
|
||||
|
||||
def read_binary_file(filepath, from_ad=0) -> list[int]:
|
||||
with open(filepath, "rb") as file:
|
||||
bindata = []
|
||||
for byte in file.read():
|
||||
bindata.append(byte)
|
||||
return bindata[from_ad:]
|
||||
|
||||
|
||||
|
||||
#
|
||||
# GPIO functions
|
||||
#
|
||||
def setup_io_pins(IOdirection=OUT):
|
||||
# OUT when writing and IN when reading
|
||||
for pin in IO:
|
||||
GPIO.setup(pin, IOdirection)
|
||||
|
||||
def setup_pins():
|
||||
# setup the pins
|
||||
GPIO.setmode(GPIO.BCM)
|
||||
for pin in controls:
|
||||
GPIO.setup(pin, OUT, initial=1) # inverted, is 1 means disable
|
||||
for pin in A:
|
||||
GPIO.setup(pin, OUT, initial=0)
|
||||
setup_io_pins(IN)
|
||||
|
||||
|
||||
|
||||
|
||||
def cleanup():
|
||||
GPIO.cleanup()
|
||||
|
||||
|
||||
def set_address(address: int, bits=15):
|
||||
"""
|
||||
set the address pins to the given value
|
||||
"""
|
||||
for j in range(bits):
|
||||
GPIO.output(A[j], get_bit(address, j))
|
||||
|
||||
|
||||
def write_byte(byte: int, address: int, verbose=True, debug=False):
|
||||
if verbose: echo(address, byte, mode="w")
|
||||
|
||||
GPIO.output(OEb, 1)
|
||||
# setup the address
|
||||
ad_bin = set_address(address, bits=15)
|
||||
setup_io_pins(OUT)
|
||||
set_address(address, bits=15)
|
||||
setup_io_pins(OUT)
|
||||
# Setup Data
|
||||
for j in range(8):
|
||||
if byte[7-j] == "1":
|
||||
bit = 1
|
||||
else:
|
||||
bit = 0
|
||||
GPIO.output(IO[j], bit)
|
||||
GPIO.output(IO[j], get_bit(byte, j))
|
||||
# wait "Address" Setup Time
|
||||
sleep(t_AS)
|
||||
# wait "Data Setup Time"
|
||||
@ -149,6 +180,12 @@ def write_byte(byte, address, verbose=True):
|
||||
# wait until minimum write pulse width is reached. in theory, should be t_WP-t_DS but this caused problems
|
||||
sleep(t_WP)
|
||||
|
||||
if debug:
|
||||
clear_line()
|
||||
echo(address, byte, mode="w", message="DEBUG: Press enter to continue")
|
||||
input()
|
||||
|
||||
|
||||
# End Write Pulse -> disable WEb
|
||||
GPIO.output(WEb, 1)
|
||||
GPIO.output(CEb, 1)
|
||||
@ -177,11 +214,9 @@ def write_byte(byte, address, verbose=True):
|
||||
timeout = 1e3
|
||||
timeout += 1
|
||||
GPIO.output(CEb, 1)
|
||||
if verbose:
|
||||
print(f"Writing:\t0b{format(address, '015b')} - 0b{byte} ||| 0x{format(address, '04x')} - {hex(int(byte, 2))}")
|
||||
|
||||
|
||||
def read_byte(address):
|
||||
def read_byte(address: int, verbose=True, debug=False) -> int:
|
||||
GPIO.output(WEb, 1)
|
||||
setup_io_pins(IN)
|
||||
# set the address valid
|
||||
@ -194,85 +229,111 @@ def read_byte(address):
|
||||
# wait the "Address to Output Delay" until the output is valid
|
||||
sleep(t_ACC)
|
||||
|
||||
byte = ""
|
||||
|
||||
byte = 0
|
||||
for j in range(8):
|
||||
if GPIO.input(IO[7-j]) == 1:
|
||||
byte += "1"
|
||||
else:
|
||||
byte += "0"
|
||||
byte |= (GPIO.input(IO[j]) << j)
|
||||
|
||||
if debug:
|
||||
clear_line()
|
||||
echo(address, byte, mode="r", message="DEBUG: Press enter to continue")
|
||||
input()
|
||||
|
||||
# high in OEb and CEb -> disable
|
||||
GPIO.output(OEb, 1)
|
||||
GPIO.output(CEb, 1)
|
||||
return int(byte, 2)
|
||||
|
||||
if verbose: echo(address, byte, mode="r")
|
||||
|
||||
return byte
|
||||
|
||||
|
||||
def read(from_ad=0, to_ad=255, delay=1e-3, ignore=[0xff], verbose=True, single_step=False, compare=None):
|
||||
#
|
||||
# FUNCTIONS
|
||||
#
|
||||
def read(from_ad=0, to_ad=255, delay=1e-3, ignore=[0xff], debug=False, compare:list[int]=[], verbose=True) -> list[int]:
|
||||
"""
|
||||
from_ad: start address from where to read
|
||||
to_ad: end address to read to
|
||||
delay: delay between readings in s
|
||||
verbose wether to print the reading
|
||||
ignore list of values which are not printed
|
||||
verbose: wether to print the reading
|
||||
ignore: list of values which are not printed
|
||||
"""
|
||||
content = []
|
||||
unequal = []
|
||||
|
||||
for i in range(from_ad, to_ad + 1):
|
||||
byte = read_byte(i)
|
||||
byte = read_byte(i, verbose=verbose, debug=debug)
|
||||
content.append(byte)
|
||||
|
||||
if not compare and verbose and not byte in ignore:
|
||||
print(f"Reading:\t0b{format(i, '015b')} - 0b{format(byte, '08b')} ||| 0x{format(i, '04x')} - 0x{format(byte, '02x')}")
|
||||
elif compare:
|
||||
if not compare[i] == byte:
|
||||
if compare:
|
||||
if not compare[i-from_ad] == byte:
|
||||
unequal.append(i)
|
||||
print(f"Unequal at Address 0x{format(i, '04x')} ||| File: 0x{format(compare[i], '02x')} vs EEPROM: 0x{format(byte, '02x')}")
|
||||
echo(i, byte, "vs {" + format_number(compare[i-from_ad], hex_digits=2, bin_digits=8, dec_digits=3) + "} in file", mode="c", end="\n")
|
||||
|
||||
# wait artifical delay
|
||||
sleep(delay)
|
||||
if single_step:
|
||||
input("Press Return to read the next byte")
|
||||
clear_line()
|
||||
if compare:
|
||||
return unequal
|
||||
return content
|
||||
|
||||
|
||||
def write(content: list, from_ad=0, delay=0, single_step=False, verbose=True, check_written=True):
|
||||
def write(content: list[int], from_ad=0, delay=0, debug=False, only_diff=True, verbose=True, check_written=True):
|
||||
"""
|
||||
Write a list if bytes to the eeprom.
|
||||
WEb controlled
|
||||
"""
|
||||
or_content = content.copy()
|
||||
content = get_8_bit(content)
|
||||
to_ad = from_ad+len(content)-1
|
||||
current_content = []
|
||||
if only_diff:
|
||||
print(f"Reading EEPROM and only writing deviating values")
|
||||
current_content = read(from_ad, to_ad=to_ad, delay=delay, debug=debug, verbose=True)
|
||||
assert len(content) == len(current_content)
|
||||
failed = []
|
||||
print(f"Writing to EEPROM: {len(content)} bytes from address {hex(from_ad)}.")
|
||||
print(f"Writing to EEPROM: {len(content)} bytes from address {format(from_ad, '04x')} to {format(to_ad, '04x')}.")
|
||||
|
||||
for i in range(len(content)):
|
||||
write_byte(content[i], from_ad + i, verbose=verbose)
|
||||
# wait artifical delay
|
||||
sleep(delay)
|
||||
if single_step:
|
||||
input("Press Return to write the next byte")
|
||||
if not only_diff or (only_diff and content[i] != current_content[i]):
|
||||
write_byte(content[i], from_ad + i, verbose=True, debug=debug)
|
||||
# wait artifical delay
|
||||
sleep(delay)
|
||||
clear_line()
|
||||
print("Write to EEPROM - Done!")
|
||||
if check_written:
|
||||
print("Comparing EEPROM to file...")
|
||||
failed = read(from_ad=from_ad, delay=delay, single_step=single_step, verbose=False, compare=or_content)
|
||||
while len(failed) > 0:
|
||||
failed = read(from_ad=from_ad, to_ad=to_ad, delay=delay, debug=debug, verbose=False, compare=content)
|
||||
retries = 1
|
||||
while len(failed) > 0 and retries > 0:
|
||||
print(f"Found {len(failed)} bytes deviating from the file - retrying: {retries} times")
|
||||
for ad in failed:
|
||||
write_byte(content[ad], ad, verbose=verbose)
|
||||
failed = read(from_ad=from_ad, delay=delay, single_step=single_step, verbose=False, compare=or_content)
|
||||
write_byte(content[ad-from_ad], ad, verbose=verbose)
|
||||
failed = read(from_ad=from_ad, to_ad=to_ad, delay=delay, debug=debug, verbose=False, compare=content)
|
||||
retries -= 1
|
||||
clear_line()
|
||||
print("Comparing complete")
|
||||
if len(failed) > 0:
|
||||
print(f"Errors occured: {len(failed)} values could not be written:")
|
||||
print("[", end="")
|
||||
for ad in failed:
|
||||
print(format(ad, '04x'), end=",")
|
||||
print("]")
|
||||
return
|
||||
|
||||
def get_bytes(filepath, from_ad=0):
|
||||
with open(filepath, "rb") as file:
|
||||
bindata = []
|
||||
for byte in file.read():
|
||||
bindata.append(byte)
|
||||
return bindata[from_ad:]
|
||||
|
||||
def erase(from_ad=0, to_ad=32767, **keys):
|
||||
"""
|
||||
Write all 1 to the EEPROM
|
||||
WEb controlled
|
||||
"""
|
||||
data = [0xff for i in range(from_ad, to_ad)]
|
||||
write(data, from_ad=from_ad, **keys)
|
||||
print("Erased EEPROM - Done!")
|
||||
return
|
||||
|
||||
|
||||
def main():
|
||||
global REP_CHAR, PRINT_BIN, PRINT_DEC, PRINT_HEX
|
||||
parser = argparse.ArgumentParser(
|
||||
prog="AT28C256-EEPROM Writer",
|
||||
description="Read and write from/to an AT28C256 EEPROM via the Raspberry Pi 4's GPIO pins\n2023 Matthias Quintern",
|
||||
@ -284,32 +345,46 @@ def main():
|
||||
parser.add_argument("--erase", "-e", dest="erase", action="store_true", default=False, help="erase the contents of the EEPROM")
|
||||
parser.add_argument("--file", "-f", metavar="file", dest="file", action="store", default="", help="file for --write and --compare")
|
||||
parser.add_argument("--from", metavar="start-address", dest="from_ad", action="store", default=0, type=convert_to_int, help="start at address x")
|
||||
parser.add_argument("--to", metavar="end-address", dest="to_ad", action="store", default=32767, type=convert_to_int, help="end at address y (inclusive)")
|
||||
parser.add_argument("--single-step", dest="single_step", action="store_true", default=False, help="single step the program")
|
||||
parser.add_argument("--delay", dest="delay", metavar="delay", action="store", default=0, help="extra delay between cycles")
|
||||
parser.add_argument("--to", metavar="end-address", dest="to_ad", action="store", default=0x7fff, type=convert_to_int, help="end at address y (inclusive)")
|
||||
parser.add_argument("--debug", dest="debug", action="store_true", default=False, help="stop the program after setting up the address")
|
||||
parser.add_argument("--delay", dest="delay", metavar="delay", action="store", type=float, default=0.0, help="extra delay between cycles")
|
||||
parser.add_argument("--ignore", dest="ignore", metavar="numbers", action="store", nargs="*", type=convert_to_int, default=[0x100], help="ignore the numbers a b ... Default=[0xff]")
|
||||
parser.add_argument("--verbose", dest="verbose", action="store_true", default=False, help="increase verbosity")
|
||||
parser.add_argument("--verbose", "-v", dest="verbose", action="store_true", default=False, help="increase verbosity")
|
||||
parser.add_argument("--print-pins", dest="print_pins", action="store_true", default=False, help="print the pin layout and exit")
|
||||
parser.add_argument("--no-hex", dest="no_hex", action="store_true", default=False, help="Dont print values hex")
|
||||
parser.add_argument("--bin", dest="bin", action="store_true", default=False, help="Print values in binary")
|
||||
|
||||
args = parser.parse_args()
|
||||
|
||||
if (args.write or args.compare) and not args.file:
|
||||
parser.error('--file is required with --write and --compare')
|
||||
|
||||
if not args.verbose: REP_CHAR = '\r'
|
||||
if args.no_hex: PRINT_HEX = False
|
||||
if args.bin: PRINT_BIN = True
|
||||
|
||||
if args.print_pins:
|
||||
print_pins()
|
||||
exit(0)
|
||||
if args.erase:
|
||||
erase(from_ad=args.from_ad, to_ad=args.to_ad, delay=args.delay, single_step=args.single_step, verbose=args.verbose)
|
||||
erase(from_ad=args.from_ad, to_ad=args.to_ad, delay=args.delay, debug=args.debug, verbose=args.verbose)
|
||||
if args.write:
|
||||
write(get_bytes(args.file, from_ad=args.from_ad), from_ad=args.from_ad, delay=args.delay, single_step=args.single_step, verbose=args.verbose)
|
||||
write(read_binary_file(args.file, from_ad=args.from_ad), from_ad=args.from_ad, delay=args.delay, debug=args.debug, verbose=args.verbose)
|
||||
if args.read:
|
||||
read(from_ad=args.from_ad, to_ad=args.to_ad, delay=args.delay, single_step=args.single_step, verbose=args.verbose, ignore=args.ignore)
|
||||
read(from_ad=args.from_ad, to_ad=args.to_ad, delay=args.delay, debug=args.debug, verbose=args.verbose, ignore=args.ignore)
|
||||
if args.compare:
|
||||
compare(from_ad=args.from_ad, to_ad=args.to_ad, delay=args.delay, single_step=args.single_step, verbose=args.verbose, ignore=args.ignore, compare=get_bytes(args.file))
|
||||
unequal = read(from_ad=args.from_ad, to_ad=args.to_ad, delay=args.delay, debug=args.debug, verbose=args.verbose, ignore=args.ignore, compare=read_binary_file(args.file))
|
||||
print(f"Found {len(unequal)} deviating values")
|
||||
|
||||
|
||||
if __name__ == '__main__':
|
||||
atexit.register(cleanup)
|
||||
setup_address_control_pins()
|
||||
setup_pins()
|
||||
main()
|
||||
|
||||
# PRINT_BIN = True
|
||||
# for i in range(15):
|
||||
# address = (1 << i)
|
||||
# PRINT_BIN = True
|
||||
# set_address(address=address)
|
||||
# input(f"DEBUG: {format_number(address, hex_digits=4, bin_digits=15)}")
|
||||
|
||||
Loading…
Reference in New Issue
Block a user