diff --git a/monitor.py b/monitor.py
deleted file mode 100644
index 418286d..0000000
--- a/monitor.py
+++ /dev/null
@@ -1,71 +0,0 @@
-import RPi.GPIO as GPIO
-from RPi.GPIO import IN
-
-# Monitor the 6502 processor
-gpio_l = [2, 3, 4, 17, 27, 22, 10, 9, 11, 5, 6, 13, 19, 26]
-gpio_r = [14, 15, 18, 23, 24, 25, 8, 7, 12, 16, 20, 21]
-#
-# Defining which 6502 pin goes to which GPIO pin
-#
-
-A = gpio_l[0:12]
-A.reverse()         # first 11 address pins, left side of 6502
-A += [23, 18, 15, 14]    # last 4 address pins
-
-D = gpio_r[-8:]  # 8 io pins
-D.reverse()
-
-PHI2 = 26
-RWB = 19
-
-GPIO.setmode(GPIO.BCM)
-
-# OUT when writing and IN when reading
-for pin in [PHI2, RWB]:
-    GPIO.setup(pin, IN)
-
-for pin in A:
-    GPIO.setup(pin, IN)
-
-for pin in D:
-    GPIO.setup(pin, IN)
-
-def print_pins():
-    for i in range(len(A)):
-        print(f"A{i} - {A[i]}")
-    for i in range(len(D)):
-        print(f"D{i} - {D[i]}")
-    print(f"PHI2 - {PHI2}")
-    print(f"RWB - {RWB}")
-
-def start_monitor():
-    run = True
-    while run:
-        # wait for a rising clock edge before outputting
-        channel = GPIO.wait_for_edge(PHI2, GPIO.FALLING, timeout=1000)    # at least every 1 seconds
-        if channel is None:
-            continue
-        address = ""
-        data = ""
-        for i in range(len(A)):
-            address += str(GPIO.input(A[len(A)-1-i]))
-        for i in range(len(D)):
-            data += str(GPIO.input(D[len(D)-1-i]))
-        if GPIO.input(RWB):
-            rwb = "r"
-        else:
-            rwb = "w"
-        line = f"0b{address} - 0b{data}|||0x{format(int(address, 2), '04x')} - 0x{format(int(data, 2), '02x')}|||{rwb} "
-        print(line)
-
-
-print_pins()
-try:
-    start_monitor()
-except KeyboardInterrupt:
-    GPIO.cleanup()
-
-
-
-
-
diff --git a/opcodes.py b/opcodes.py
deleted file mode 100644
index 799c941..0000000
--- a/opcodes.py
+++ /dev/null
@@ -1,23 +0,0 @@
-opcodes_d = {
-
-        # branches
-        0xf0:   "beq r",
-        0xd0:   "bne r",
-        # jump
-        0x4c:   "jmp a",
-        0x20:   "jsr s",
-        0x60:   "rts s",
-        # load
-        0xad:   "lda a",
-        0xa9:   "lda #",
-        0xa2:   "ldx #",
-        # store
-        0x8d:   "sta a",
-        # compare
-        0xc9:   "cmp #",
-        # increments
-        0xee:   "inc a",
-        0x1a:   "inc A",
-        0xe8:   "inx i",
-
-}