use argparse

eeprom.py

@@ -1,8 +1,11 @@
-from sys import argv
+#!/bin/env python3
+from sys import exit
 from time import sleep
 from RPi.GPIO import IN, OUT
 import RPi.GPIO as GPIO
 from re import fullmatch
+import argparse
+import atexit
 # EEPROM AT28C256 Pin names and RPi GPIO Pin Numbers
 # b means bar = inverted
 
@@ -13,12 +16,16 @@ gpio_r = [14, 15, 18, 23, 24, 25, 8, 7, 12, 16, 20, 21]
 # Defining which 6502 pin goes to which GPIO pin
 #
 
-A = [27, 22, 10, 9, 11, 5, 6, 13,
+A = [
-     17, 4, 3, 2, 
+     # 27, 22, 10, 9, 11, 5, 6, 13,
-     23, 18, 15] 
+        13, 6, 5, 11, 9, 10, 22, 27,  # A0 - A7
+        2, 3, 4, 17,  # A8 - A11
+        23, 18, 15  # A12 - A14
+]
 
-IO = gpio_r[4:12]  # 8 io pins
+# IO = gpio_r[4:12]  # 8 io pins
-IO.reverse()
+# IO.reverse()
+IO = [ 24, 25, 8, 7, 12, 16, 20, 21 ]
 
 OEb = 26    # Output Enable
 WEb = 19    # Write Enable
@@ -40,28 +47,33 @@ t_DH = 0            # Data Hold Time
 t_WPH = 50 * 1e-9   # Write Puls High
 # t_WPH = 50 * 1e-4   # Write Pulse High !!!2*e5 longer than in Datasheet, since shorter high caused Problems with my Chip!!!
 
-# setup the pins
-GPIO.setmode(GPIO.BCM)
-for pin in controls:
-    GPIO.setup(pin, OUT, initial=1)  # inverted, is 1 means disable
-for pin in A:
-    GPIO.setup(pin, OUT, initial=0)
 
 
-def setup_pins(IOdirection=OUT):
+def setup_address_control_pins():
+    # setup the pins
+    GPIO.setmode(GPIO.BCM)
+    for pin in controls:
+        GPIO.setup(pin, OUT, initial=1)  # inverted, is 1 means disable
+    for pin in A:
+        GPIO.setup(pin, OUT, initial=0)
+
+def setup_io_pins(IOdirection=OUT):
      # OUT when writing and IN when reading
     for pin in IO:
         GPIO.setup(pin, IOdirection)
 
+def cleanup():
+    GPIO.cleanup()
+
 
 def print_pins():
     for i in range(len(A)):
-        print(f"A{i} - {A[i]}")
+        print(f" A{i:02} - {A[i]}")
     for i in range(len(IO)):
-        print(f"IO{i} - {IO[i]}")
+        print(f"IO{i:02} - {IO[i]}")
-    print(f"CEb - {CEb}")
+    print(f" CEb - {CEb}")
-    print(f"WEb - {WEb}")
+    print(f" WEb - {WEb}")
-    print(f"OEb - {OEb}")
+    print(f" OEb - {OEb}")
 
 
 def set_address(address: int, bits=8):
@@ -85,20 +97,23 @@ def get_bits(i: int):
     return len(bin(i)) - 2  # -2 for the "0x"
 
 
-def check_valid_list(l: list, bits=8):
+def convert_to_int(v):
     """
-    check if the list only has x-bit binary numbers
+    convert 0xABC and 0b0101 to int
     """
-    for line in l:
+    if type(v) == str and fullmatch(f"0x[0-9,a-f,A-F]+", v):
-        if not fullmatch("[01]{8}", line):
+        return int(v.replace("0x", ""), 16)
-            return False
+    elif type(v) == str and fullmatch(f"0b[0]+", v):
-    return True
+        return int(v.replace("0b", ""), 2)
+    return int(v)
+
 
 def get_8_bit(l: list):
     for i in range(len(l)):
         l[i] =  format(l[i], f"08b")  # get the 8-bit bin value
     return l
 
+
 def erase(from_ad=0, to_ad=32767, **keys):
     """
     Write all 1 to the EEPROM
@@ -114,7 +129,7 @@ def write_byte(byte, address, verbose=True):
     GPIO.output(OEb, 1)
     # setup the address
     ad_bin = set_address(address, bits=15)
-    setup_pins(OUT) 
+    setup_io_pins(OUT) 
     # Setup Data
     for j in range(8):
         if byte[7-j] == "1":
@@ -143,7 +158,7 @@ def write_byte(byte, address, verbose=True):
 
     GPIO.output(CEb, 0)
     GPIO.cleanup(IO)
-    setup_pins(IN)
+    setup_io_pins(IN)
 
     # check the toggle bit IO6, if it stops toggling the write is done
     timeout = 0
@@ -165,9 +180,10 @@ def write_byte(byte, address, verbose=True):
     if verbose:
         print(f"Writing:\t0b{format(address, '015b')} - 0b{byte} ||| 0x{format(address, '04x')} - {hex(int(byte, 2))}")
 
+
 def read_byte(address):
     GPIO.output(WEb, 1)
-    setup_pins(IN)
+    setup_io_pins(IN)
     # set the address valid
     ad_bin = set_address(address, bits=15)
 
@@ -190,6 +206,7 @@ def read_byte(address):
     GPIO.output(CEb, 1)
     return int(byte, 2)
 
+
 def read(from_ad=0, to_ad=255, delay=1e-3, ignore=[0xff], verbose=True, single_step=False, compare=None):
     """
     from_ad:    start address from where to read
@@ -219,6 +236,7 @@ def read(from_ad=0, to_ad=255, delay=1e-3, ignore=[0xff], verbose=True, single_s
         return unequal
     return content
 
+
 def write(content: list, from_ad=0, delay=0, single_step=False, verbose=True, check_written=True):
     """
     Write a list if bytes to the eeprom.
@@ -254,100 +272,44 @@ def get_bytes(filepath, from_ad=0):
     return bindata[from_ad:]
 
 
-action = None
+def main():
-file = None
+    parser = argparse.ArgumentParser(
-from_ad = 0
+        prog="AT28C256-EEPROM Writer",
-to_ad = 32767  #2^15 -1 
+        description="Read and write from/to an AT28C256 EEPROM via the Raspberry Pi 4's GPIO pins\n2023 Matthias Quintern",
-delay = 0
+        epilog="Numbers can be passed as int, hex prefixed with '0x' and binary prefixed with '0b'",
-single_step = False
+    )
-verbose = False
+    parser.add_argument("--write", "-w", dest="write", action="store_true", default=False, help="write binary file onto the EEPROM")
-ignore = [0xff]
+    parser.add_argument("--compare", "-c", dest="compare", action="store_true", default=False, help="compare EEPROM content to binary file")
-content = []
+    parser.add_argument("--read", "-r", dest="read", action="store_true", default=False, help="read the contents of the EEPROM")
-
+    parser.add_argument("--erase", "-e", dest="erase", action="store_true", default=False, help="erase the contents of the EEPROM")
-if len(argv) > 1:
+    parser.add_argument("--file", "-f", metavar="file", dest="file", action="store", default="", help="file for --write and --compare")
-    for i in range(1, len(argv)):
+    parser.add_argument("--from", metavar="start-address", dest="from_ad", action="store", default=0, type=convert_to_int, help="start at address x")
-        arg = argv[i]
+    parser.add_argument("--to", metavar="end-address", dest="to_ad", action="store", default=32767, type=convert_to_int, help="end at address y (inclusive)")
-        if argv[i-1] == "-w":
+    parser.add_argument("--single-step", dest="single_step", action="store_true", default=False, help="single step the program")
-            action = "write_file"
+    parser.add_argument("--delay", dest="delay", metavar="delay", action="store", default=0, help="extra delay between cycles")
-            file = arg
+    parser.add_argument("--ignore", dest="ignore", metavar="numbers", action="store", nargs="*", type=convert_to_int, default=[0x100], help="ignore the numbers a b ... Default=[0xff]")
-        elif argv[i-1] == "-wh":
+    parser.add_argument("--verbose", dest="verbose", action="store_true", default=False, help="increase verbosity")
-            action = "write_hex"
+    parser.add_argument("--print-pins", dest="print_pins", action="store_true", default=False, help="print the pin layout and exit")
-            content = arg.split(",")
-            for i in range(len(content)):
-                content[i] = int(content[i].replace("0x", ""), 16)
-        elif arg == "-r":
-            action = "read"
-            verbose = True
-        elif argv[i-1] == "-c":
-            action = "compare"
-            file = arg
-            verbose = True
-        elif arg == "-e":
-            action = "erase"
-        elif arg == "-h":
-            action = "help"
-        
-        # Addresses
-        elif argv[i-1] == "--from":
-            if "0x" in arg:
-                from_ad = int(arg.replace("0x", ""), 16)
-            else:
-                from_ad = int(arg)
-        elif argv[i-1] == "--to":
-            if "0x" in arg:
-                to_ad = int(arg.replace("0x", ""), 16)
-            else:
-                to_ad = int(arg)
-        # options
-        elif argv[i-1] == "--delay":
-            delay = float(arg)
-        elif arg == "--single_step":
-            single_step = True
-        elif arg == "--verbose":
-            verbose = True
-        elif argv[i-1] == "--ignore":
-            ignore = arg.split(",")
-            for i in range(len(ignore)):
-                ignore[i] = int(ignore[i].replace("0x", ""), 16)
-
-# print(action, file, from_ad, to_ad)
-if action == "write_file":
-    write(get_bytes(file, from_ad=from_ad), from_ad=from_ad, delay=delay, single_step=single_step, verbose=verbose)
-elif action == "write_hex":
-    write(content, from_ad=from_ad, delay=delay, single_step=single_step, verbose=verbose)
-elif action == "read":
-    read(from_ad=from_ad, to_ad=to_ad, delay=delay, single_step=single_step, verbose=verbose, ignore=ignore)
-elif action == "compare":
-    read(from_ad=from_ad, to_ad=to_ad, delay=delay, single_step=single_step, verbose=verbose, ignore=ignore, compare=get_bytes(file))
-elif action == "erase":
-    erase(from_ad=from_ad, to_ad=to_ad, delay=delay, single_step=single_step, verbose=verbose)
-elif action == "help":
-    print("""
-program options:
-    -w  file        write file
-    -e              erase EEPROM
-    -c              compare EEPROM content to binary file 
-    -r              read EEPROM
-    -h              print this
-    --from x        start at address x (can be int or hex with '0x' prefix))
-    --to y          end at address y
-    --single_step   single step the program
-    --delay t       extra delay t between cycles
-    --verbose       print extra information
-    --ignore a,b,.. ignore the numbers a,b,... (in hex) when printing. Default is 0xff
-if no option is given the GPIO-Pin-settings are printed
-          """)
-else:
-    print("No valid action given. Printing Pin-Settings")
-    print_pins()
-# if performing action from this script, put the code HERE:
-
-
-GPIO.cleanup()
-
-
 
+    args = parser.parse_args()
 
+    if (args.write or args.compare) and not args.file:
+        parser.error('--file is required with --write and --compare')
 
+    if args.print_pins:
+        print_pins()
+        exit(0)
+    if args.erase:
+        erase(from_ad=args.from_ad, to_ad=args.to_ad, delay=args.delay, single_step=args.single_step, verbose=args.verbose)
+    if args.write:
+        write(get_bytes(args.file, from_ad=args.from_ad), from_ad=args.from_ad, delay=args.delay, single_step=args.single_step, verbose=args.verbose)
+    if args.read:
+        read(from_ad=args.from_ad, to_ad=args.to_ad, delay=args.delay, single_step=args.single_step, verbose=args.verbose, ignore=args.ignore)
+    if args.compare:
+        compare(from_ad=args.from_ad, to_ad=args.to_ad, delay=args.delay, single_step=args.single_step, verbose=args.verbose, ignore=args.ignore, compare=get_bytes(args.file))
 
 
+if __name__ == '__main__':
+    atexit.register(cleanup)
+    setup_address_control_pins()
+    main()