133 lines
4.7 KiB
Plaintext
133 lines
4.7 KiB
Plaintext
;;********************************************************************************
|
|
;; @module IO-W65C22
|
|
;; @type utility
|
|
;; @device Western Design - W65C22N Versatile Interface Adapter
|
|
;; @details
|
|
;;********************************************************************************
|
|
|
|
.ifndef INCLUDE_IOW65C22
|
|
INCLUDE_IOW65C22 = 1
|
|
|
|
.scope IO
|
|
|
|
; not using a struct for this since the syntax for access would be the same,
|
|
; ie label+IO::RA
|
|
.enum
|
|
; IO-CHIPS OFFSETS FOR PINS FROM BASE ADDRESS
|
|
RB = $0 ; Register B (ORB/IRB)
|
|
RA = $1 ; Register A (ORA/IRA)
|
|
DDRB = $2 ; Data Direction Register B
|
|
DDRA = $3 ; Data Direction Register A
|
|
T1CL = $4 ; Timer 1 Counter Low/High
|
|
T1CH = $5
|
|
T1LL = $6 ; Timer 1 Latch Low/High
|
|
T1LH = $7
|
|
T2CL = $8 ; Timer 2 Counter Low/High
|
|
T2CH = $9
|
|
SR = $a ; Shift Register
|
|
ACR = $b ; Auxiliary Control Register
|
|
PCR = $c ; Peripheral Control Register
|
|
IFR = $d ; Interrupt Flag Register
|
|
IER = $e ; Interrupt Enable Register
|
|
RANH = $f ; RA without handshake
|
|
.endenum
|
|
|
|
.enum ACR_MASK ; ACR Masks
|
|
PA = %00000001
|
|
PB = %00000010
|
|
SR = %00011100
|
|
T2 = %00100000
|
|
T1 = %11000000
|
|
.endenum
|
|
|
|
.enum ACR ; ACR Settings
|
|
; SR Modes
|
|
SR_DISABLE = %00000000 ; Disabled
|
|
SR_SIN_T2 = %00000100 ; Shift in under control of T2
|
|
SR_SIN_PHI2 = %00001000 ; Shift in under control of PHI2
|
|
SR_SIN_PHIE = %00001100 ; Shift in under control of external clock
|
|
SR_SOUT_FREE_T2 = %00010000 ; Shift out free running at T2 rate
|
|
SR_SOUT_T2 = %00010100 ; Shift out under control of T2
|
|
SR_SOUT_PHI2 = %00011000 ; Shift out under control of PHI2
|
|
SR_SOUT_PHIE = %00011100 ; Shift out under control of external clock
|
|
; T1 Modes
|
|
T1_IRQ_LOAD = %00000000 ; Timed interrupt each time T1 is loaded
|
|
T1_IRQ_CONT = %01000000 ; Continuous interrupts
|
|
T1_IRQ_LOAD_PB7 = %10000000 ; Timed interrupt each time T1 is loaded - PB7 One Shot output
|
|
T1_IRQ_CONT_PB7 = %11000000 ; Continuous interrupts - PB7 Square wave output
|
|
; T2 Modes
|
|
T2_IRQ_LOAD = %00000000 ; Timed interrupt each time T2 is loaded
|
|
T2_COUNT_PB6 = %00100000 ; Count down with pulsen on PB6
|
|
; Latch
|
|
LATCH_DISABLE = %00000000
|
|
LATCH_ENBLE = %00000000
|
|
.endenum
|
|
|
|
.enum PCR_MASK ; PCR Masks
|
|
CA1 = %00000001 ;
|
|
CA2 = %00001110 ;
|
|
CB1 = %00010000 ;
|
|
CB2 = %11100000 ;
|
|
.endenum
|
|
|
|
.enum PCR
|
|
; CA1 Modes
|
|
CA1_IN_AE = %00000000 ; Input-negative active edge
|
|
CA1_IP_AE = %00000001 ; Input-positive active edge
|
|
; CA2 Modes
|
|
CA2_IN_AE = %00000000 ; Input-negative active edge
|
|
CA2_IN_AE_IRQ_IND= %00000010 ; Independent interrupt input-negative edge
|
|
CA2_IP_AE = %00000100 ; Input-positive active edge
|
|
CA2_IP_AE_IRQ_IND= %00000110 ; Independent interrupt input-positive edge
|
|
CA2_IN_HANDSHAKE = %00001000 ; Handshake output
|
|
CA2_IN_PULSE_OUT = %00001010 ; Pulse output
|
|
CA2_IN_LOW_OUT = %00001100 ; Low output
|
|
CA2_IN_HIGH_OUT = %00001110 ; High output
|
|
; CB1 Modes
|
|
CB1_IN_AE = %00000000 ; Input-negative active edge
|
|
CB1_IP_AE = %00010000 ; Input-positive active edge
|
|
; CB2 Modes
|
|
CB2_IN_AE = %00000000 ; Input-negative active edge
|
|
CB2_IN_AE_IRQ_IND= %00100000 ; Independent interrupt input-negative edge
|
|
CB2_IP_AE = %01000000 ; Input-positive active edge
|
|
CB2_IP_AE_IRQ_IND= %01100000 ; Independent interrupt input-positive edge
|
|
CB2_IN_HANDSHAKE = %10000000 ; Handshake output
|
|
CB2_IN_PULSE_OUT = %10100000 ; Pulse output
|
|
CB2_IN_LOW_OUT = %11000000 ; Low output
|
|
CB2_IN_HIGH_OUT = %11100000 ; High output
|
|
.endenum
|
|
|
|
; IFR/IER bits
|
|
.enum IRQ
|
|
CA2 = %00000001
|
|
CA1 = %00000010
|
|
SR = %00000100
|
|
CB2 = %00001000
|
|
CB1 = %00010000
|
|
T2 = %00100000
|
|
T1 = %01000000
|
|
IRQ = %10000000
|
|
.endenum
|
|
|
|
;;********************************************************************************
|
|
;; @macro Enable an interrupt source
|
|
;; @modifies: A
|
|
;; @param flag: A flag of the interrupt flag register (IO:IRQ)
|
|
;;********************************************************************************
|
|
.macro IO_EnableIRQ ioaddr, flag
|
|
lda #(IO::IRQ::IRQ | flag)
|
|
sta ioaddr + IO::IER
|
|
.endmacro
|
|
;;********************************************************************************
|
|
;; @macro Disable an interrupt source
|
|
;; @modifies: A
|
|
;; @param flag: A flag of the interrupt flag register (IO:IRQ)
|
|
;;********************************************************************************
|
|
.macro IO_DisableIRQ ioaddr, flag
|
|
lda #flag
|
|
sta ioaddr + IO::IER
|
|
.endmacro
|
|
|
|
.endscope ; IO
|
|
.endif ; guard
|