wip: irq

main.s65

@@ -54,7 +54,7 @@
 ; Interrupts
 ;********************************************************************************    
 .zeropage
-IRQ_VAR:    .res 1
+irq_via_ifr:    .res 1
 .code
 nmi:
     lda #'%'
@@ -62,26 +62,22 @@ nmi:
     rti
 irq:
     ; read IRFs, while bit 7 ist set handle interrupts
-; @irq_io1:
+@irq_io1:
-;     lda SPI_IO+IO::IFR
+    lda IO1 + IO::IFR
-;     sta IRQ_VAR
+    sta irq_via_ifr
-    ; bbr7 IRQ_VAR,@irq_io2
+    bbr7 irq_via_ifr,@irq_io1  ; skip
+    bbs2 irq_via_ifr,@irq_kb1  ; shit reg -> first 8 bits
+    bbs5 irq_via_ifr,@irq_kb2  ; timer -> last 3 bits
 @irq_io2:
     lda IO2 + IO::IFR
-    sta IRQ_VAR
+    sta irq_via_ifr
-    bbr7 IRQ_VAR,@irq_return
+    bbr7 irq_via_ifr,@irq_return    ; skip
-    bbs2 IRQ_VAR,@irq_spi_p  ; check SR
+    bbs2 irq_via_ifr,@irq_spi_p     ; check SR
-    bbs1 IRQ_VAR,@irq_keypad  ; check CA1
+    bbs1 irq_via_ifr,@irq_keypad    ; check CA1
 
-    ; 
-    lda IO1+IO::IFR
-    sta IRQ_VAR
-    bbr7 IRQ_VAR,@irq_return
-    bbs2 IRQ_VAR,@irq_kb1  ; shit reg -> first 8 bits
-    bbs5 IRQ_VAR,@irq_kb2  ; timer -> last 3 bits
     ; this SHOULD never be reached
     jsr lcd::clear
-    Print str_irq_unknown
+    Print "Unknown IRQ"
     ; force reset interrupt flags
     lda #$ff
     sta IO1 + IO::IFR
@@ -234,10 +230,6 @@ str_spi_begin:
     .asciiz "---BEGIN  SPI---"
 str_spi_start:
     .asciiz "---START  SPI---"
-str_irq:
-    .asciiz "IRQ detected!   "
-str_irq_unknown:
-    .asciiz "Unknown IRQ src!"
 str_io2:
     .asciiz "IO2::RB='"
 

spicode.s65

@@ -107,9 +107,6 @@ CODE_START:
     bra @loop
 
 
-; .out .sprintf("SPI: CODE_START at %x", *)
-
-
 kbinit:
     lda #'['
     jsr lcd::print_char
@@ -122,6 +119,8 @@ kbinit:
     ; the 3 last bits take about 230us, at @1MHz => wait 230 cycles and then the shift register
     lda #230
     sta kb::KB_IO + IO::T2CL
+    stz key_read
+    stz key_read+1
 
     ; enable SR interrupts
     lda #(IO::IRQ::IRQ | IO::IRQ::SR)
@@ -137,7 +136,7 @@ irq_on_shift_reg:
     lda #'{'
     jsr lcd::print_char
     lda kb::KB_IO + IO::SR
-    sta keycode
+    sta key_read
     stz kb::KB_IO + IO::SR
 
     ; disable SR interrupts
@@ -159,7 +158,7 @@ irq_on_timer:
     lda #'<'
     jsr lcd::print_char
     lda kb::KB_IO + IO::SR
-    sta keycode + 1
+    sta key_read + 1
 
     lda kb::KB_IO + IO::T2CL  ; clear interrupt flag
 
@@ -173,25 +172,29 @@ irq_on_timer:
     stz kb::KB_IO + IO::SR
 
     ; lda #'|'
-    lda keycode
+    lda key_read
     jsr lcd::print_char
-    lda keycode + 1
+    lda key_read + 1
     jsr lcd::print_char
     ; rotate bit 2 (last bit of keycode) into the carry
     ror
     ror
     ror
-    lda keycode  ; not affecting carry
+    lda key_read  ; not affecting carry
     rol  ; rotate carry into byte, rotate startbit into carry
     ; TODO byte is inverted, maybe consider wasting 256 bytes for a bit reverse lookup table?
-    sta keycode + 1
+    sta keycode
     jsr lcd::print_char
 
+    stz key_read
+    stz key_read+1
+
     lda #'>'
     jsr lcd::print_char
     rts
 
-keycode: .res 3
+key_read: .res 2
+keycode:  .res 1
 kb_irq1:
     lda #'!'
     jsr lcd::print_char

system/io_W65C22.h65

@@ -10,6 +10,8 @@ INCLUDE_IOW65C22 = 1
 
 .scope IO
 
+; not using a struct for this since the syntax for access would be the same, 
+; ie label+IO::RA
 .enum
 ; IO-CHIPS OFFSETS FOR PINS FROM BASE ADDRESS
     RB   = $0  ; Register B (ORB/IRB)

system/irq_handler.h65

@@ -0,0 +1,12 @@
+;********************************************************************************
+; @module irq_handler
+; @type system
+;********************************************************************************
+.ifndef INCLUDE_IRQ_HANDLER
+INCLUDE_IRQ_HANDLER = 1
+
+.scope irq
+
+.endscope
+.endif
+

system/irq_handler.s65

@@ -0,0 +1,43 @@
+.include "irq_handler.h65"
+.bss
+
+
+.code
+
+.proc register_via_handler
+.endproc
+
+.proc remove_via_handler
+.endproc
+
+.proc main_handler
+    Print "Unknown IRQ"
+    rti
+.endproc
+
+.zeropage
+tmp: .res 1
+
+.macro VIAHandler via_addr, via_handlers_table
+    lda via_addr + IO::IFR
+    sta tmp
+    bbr7 tmp,@rts  ; irq
+    bbs0 tmp,@ca2
+    bbs1 tmp,@ca1
+    bbs2 tmp,@sr
+    bbs3 tmp,@cb2
+    bbs4 tmp,@cb1
+    bbs5 tmp,@t2
+    bbs6 tmp,@t1
+    ; TODO error, one should have been true
+    stp
+@rts:
+    rts
+@ca2:   jmp (via_handlers_table)
+@ca1:   jmp (via_handlers_table+2)
+@sr:    jmp (via_handlers_table+4)
+@cb2:   jmp (via_handlers_table+6)
+@cb1:   jmp (via_handlers_table+8)
+@t2:    jmp (via_handlers_table+10)
+@t1:    jmp (via_handlers_table+12)
+.endmacro

system/lcd.h65

@@ -22,26 +22,25 @@ LCD_IO = IO1
 Import lcd,init,clear,print,print_char,set_position,set_custom_char
 Import lcd,_cmd,_wait_nbusy,_write_ram,_read_ram
 
-;********************************************************************************
+;;********************************************************************************
-; @macro Clear the screen and print a null-terminated string
+;; @macro Clear the screen and print a null-terminated string
-; @param message: Address of the message
+;; @param message: Address of the message or string literal
-;********************************************************************************
+;; @details
+;;  If message is  a string literal, it will be stored in rodata 
+;;  and the address of this segment will be used
+;;********************************************************************************
 .macro Print message
-    ; .out .sprintf("message is a string literal: '%s' len=%x", message, .strlen(message))
+    jsr lcd::clear
-    .if .match(message, "")
+    .if .match(message, "")  ; message is a string literal -> store in rodata
         .pushseg
         .rodata
 :       .asciiz message
         .popseg
-    .out .sprintf("message is a string literal: '%s' len=%x", message, .strlen(message))
-    jsr lcd::clear
         lda #<:-
         sta ARG0
         lda #>:-
         sta ARG1
-    .else
+    .else ; message is not a string
-    .out "message is a n0t string"
-    jsr lcd::clear
         lda #<message
         sta ARG0
         lda #>message
@@ -51,15 +50,26 @@ Import lcd,_cmd,_wait_nbusy,_write_ram,_read_ram
 .endmacro
 
 
-;********************************************************************************
+;;********************************************************************************
-; @macro Print a null-terminated string
+;; @macro Print a null-terminated string
-; @param message: Address of the message
+;; @param message: Address of the message or string literal
-;********************************************************************************
+;;********************************************************************************
 .macro PrintNC message
+    .if .match(message, "")  ; message is a string literal -> store in rodata
+        .pushseg
+        .rodata
+:       .asciiz message
+        .popseg
+        lda #<:-
+        sta ARG0
+        lda #>:-
+        sta ARG1
+    .else ; message is not a string
         lda #<message
         sta ARG0
         lda #>message
         sta ARG1
+    .endif
     jsr lcd::print
 .endmacro
 

util/string.h65

@@ -31,19 +31,30 @@ Import str, hex_char_to_uint8, hex_str_to_uint, uint8_to_hex_str
 
 ;********************************************************************************
 ; @function Macro for passing arguments to strf
-; @param fmt:   Format string address
+; @param fmt:   Format string address or string literal
 ; @param out:   Output string address
 ; @param x0-x9: Additional parameters
-; @warning Addresses as additional paramteres must be passed like this `#<addr,#>addr`
+; @warning Addresses as additional paramters must be passed like this `#<addr,#>addr`
 ; @modifies: A, X, Y
 ; @see strf
 ;********************************************************************************
 .macro Strf fmt,out,x0,x1,x2,x3,x4,x5,x6,x7,x8,x9
     @N_ARGS .set 0  ; @ so that it doesnt break cheap labels
+     .if .match(fmt, "")  ; fmt is a string literal -> store in rodata
+        .pushseg
+        .rodata
+:       .asciiz fmt
+        .popseg
+        lda #<:-
+        sta ARG0
+        lda #>:-
+        sta ARG1
+    .else ; message is not a string
         lda #<fmt
         sta ARG0
         lda #>fmt
         sta ARG1
+    .endif
     lda #<out
     sta ARG2
     lda #>out
@@ -56,8 +67,10 @@ Import str, hex_char_to_uint8, hex_str_to_uint, uint8_to_hex_str
     _StrfStoreArg x5
     _StrfStoreArg x6
     _StrfStoreArg x7
+    _StrfStoreArg x8
+    _StrfStoreArg x9
     jsr str::strf
-    .out .sprintf("info: Strf: called with %d arguments", @N_ARGS)
+    ; .out .sprintf("info: Strf: called with %d arguments", @N_ARGS)
 .endmacro
 
 ; TODO allocate zp memory